How to Frame a Shower Niche in a Load-bearing Wall
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2020
- Jan 27th, 2022: 98% like/dislike
In this video I explain and demonstrate how to frame in a shower niche on a load bearing wall. If you do this on a non load bearing wall the process is even easier as you would just use a normal top plate instead of a full header.
Edit: I got my Schluter insert in and realized the measurements were for the insert opening, not the rough opening. It was a simple fix by moving the jack/king studs each 1/2 inch out, and the sill plate down and inch, and remaking the header 1 inch longer. Pretty annoying but a relatively easy fix.
Tools/products used:
Palm Nailer: amzn.to/3aRMsln
Dewalt 10-piece tool kit: amzn.to/3nAJSVX
Dewalt drill/driver combo: amzn.to/3aSL95T
Simpson joist hangers: amzn.to/3eFMe1P
Dewalt laser level: amzn.to/3eJjNjA
PEX crimping tool: amzn.to/333feuZ
PEX cutting tool: amzn.to/330QnIh
PEX crimp rings: amzn.to/2R6ARbc
PEX J-hooks: amzn.to/3nywim8
Wood float: amzn.to/3eCPFX8
Stainless steel trowel set: amzn.to/3eGuHql
Schluter drain kit: amzn.to/3xBaI51
Respirator: amzn.to/33oCMee
Filters: amzn.to/33ktPm0
Camera equipment:
Gopro Hero 8: amzn.to/33mR7aR
Jobi handheld tripod: amzn.to/3uwOLSM
Standard tripod: amzn.to/3vQYrrk
Cell phone tripod: amzn.to/2PXzo6X - ภาพยนตร์และแอนิเมชัน
Many other videos from the pros putting on niches and they don't put in a proper header, you did good work.
This video is very informative!
Thank you
Would love to see your finished work
Super helpful as I am about to do exactly that project. I was looking for a video like this one. Thanks so much!
Awesome vid. So well explained. Subscribed!
This answered my questions. Thanks.
Great video, I felt much better watching your video and making a niche in my shower.
Great video. I'm a remodeled that avoids cutting into any load bearing wall. I have seen a plumber cut a bunch of studs out of an outside wall without any temporary support, when he cut them out they made a an audible pop! Doing it this way just like a window ensures that the wall keeps its strength.
What a thorough job you are doing for this project! I was thinking how to support the wood that were cut out! Thank you so much for the great job!
Thanks!
Great video! Thanks for the informative content
Thanks!
Thank you, great video
Love this. Exactly what I needed to know :-)
This is such an excellent video. The pacing and level of detail is superb. I want to add a recessed medicine cabinet into a load-bearing wall which requires me to cut one stud. Your video makes it seem like a doable task. Thank you!
I appreciate the positive feedback! You are correct, this would be the exact same process for a medicine cabinet. Best of luck with your project!
Does the whole wall need to be demo to do the niche framing on exterior wall?
So, is there no insulation in the area behind the niche (outside wall)?
I don’t see any insulation in that exterior wall? If this is a heated space with insulated walls, I’d recommend leaving the exterior bearing wall intact and furring out the wall for the niche.
So you need a header for every niche on an exterior wall?
I want my shower niche to span the entire width of my shower, which is 4'. What size beam to I need and how many jack studs do I need? I planned for a 2" x 8" header with one king stud and one jack stud on each side. Is that correct?
Probably not the answer you want, but... it depends on several factors. Is this wall load bearing? Are there floors above it? Does your region have snow load? etc etc. Without knowing these answers, in a basic scenario, I would say 2x8 header over a 4 foot span would suffice, and 1 jack stud is probably enough (although you can easily google the code for that relative to your city/county/region). I always go overkill if I can't find any certain data on a project I'm doing.
I guess I have this question. If I'm not exactly sure how high I want the niche to start given what the tile will be and where it will start on the tub I'll later install), can I put the header up higher than I know I will need it and then locate a cross piece (below the header) and then insert a bottom cross piece once I know exactly where to install the niche? Did my question make sense?
Hi David, I believe I understand your questions. Props to you for thinking ahead about the finishing design before putting the bones in place. Now I'm not an engineer, but I would say yes, that would be just fine since the header would still be holding all the load from above and transferring down to the jack studs. I have an exterior door in my house (from the 1950's) where the header is framed as high up as possible (top plate literally sits on top of the header), and the door is framed in to fit below the header. One last thing to consider, is just making sure you have cripples in place (in your case BELOW the header), not so much for structure, but to have adequate nailing for your cement board when you put that up. Best of luck!
@@AtHomeDIY I framed this out on the master bath several years ago. I needed to have the tiling done by a pro who chided me for not locating the niche in a way that made the tiling work out. But it's hard to do that accurately when I need to do the pre-work on dens shield, waterproofing etc. This time I want to do a better job. Thanks.
Hi there! I have a contractor telling me this is extremely expensive to do. I wanted a shower niche to be approx 24-28” high and about 16-20” wide. I purchased one of the inserts but of course my wall is load-bearing. How much roughly would something like this cost? I am going to show this video to my contractor!! Please let me know ASAP and thank you for possibly saving my Dream!!!
Hi Jessica, it is difficult to tell you an exact number as it would be highly dependent on many variables. If you are already down to studs this project is extremely easy. If I wasn't filming I could have knocked it out in an hour no problem. A seasoned contractor even less. (I have no idea what contractors charge per hour, but I would assume labor would be well under $100/hr, you can do the math from there understanding that you are also paying for their knowledge and expertise, not just labor). If you're trying to add a niche to an already finished bathroom then the price would go WAY up. I hope that helps.
Can this method be done with a load bearing exterior wall? Any reinforcement need to be added?
That is the exact scenario I'm showing in the video. 2x6 exterior load bearing wall. The header is the important piece, as well as supporting the load while reconfiguring the wall to add the niche.
Thank you for your assistance. I was able to complete my own project following your instructions.
@@fransmith2415 Glad it was helpful and you were successful!