That was truly amazing and a bit unsettling for me, because I recently purchased a 1D X and had no idea what was hidden away under the hood. The power unit on my own model unfortunately failed so needed to be replaced, but the shutter has had less than 2,000 actuations so this particular work will never be needed. Thank you for showing us how it gets done.
Superb video! Apart from a few moments where I cannot see what is being done. Only guess. My 1DXii have been submerged and if full of white flakes and dust that comes out of the house everywhere. Doesn't work since then. I have carefully cleaned everything outside and in compartments. Nice and clean and got the cf/cfast card door and eject smooth again as well as on/lock/off, battery compartment, and external socket doors/connectors. Only two buttons are stuck, and that is the lens eject and the vertical format Depth of filed preview button, both are stuck in their pressed down position. Have not been taken apart ever. I would like to try this and clean every single part inside and reassemble. At least now it's only an expensive paperweight. Kind regards.
if thats the shutter being replaced. it comes to mind that the mirror moves as much as the shutter. doesnt the mirror assembly need replacement by the same time as the shutter? cause it move as much? just some thoughts. i have only been disassembling and repairing lenses so far.
Does anyone know how much does Canon charge to do this? I heard they have to flash the software to the camera after it’s done. I have a 1dx mark ii that shutter assembly needs replacing
Do you have to calibrate anything after the replacement? I think the brass shims between the mirror box and the viewfinder should not be mixed, at least keep one side from the other.
Haiqing, replacing the shutter mechanism doesn’t require you to remove the viewfinder/prism assembly. You are correct that the copper shims are in place to match the viewfinder’s field of view to the sensor (parallax error) and needs to be checked once the mirror finder assembly is removed.
@@pavelantoniadi8339 Thank you! Do you know the exact part number you used? I find conflicting informations on the internet. Anything else you can share, like a repair manual or anything? I swear if I can fix this I'm sending you a donation x)
@@Galf506 part number is CG2-3007 from 1Dx and CG2-4750 from 1Dx mkII. But shutters is the same. You can use both numbers. I aslo has a parts catalog, let me know your email if needed. And remember, you do this at your own risk
the fun part is that you can do it yourself and save a ton of money....no matter if you have the skills or not. just be careful and document every bit of screw and moment....
You can take the screen off a 5D III and put it on the 1Dx. Panels the same, aluminum hardware that holds it in place is different but it’ll screw off.
![ตีสิบเดย์ [FULL] | อาจารย์โอเล่ ญาณสัมผัส ผ่าดวงคนดัง ประเทศไทยจะเป็นยังไงหลังจากนี้!](http://i.ytimg.com/vi/gszT2O76fL4/mqdefault.jpg)
That was truly amazing and a bit unsettling for me, because I recently purchased a 1D X and had no idea what was hidden away under the hood. The power unit on my own model unfortunately failed so needed to be replaced, but the shutter has had less than 2,000 actuations so this particular work will never be needed. Thank you for showing us how it gets done.
Superb video! Apart from a few moments where I cannot see what is being done. Only guess. My 1DXii have been submerged and if full of white flakes and dust that comes out of the house everywhere. Doesn't work since then. I have carefully cleaned everything outside and in compartments. Nice and clean and got the cf/cfast card door and eject smooth again as well as on/lock/off, battery compartment, and external socket doors/connectors. Only two buttons are stuck, and that is the lens eject and the vertical format Depth of filed preview button, both are stuck in their pressed down position. Have not been taken apart ever. I would like to try this and clean every single part inside and reassemble. At least now it's only an expensive paperweight.
Kind regards.
Oh, restoring a camera after water is not easy, and most often impossible. Wish you luck
if thats the shutter being replaced. it comes to mind that the mirror moves as much as the shutter. doesnt the mirror assembly need replacement by the same time as the shutter? cause it move as much? just some thoughts. i have only been disassembling and repairing lenses so far.
Great Guide !!. Do you have a Service Manual for the Canon 1Ds mark 3 ?. I need to replace the Shutter. Thanks
such an amazing job
Does anyone know how much does Canon charge to do this? I heard they have to flash the software to the camera after it’s done. I have a 1dx mark ii that shutter assembly needs replacing
Amazing, how much did the shutter mechanism cost, and is the camera working okay now ?
my 1 Dx mark 2 sensor will be damaged by laser light so how much money are required to purchase new sensor
Amazing!
Do you have to calibrate anything after the replacement? I think the brass shims between the mirror box and the viewfinder should not be mixed, at least keep one side from the other.
I calibrated nothing. The video was created for informational purposes only, this is not a call to repeat my actions
Haiqing, replacing the shutter mechanism doesn’t require you to remove the viewfinder/prism assembly. You are correct that the copper shims are in place to match the viewfinder’s field of view to the sensor (parallax error) and needs to be checked once the mirror finder assembly is removed.
@@pavelantoniadi8339 Thank you!
@@mikek24a Thank you! My 1DX shutter just broke today and I will replace it.
@@haiqing6049 any luck replacing it? A repair service quoted me 900€ for repairs and I'm not paying that, no shot.
would be nice to check focus before shooting
대박 입니다!!! ㅎㄷㄷㄷ
I've just been asked 900€ to repair a 1dx shutter. So, please, can you let us know if this actually worked in the end?
It still working
@@pavelantoniadi8339 Thank you! Do you know the exact part number you used? I find conflicting informations on the internet. Anything else you can share, like a repair manual or anything? I swear if I can fix this I'm sending you a donation x)
@@Galf506 part number is CG2-3007 from 1Dx and CG2-4750 from 1Dx mkII. But shutters is the same. You can use both numbers.
I aslo has a parts catalog, let me know your email if needed.
And remember, you do this at your own risk
A minha tá com problema na placa principal
Where I live, it costs 750$ to do that.
the fun part is that you can do it yourself and save a ton of money....no matter if you have the skills or not. just be careful and document every bit of screw and moment....
Italy? If not, what's the country then?
@@RoiSkatt In Italy I just got quoted 900€ for the entire job. They want to replace the mirror box too, which is insane to me.
Easy!
1dx mark ii eorre 20 how repair
Totally the same. But disassemble process different at some parts
Anyone got info on lcd repair on main screen of Canon 1dx ii..
canon no longer repair the first 1DX they should still repair the 1DX2.
You can take the screen off a 5D III and put it on the 1Dx. Panels the same, aluminum hardware that holds it in place is different but it’ll screw off.
Hi