To those asking about his equipment, the handpiece used is a Lindsay classic engraver on a grs ball vise of some model. Can't account for compressor used but its a quiet one. And for those thinking of rushing out to buy one a setup like that one only comes in around $2,500 if you buy smart. Not that most of the people in this comment section would be able to do anything with such toolage except make a mess.
Beautiful art Mike... It's a pity in some way that talent like yours is seldom seen today. We use computerised systems and while they deliver a quality result, there's nothing like proper hand-engraving.
Hi Mike, love your work I am engraver here in Australia and wondering what the ' chinese white ' is you use for setting out, and where you can purchase it online. At present I rub plasticine over article then lightly smear talcum powder over it, but would like to try your method.
Hi, very nice work that you are doing. Can I ask you want is the white thing you put on the surface so that you could draw on it? Possibly a link of where i can buy it online? Thanks so much yeah.
Sounds like a petrol motor on that? Also a new way to engrave i suppose. Id like to know if that was a craft knife with a point in it that you used to draw the graphics? Thanks and good job
Do you mind sharing what equipment you're using? The Lindsay hand piece is pricey but seems like it's worth the cost - not really sure what else needs to go with it. Thanks for sharing!
Stout Marketing I tried to make one out of my wife's old rear end but it wobbled around way to munch and it just kept going towards the center of it all! Butt good luck and take care!
I learned today that Chinese White is a white water color paint. Perhaps Chinese White has special properties making it particularly good for engraving, but could any white water color paint be used?
What is the alloy? You say, it`s a sterling silver. But, as far as i undestand, sterling means 92% Ag and 8% Cu or about so. But this alloy does not looks that great as the metal in your video. What is it?
it's an airgraver, very expensive bit of kit, google it. huge choice of options, you deffo do NOT want one if you are just starting out. they are pneumatic, compressor etc etc. way to go getting the D's the same size :)
Thank you sir, read this comment clicked on your profile and subscribe to your Channel! Also might I add your work is outstanding and it's not a copyright video LOL ... TRUE Craftsmanship!
dumb ass.. its Steve Lindsay uploading Mike Dubber's videos. If anyone knows Mike Dubber better and knows about copyrighted videos better, it would be Steve. xD
"Then it's just a matter of cutting the letters". You just need thirty years of muscle-memory to back that up. I love watching old masters.
th-cam.com/video/M2aKTFAjQAs/w-d-xo.html
To those asking about his equipment, the handpiece used is a Lindsay classic engraver on a grs ball vise of some model. Can't account for compressor used but its a quiet one. And for those thinking of rushing out to buy one a setup like that one only comes in around $2,500 if you buy smart. Not that most of the people in this comment section would be able to do anything with such toolage except make a mess.
Beautiful art Mike... It's a pity in some way that talent like yours is seldom seen today. We use computerised systems and while they deliver a quality result, there's nothing like proper hand-engraving.
Hi Mike, love your work I am engraver here in Australia and wondering what the ' chinese white ' is you use for setting out, and where you can purchase it online. At present I rub plasticine over article then lightly smear talcum powder over it, but would like to try your method.
this guy is awesome.. met him and shook his hand
Wonderful work
This is awesome. What kind of engraving tool are you using?
Hi, very nice work that you are doing. Can I ask you want is the white thing you put on the surface so that you could draw on it? Possibly a link of where i can buy it online? Thanks so much yeah.
Hello Mike! Nice work! I wonder what tools you are using? Both to ancor the plate and engraving it. I would be very happy for an ansver. BR Sten
yes where can i buy the engraving tool, pen?
Sounds like a petrol motor on that? Also a new way to engrave i suppose. Id like to know if that was a craft knife with a point in it that you used to draw the graphics? Thanks and good job
Nice work 👏👏👏👍🏻
WOW a true artist
inpresionante
As everyone else asked, equipment please? Thanks and nice work
Do you mind sharing what equipment you're using? The Lindsay hand piece is pricey but seems like it's worth the cost - not really sure what else needs to go with it. Thanks for sharing!
You can also use shoe paint. It doesn´t stick to metal.
Sorry for my English, how much cost this machine for graver wark?
Hello sir what kind of engraver do you use?
Mike, what kind of graver machine you use?
Hola what kind of engraver you using?
I have the same question. Thanks
Do you mind sharing what equipment you are using?
Amazing, I am guessing that one mistake ruins the work?
the engraving station thing, where can I get one?
Stout Marketing I tried to make one out of my wife's old rear end but it wobbled around way to munch and it just kept going towards the center of it all! Butt good luck and take care!
@@JohnNelson-ft2vd Yes. Same problem here also mate!
Do you think? That it would be possible to make one of those guns out of a tattoo gun???
I learned today that Chinese White is a white water color paint. Perhaps Chinese White has special properties making it particularly good for engraving, but could any white water color paint be used?
Chinese white is a zinc white (don't use permanent/titanium white). You can get it in watercolor or gouache.
Where can I find Chinese White? Please let me know.
Evelyn
Can't find chinese white. What can i use instead? Can i use akrylic paint?
black permanent marker thin pen obviously
I was asking for the thing you put on not what he writes with. I used white acrylic paint
What tool is that
Armis wants one!!
Interesting you can draw left hand, but cut right hand!
me too and Im left handed
The center line (in pencil) from the eye at the top was not centered. I know it didn't make a difference but my OCD had to say something
Mister you have a wery steady hand..........(For an old man)
Your cat is in heat!
What is the alloy? You say, it`s a sterling silver. But, as far as i undestand, sterling means 92% Ag and 8% Cu or about so. But this alloy does not looks that great as the metal in your video. What is it?
it's an airgraver, very expensive bit of kit, google it. huge choice of options, you deffo do NOT want one if you are just starting out. they are pneumatic, compressor etc etc. way to go getting the D's the same size :)
I could draw a face you would think was a photograph but can't write cursive to save my life lol
No... Seriously. That's Bad Ass.
मुझे Dy चाहिए
No end result.
for 7:47 making farting noise with his mouth
Chinese White what...?
Your uploading copyrighted videos from other engravers, you should stop
it labled under education and there for doesnt break copyright laws
That is not how it works, that is not how it works at all
Thank you sir, read this comment clicked on your profile and subscribe to your Channel! Also might I add your work is outstanding and it's not a copyright video LOL ... TRUE Craftsmanship!
dumb ass.. its Steve Lindsay uploading Mike Dubber's videos. If anyone knows Mike Dubber better and knows about copyrighted videos better, it would be Steve. xD
Yeaj. I can't tell you how many times I've buried ONE coin. .so fake
I do wish you Americans would stop calling this machine assisted cutting 'hand engraving' - it isnt