Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece. Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
@Jake Thejeweller thanks for the advice jake.really helpful,could you recommend some metal to sharpen for engraving stainless?have a project :)also could you recommend some tools to buy that id need?
Nice work...i can hear by the knocking of your graver that it seems like you have yours turned down quite a bit more than i was taught..your approach seems a lot more forgiving. I think I'll turned mine down and see if i can be more controlled...question..what do you do about burrs that are kicked up..? Thanks for the video..I always enjoy watching someone who knows what their doing. Thanks again for the video.
This is an EnSet engraver. They are the most expensive and different to other engravers like the graver max. With the enset you can go as low as one single hit by itself at a time.
trekranger depends on the kind of system.. some are foot controlled while some are activated by pushing palm.. both are very easy to handle and requires little to no puahing.. just control the graver speed up or slow down as you wish
not true actually, I got my engraving ball brand new for about 500 and gravers can be bought for a decent price if you are hand engraving. You can even find deals on ebay for some non GRS brand engraving balls.
Look up Shaun Hughes engraving he has videos showing how to make one from things you can buy on ebay for around 100 dollars. Even then though this is no cheap hobby.
You are very talented. It's a joy to watch you engrave.
Your Flat Graver looks to have a slight bend to the left under the scope, does it have that? Very nice cuts! Does your flat graver have relief on the bottom? Enjoyed your video!
I really like your technique and I will have to give it a shot. A really fine demonstration. Thank you.
Nice work and great technique )
I enjoyed it!
Wonderful tutorial. Thank you.
majestic ! you've got skillz.
Just great art! Very well done art and vid Chris.
You r a real artist.
Thank you so much, MAESTRO!!!🙏
I would get so addicted to this if I had the tools!
You can make one for under 65 dollar. TH-cam "Shaun handmade engraving machine".
A friend who is a fitter and turner would be worth their weight in gold to assist in making air graver at a lower cost than usd1500 -2500 for the handpiece.
Of course air is needed to drive it at extra $$$ but much cheaper than the fancy top noch gear costs
Gr8 Work. Im curious as to what type of Microscope to use. You go in close and then go light on Magnification. Your thoughts?
Regards,
Michael
I wish I was this talented
Thanks for the kind words.
Hallo! What is the material of who you graving? And what is the graving tool name?
Beautiful tight work.
You sir are a wizard
Nice Fing job, good video
Thanks for sharing.
what's the name of the tool?Thank you....amazing work.
I wonder, what material are you engraving? Is it copper, gold, brass or something else?
Nice work 😍
what graver are you using?
great stuff, can I ask you how do you hit that ? is it electrical ? o_0 (this is very new to me)
@Jake Thejeweller thanks for the advice jake.really helpful,could you recommend some metal to sharpen for engraving stainless?have a project :)also could you recommend some tools to buy that id need?
Nice work...i can hear by the knocking of your graver that it seems like you have yours turned down quite a bit more than i was taught..your approach seems a lot more forgiving. I think I'll turned mine down and see if i can be more controlled...question..what do you do about burrs that are kicked up..? Thanks for the video..I always enjoy watching someone who knows what their doing. Thanks again for the video.
This is an EnSet engraver. They are the most expensive and different to other engravers like the graver max. With the enset you can go as low as one single hit by itself at a time.
Where can I buy this engraving tool. Please provide me a link for this if possible.
Interesting stuff...
Are you using a light weight for this?
Looks nice
Amazing!
Bravo you are artist
with a pneumatic engraver do you have to push the graver or just control the blade?
trekranger depends on the kind of system.. some are foot controlled while some are activated by pushing palm.. both are very easy to handle and requires little to no puahing.. just control the graver speed up or slow down as you wish
Very nice .....
Wow you the best
Where should one start if they want to start learning engraving?
First you need at least 5000 dollars lol
not true actually, I got my engraving ball brand new for about 500 and gravers can be bought for a decent price if you are hand engraving. You can even find deals on ebay for some non GRS brand engraving balls.
You should look for Shaun's handmade engraving machine instructional.
Really nice, thanks.
so nice!
Where can I get that tool and for how much?
The pusher machine name please
Gracias Por compartir
很漂亮，刻刀也与众不同
Amazing
anyone know where I can get an engraving system like this for around 100$? dont want to risk so much money as im just starting
Look up Shaun Hughes engraving he has videos showing how to make one from things you can buy on ebay for around 100 dollars. Even then though this is no cheap hobby.
Rate of push machine
From the thumbnail i really though you were tryingnto engrave hairy human skin lol
It would be helpful if he showed us his machine.
he did great if you agree like
Go to engraver.com
haha