Watched these videos yesterday in preparation for fitting the staircase today in my DIY loft conversion, can't tell you how helpful it was, thanks so much Del. Used every tip and trick you gave and the install went perfectly, you're a legend.
That's great Andrew👍as I said in the video, just start at top and keep everything plumb and level, and when it comes to fitting the winders, just make sure you don't box yourself in as they come down👊Part 2 will be out next week showing how I fit the winders🤘Thanks for watching😎Cheers Del
Great techniques and well explained. I doubt I'll ever fit a staircase but there's always something to be learned. Love the use of the circular saw and old school bevel edge chisel near the beginning. That's definitely something I'll use👍
Absolutely brilliant video. Really enjoy watching you're stuff. Im a chippy too but don't fit many staircases anymore so nice to refresh my brain Thanks for the effort put into making your stuff del 👍
Hi Ross🖐Stairs is one of those tasks that you either do a lot of, or very few of🤔Personally, I think, as long as you're logical, they are fairly straightforward👊Appreciate you watching as a fellow carpenter🤩and thanks for your comment 😎 Cheers Del
Nice work Del. Small tricks like not pairing of the dowels to pointed is where experience counts. 👌. I think alot of carpenter's are versatile from roofing to being very tasty at finish work. For me carpenter's make the best overall builder. They understand stand square,Parallel, level, marking out, forward thinking. Rant over 🤣. Looking forward to the next video on the stairs. Better than any Netflix documentary 🤣🇮🇪👍
Hi Paul🖐I'm a very technical and logical thinker🤔and I'm always trying to improve in any way I can each time I undertake a task by really taking notice of what I'm doing and constantly tweeking my approach👊 Always appreciate your comment bud, and thanks for watching 😎 Cheers
Very lucky to have been able to get away with the family this year Steve🤩This set of stairs was a nice little job to ease back into😎Thanks for watching bud🤩Cheers
Throughly enjoyed that Del. I’m in hospital having a routine op and found going down the staircase memory lane very entertaining. I will get the popcorn out for episode 2. Thanks again
I hope its nothing too serious Jerry🤞and I hope that the healing power of watching carpentry helps you in a speedy recovery🤗Thanks for watching😎Cheers Del
@@thetallcarpenter Ha, it certainly does Dell. I’m afraid it’s the dreaded kidney stones, as I have an autoimmune condition my bladder is inflamed. I hope your not having your dinner. Some eye watering moments 🫣🫣
@@jerrymoffat3966 Well Jerry, it appears you and me are both in the same club when it comes to experiencing the phenomenal pain of kidney stones, and I can only imagine how much worse it must be dealing with an inflamed kidney as well😩Take it easy bud
Nice on Del, looking good. I find the best way to combat FDB syndrome is to combine it with an NPD (New Pencil Day), it just gives you that little extra pep in your step to help you get through it ;-)
You're too kind Mark🤗These stairs are manufactured to a high standard, and so its pretty easy to make a great job of fitting them👊Thanks for watching bud😎Cheers Del
Love it Del👍🏻 started working for a stair guy years ago, I was excited about it as it’s not something you do much of, unless your doing it if you follow😂 guys he had were guns at stairs at least, and boss was up there, very knowledgeable both sides of the fence ( manufacturing and installation) ‘Oz stair’ as luck would have it he lost his major contract with a very large ( national builder) which was his bread and butter work, to nice to F me off as he’s just started me and been out with his boys a bit, a lot of hanging around workshop… ‘kitting out my van’ the very odd stair install for me, and I had to say to him ‘wtf is going on just level with me’. Then I went back to kitchens I think 🙄 Squeaks was my main worry going into it as , you know what a ‘repair’ that would be 🙄 I was always going to use the PU glue that expands, bad idea? ( if it was a good idea you’d be doing it I’m thinking 😂) Anyways I usually chicken out the odd stair job that comes my way, as I’d get there but it would be like death back heat! SLOW. I’d Make zero cash 😂
Hi OSC🖐Sounds like you got the run around there mate😩I would us PU glue if I was attempting to 'repair' a squeaky tread, but I think you'd get in a right mess using it on stairs like these😬(I jokingly mention this in the next part of the video) Thanks for your comment bud😎Cheers Del
@@thetallcarpenter nah I just think it was my usual luck mate, extremely bad 😂 seen them make some lovely stairs in their factory, on spiral where they build a stud frame mock up, a lot of ‘fudging’ or putting Timbers in place then using a router ie. for handrail, I’d have been crapping my pants for fear of F ups, but they cracked on. That might be the normal way, I wouldn’t know, maybe 5-6 straight flights in my life!
Hi Del. Good video again. I noticed you use your 660 all the time now too. I much prefer it to the 680 and you get used to the blade right set up quickly. Stops you getting showered in dust all the time👍🏻
Hi Luke🖐The 660 is the saw I'm most comfortable with for the majority of the cutting I do, BUT I definitely prefer the 680 for some other cutting tasks💪Thanks for watching 😎 Cheers Del
MDF stairs? If someone spills a drink these will swell up and disintegrate. I don't care how many specifications they whip up, I'd be extremely hesitant to make anything constructive out of glued up sawdust.
@@thetallcarpenter Cheers! Basic MDF just does not stand up to any level of moisture...not a great constructive material imo. Not trying to diss anyone's skills here - I mean that would be pointless ;)
Hi Kevin🖐Absolutely spot on bud, as the bevelled edge of the dowel faces away from the shoulder and 'wedges' the tenon further into the mortice pushing the newel back onto the shoulder👊Thanks for your comment 😎 Cheers
I’ve never fitted a staircase before did someone teach you the basics/ read a book? Is it better to just learn as you go and by doing it and over time get better?
Het bud🖐I was shown the very basics as an apprentice, but never really grasped it until I started fitting them on my own👊Once you understand a few basic principals, its pretty straightforward😎Thanks for your comment👍Cheers Del
@@chippy977 Hi there🖐The basic parts of notching the newels and fixing the top riser/tread are fairly well established methods and we're shown to me in my early training👊The rest of it really is just thinking logically and sticking to basic fundamentals like keeping things level, square and plumb. After years of doing it myself I have definitely fine tuned the way I do things to the point where I have supreme confidence when installing them👍and ironically, stairs were the thing I was most scared of when finished my training and went out on my own😵Cheers Del
@@thetallcarpenter hi there 👍🏻 have you got any advice for someone who wants to go out on their own but I feel as if I don’t know enough and kind of scares me messing a job up. I’ve obviously done my qualifications and have had years experience but it’s just taking the leap cheers
That's right Richard👊you've actually fitted something that you can start using and makes getting to the next floor much easier🤩Thanks for watching 😎 Cheers Del
Watched these videos yesterday in preparation for fitting the staircase today in my DIY loft conversion, can't tell you how helpful it was, thanks so much Del. Used every tip and trick you gave and the install went perfectly, you're a legend.
That's awesome Ryan😀and I'm really pleased my videos helped👍Cheers Del
Great video Del,
Love the little tip about putting a pellet where the dowels go. Thank you
Hi Mark🖐Its a great way to hide the dowel bud👊Thanks for watching😎
Can't tell you how grateful I am for this. I have two full kite winders to fit. Never done a staircase before 😱
That's great Andrew👍as I said in the video, just start at top and keep everything plumb and level, and when it comes to fitting the winders, just make sure you don't box yourself in as they come down👊Part 2 will be out next week showing how I fit the winders🤘Thanks for watching😎Cheers Del
You cease to amaze me Del, I really love watching you work mate as I’m always learning from you thanks mate Roll on part 2 👍😊🪚
You say the nicest things Carl🤗Part 2 will be next week bud👍Thanks for watching 😎
You always seem to give us helpful tips when I watch your videos. Great work as always
Thanks Kevin👊It's cool that I can share the ways I do things, as that's tge way we all learn more👍Cheers Del
Great techniques and well explained. I doubt I'll ever fit a staircase but there's always something to be learned. Love the use of the circular saw and old school bevel edge chisel near the beginning. That's definitely something I'll use👍
Cheers Ian👍Appreciate your comment and thanks for watching 😎
Absolutely brilliant video. Really enjoy watching you're stuff. Im a chippy too but don't fit many staircases anymore so nice to refresh my brain
Thanks for the effort put into making your stuff del 👍
Hi Ross🖐Stairs is one of those tasks that you either do a lot of, or very few of🤔Personally, I think, as long as you're logical, they are fairly straightforward👊Appreciate you watching as a fellow carpenter🤩and thanks for your comment 😎 Cheers Del
Nice work Del. Small tricks like not pairing of the dowels to pointed is where experience counts. 👌. I think alot of carpenter's are versatile from roofing to being very tasty at finish work. For me carpenter's make the best overall builder. They understand stand square,Parallel, level, marking out, forward thinking. Rant over 🤣. Looking forward to the next video on the stairs. Better than any Netflix documentary 🤣🇮🇪👍
Hi Paul🖐I'm a very technical and logical thinker🤔and I'm always trying to improve in any way I can each time I undertake a task by really taking notice of what I'm doing and constantly tweeking my approach👊 Always appreciate your comment bud, and thanks for watching 😎 Cheers
Brilliant job Del. Great to see you managed to get away for a break and nice to come back to stairs (cos I know you have said you like stairs)
Very lucky to have been able to get away with the family this year Steve🤩This set of stairs was a nice little job to ease back into😎Thanks for watching bud🤩Cheers
Really enjoyed watching always praying for your good health to keep going
Thanks you soo much for this lovely comment Mohammed🤗Wishing you good fortune too bud👍
Nice one Del, top notch stuff as always.👍🙂
I absolutely love fitting stairs Bradley, so its never a chore for me🤩Thanks for watching😎Cheers Del
Throughly enjoyed that Del. I’m in hospital having a routine op and found going down the staircase memory lane very entertaining. I will get the popcorn out for episode 2. Thanks again
I hope its nothing too serious Jerry🤞and I hope that the healing power of watching carpentry helps you in a speedy recovery🤗Thanks for watching😎Cheers Del
@@thetallcarpenter Ha, it certainly does Dell. I’m afraid it’s the dreaded kidney stones, as I have an autoimmune condition my bladder is inflamed. I hope your not having your dinner. Some eye watering moments 🫣🫣
@@jerrymoffat3966 Well Jerry, it appears you and me are both in the same club when it comes to experiencing the phenomenal pain of kidney stones, and I can only imagine how much worse it must be dealing with an inflamed kidney as well😩Take it easy bud
@@thetallcarpenter blimey Del, I hadn’t felt pain like it. I wouldn’t want to give birth. I better not go there. 🤔
@@jerrymoffat3966 Its pain with a capitol 'F' that's for sure😵
Nice one del..some nice little tips in there..looking forward to the next installment.
Next part will be out before you know it Arthur😁Thanks for watching😎Cheers
Fantastic video Del !!!!!! Youre a plesure to watch.........Thank you
That's very kind of you to say Michael🤗Thank you
You're the man Del boy👍
You're like a kid in a sweet shop with that staircase 😂👍Love it.
That's what I felt like JRS🤩Its been so long since I did a set, and I really like fitting them👊Thanks for watching bud😎Cheers
Nice on Del, looking good. I find the best way to combat FDB syndrome is to combine it with an NPD (New Pencil Day), it just gives you that little extra pep in your step to help you get through it ;-)
I didnt think there was a treatment for FDB Jim, but I think a dose of NPD would definitely ease the worst of the symptoms😁Great comment😆
Nice job I love fitting stairs 👍👌
Its not everyone's cup of tea John😬and I'm glad we both enjoy them👊Thanks for watching😎Cheers Del
Perfect perfect perfect thats all i can say Dell man after my own heart
You're too kind Mark🤗These stairs are manufactured to a high standard, and so its pretty easy to make a great job of fitting them👊Thanks for watching bud😎Cheers Del
Love it Del👍🏻 started working for a stair guy years ago, I was excited about it as it’s not something you do much of, unless your doing it if you follow😂 guys he had were guns at stairs at least, and boss was up there, very knowledgeable both sides of the fence ( manufacturing and installation)
‘Oz stair’ as luck would have it he lost his major contract with a very large ( national builder) which was his bread and butter work, to nice to F me off as he’s just started me and been out with his boys a bit, a lot of hanging around workshop… ‘kitting out my van’ the very odd stair install for me, and I had to say to him ‘wtf is going on just level with me’. Then I went back to kitchens I think 🙄
Squeaks was my main worry going into it as , you know what a ‘repair’ that would be 🙄
I was always going to use the PU glue that expands, bad idea? ( if it was a good idea you’d be doing it I’m thinking 😂)
Anyways I usually chicken out the odd stair job that comes my way, as I’d get there but it would be like death back heat! SLOW. I’d
Make zero cash 😂
Hi OSC🖐Sounds like you got the run around there mate😩I would us PU glue if I was attempting to 'repair' a squeaky tread, but I think you'd get in a right mess using it on stairs like these😬(I jokingly mention this in the next part of the video) Thanks for your comment bud😎Cheers Del
@@thetallcarpenter nah I just think it was my usual luck mate, extremely bad 😂 seen them make some lovely stairs in their factory, on spiral where they build a stud frame mock up, a lot of ‘fudging’ or putting Timbers in place then using a router ie. for handrail, I’d have been crapping my pants for fear of F ups, but they cracked on.
That might be the normal way, I wouldn’t know, maybe 5-6 straight flights in my life!
Hi Del. Good video again. I noticed you use your 660 all the time now too. I much prefer it to the 680 and you get used to the blade right set up quickly. Stops you getting showered in dust all the time👍🏻
Hi Luke🖐The 660 is the saw I'm most comfortable with for the majority of the cutting I do, BUT I definitely prefer the 680 for some other cutting tasks💪Thanks for watching 😎 Cheers Del
@@thetallcarpenter It's nice to have a choice Del👍🏻
Excellent job mate. I thought you were really ill 😂
Nearly got ya Tyler😜Thanks for watching bud😎
great video del
Appreciate you watching Neil🤗Cheers Del
Wish you'd fitted my staircase - Ive got so many squeeks thought I'd got a resident mouse!
That's not good Keith😬I see it a lot in site houses, and its easily avoided with a bit of extra care when installing🤔Thanks for watching😎Cheers Del
thanks for the video, i need this one
My pleasure Ladi👊Thanks for watching 😎 Cheers Del
😎
🫡😎
Great stuff, looking forward to the next one. What company supplied the staircase? 👍
Hi SV🖐 They are called David Smiths Ltd in Cambridgeshire👍 Cheers Del
MDF stairs? If someone spills a drink these will swell up and disintegrate. I don't care how many specifications they whip up, I'd be extremely hesitant to make anything constructive out of glued up sawdust.
Hi there🖐I'm not aware of any serious issues in relation to spillages on mdf treads, but I know some people don't like it😬Cheers Del
@@thetallcarpenter Cheers! Basic MDF just does not stand up to any level of moisture...not a great constructive material imo. Not trying to diss anyone's skills here - I mean that would be pointless ;)
@@disklamer 👍😎
Hi Del, Good looking job you've done there mate, when you drove your dowels did you put the unbevelled edge nearer the shoulder? 😎😎
Hi Kevin🖐Absolutely spot on bud, as the bevelled edge of the dowel faces away from the shoulder and 'wedges' the tenon further into the mortice pushing the newel back onto the shoulder👊Thanks for your comment 😎 Cheers
@@thetallcarpenter Thanks Del you learn a new trick every day. Look forward to part 2😎👍👍
👍👍👍
Cheers Pete😎
We all hate these glue bottle tops, yet they all tend to make them :) 2
I know B To B😵 I try to love them, but it only lasts for the first pour, then I hate them🤬🤪Thanks for your comment😎Cheers Del
👍
Cheers Paddy🤩
🤘😎🤘
Cheers Wayne 😎 Thanks for watching bud 👍
Is the stair manufacturer a local company to you or did you order them online?
Hi Matt🖐They are fairly local to me, but I know from working for them, that they cover much of the south east👍Cheers Del
Rather good stairs,looks great quailty & attention to detail.
@@stuartandrews4344 All the stairs on my Instagram were made the same company Stuart👍
I’ve never fitted a staircase before did someone teach you the basics/ read a book? Is it better to just learn as you go and by doing it and over time get better?
Het bud🖐I was shown the very basics as an apprentice, but never really grasped it until I started fitting them on my own👊Once you understand a few basic principals, its pretty straightforward😎Thanks for your comment👍Cheers Del
@@thetallcarpenter are the techniques you use original I.e you made them up or did someone show you them ?
@@chippy977 Hi there🖐The basic parts of notching the newels and fixing the top riser/tread are fairly well established methods and we're shown to me in my early training👊The rest of it really is just thinking logically and sticking to basic fundamentals like keeping things level, square and plumb. After years of doing it myself I have definitely fine tuned the way I do things to the point where I have supreme confidence when installing them👍and ironically, stairs were the thing I was most scared of when finished my training and went out on my own😵Cheers Del
@@thetallcarpenter hi there 👍🏻 have you got any advice for someone who wants to go out on their own but I feel as if I don’t know enough and kind of scares me messing a job up. I’ve obviously done my qualifications and have had years experience but it’s just taking the leap cheers
@@chippy977 I you want to have a chat, send me a message via Instagram at thetallcarpenteruk 👍
🏴👍
Thanks for watching Peter🤩Cheers Del
Why didn’t you plant a piece on the trimmer you wouldn’t have had to to do that in the seventies 😂😂
There's a lot of things that wouldn't have been done in the 70's Stephen😲🤣 Thanks for watching 😎 Cheers Del
are you self employed or do you work for a firm
Hi Sam🖐I've been self employed for a little over 30 years now, and have always found my own work👍Cheers Del
p
👍
Great work Del . We are suffering from CWTG …..
Can’t wait to go 😆🧱👍🏽
That's not nice Steve, and do get that sometimes, but usually after 4.30pm🤣Cheers Del
@@thetallcarpenter 🤨🤣🤣🧱👍🏽
Cracking Part 1 Del.. I enjoy the stair jobs myself. Always feel you’ve accomplished something when they’re in..👌🏻😀🪚
That's right Richard👊you've actually fitted something that you can start using and makes getting to the next floor much easier🤩Thanks for watching 😎 Cheers Del
@@thetallcarpenter 😂👍🏻👍🏻
CBBs are much worse than FDBs. It stands for Can’t Be Bothered…🫤
I thought its was 'CBA' Gordon🤔😆