Pretty straight forward install. Looks like a top notch kit. Can't wait for the follow up video. I would do all the mechanical stuff one day and do the lines and wire the next. I think in a single day I might be a bit tired after all the suspension stuff and not be fresh and patient for the lines and wire and probably mess stuff up or be sloppy. We are not all pros like you....LOL...LOL
The best ever air suspension installation i’ve seen in youtube. Very much detailed and specific. Keep it up AirLift! Hope you can make another detailed video using a Honda Accord Gen 8.
Bill how did you install the rear spring perch plate? I tried sticking in a flathead screwdriver to hold it in place, but I run out of clearance after a certain point and can't torque it down all the way.
this is by far the best and most useful descriptive video on an airlift installation. thank you for this! i did have a noob question. my shop which is quite far away installed my 3H system. Recently my manifold air pressure sensor went bad and airlift just sent me a new manifold. i'm going to attempt replacement of the manifold myself. i saw how you plug in the air hoses and how they lock in. as for the harness plugging in, that looks pretty straight forward too. obviously i should drain the tank before i start this install. but my question is, do i need to disconnect the red and black terminals of the battery first before removing my old manifold and plugging the new one in, or is it safe to leave the battery connected and just swapping it out? i ask because last time disconnection of the battery erupted some issues while installing a subwoofer and amp. i have an audi s5
Been thinking about bagging my mustang. Problem is I have a 2020 PP2 with the magneride suspension. From what I’ve seen it looks like you can’t or at least shouldn’t install air ride on a mustang with magneride. Anyone has any thoughts on that?
Are you worried about air fill to front versus rear with the front air lines significantly longer than your rear air lines. I would assume you'd want all air lines approximately the same length and simply roll up and zip tie access rear line and hide in the wheel well to get all 4 wheels to lower and raise at the same level evenly?
Not sure why the rear airing out (or filling) faster than the front is an issue other than aesthetics? That said, if it's important there are other ways to do it without running a bunch of unnecessary line. One being an air flow control valve.
I have a question: what do I have to buy from your site to get the aggressive Fitment of (10x5 front and 10x5 rear) on my 2016 S550??? I see a lot of people have Air-lift suspension do I need that first?? Please help
Hey Bill I have a question when you remove the back spring did you remove the bottom rubber piece or reuse it I haven't seen nobody mentioned it yet no even the installation instructions
My controller keeps on turning off after a couple of seconds after powered on or doesn’t even power on sometimes. I never screwed down the relay could that be the issue?
Bill I have 2014 CAMARO zl1 AND WANT TO INCREASE THE RIDE HEIGHT, ROAD CLEARANCE BY 2 TO 3 INCHES...CAN YOU PROVIDE ME WITH SUGGESTIONS AS TO THE BEST WAY TO ACCOMPLISH THIS
hey Bill, I've been watching your vids for over a year. just out of curiosity, I'm wondering which is better. A coiled over system or a bagged system. I'm not going to show my car, or go to the track. I'm just wanting a more comfortable ride with an improvement on handling. Which would you recommend?
Honestly shocks, struts, and new springs would probably be all you need. Both coilovers and air have a lot of adjustment you can dial in for your use, if you are just looking for a better ride both might be overkill.
Alright got a problem after a couple of months something was rattling and sounded loose i am just checking and its the lower centering spacers from the bag tried to tighten and just was spinning freely so i removed it and it came out with the gold thread that holds it in place... anything i can do?
As awesome as these videos are, they're not as informative as i would have hoped. For example where did you mount the compressor?? You show us the tank and manifold but completely neglect the compressor.
can you install this on a car with magnaride? have a kit for my 2015 but getting a 2021 built which will have magnaride. Will this trip sensors and cause errors? I know I can get magnaride lowering springs but looking to be able raise and lower for my driveway access.
For those of you having trouble with the rear nut plate. Attach it to the bag instead of putting in the hole and you can wiggle it in then tighten.
Did you put bump stop when installing the rear shock?
GREAT quality video! No bs, no blathering...straight to the content that we clicked for.
Can we have that second part of the video where you drive it?
Can I have a request. Can you make a video how to install the wiring harness. thank you
@@gashforaruby lolol
Pretty straight forward install. Looks like a top notch kit. Can't wait for the follow up video. I would do all the mechanical stuff one day and do the lines and wire the next. I think in a single day I might be a bit tired after all the suspension stuff and not be fresh and patient for the lines and wire and probably mess stuff up or be sloppy. We are not all pros like you....LOL...LOL
The best ever air suspension installation i’ve seen in youtube. Very much detailed and specific.
Keep it up AirLift!
Hope you can make another detailed video using a Honda Accord Gen 8.
Jerry Barroga oh just fuck CJ then huh ?
I’d say thanks to bill for doing the video man
Very nice video. I wasn't afraid of the install, but this video helps a lot and gives me the confidence to get it done at home.
One thing i miss about owning a mustang are these awesome detailed installation videos you put out
Great job bill ! You ever have a moment of oops doing a video ? Or better yet a bloopers video ?
Nice watch Bill, got to have it 👍
Nice content!!!!!❤
Top 2 i pick towards lowered cars w "some" permormance?
B2 Racing COILOVERS w air cup to raise car w a flick of switch for bunps
or
Air Lift Perfornce
Bill could you make a video showing where and what size of alternate air tank to use and locate in spare tire well
Subframe bolts can they be re used? I read in someone videos you need too is this true
Bill how did you install the rear spring perch plate? I tried sticking in a flathead screwdriver to hold it in place, but I run out of clearance after a certain point and can't torque it down all the way.
Patrick Miravalle what did you end up doing? Im stuck on that right now
@@steve_shec whatd you do? only reason why i havent order bags yet is because i do not understand one bit of that part of the install. very vague.
I’m stuck on this right now too
Recommendation for the focus rs? The stiff ride is a killer. Would like more damping adjustment and a smoother ride. Daily only no track use.
Love watching this guy work. Awesome personality and presentation skills shine right through each video. ~}[]{
Thank you!
Thanks for the video helped me install my system
wow... it looks amazing...... nicely done
this is by far the best and most useful descriptive video on an airlift installation. thank you for this! i did have a noob question. my shop which is quite far away installed my 3H system. Recently my manifold air pressure sensor went bad and airlift just sent me a new manifold. i'm going to attempt replacement of the manifold myself. i saw how you plug in the air hoses and how they lock in. as for the harness plugging in, that looks pretty straight forward too. obviously i should drain the tank before i start this install. but my question is, do i need to disconnect the red and black terminals of the battery first before removing my old manifold and plugging the new one in, or is it safe to leave the battery connected and just swapping it out? i ask because last time disconnection of the battery erupted some issues while installing a subwoofer and amp. i have an audi s5
What’s the widest size of tire I can go for a 2018 mustang in order for me to air out perfectly fine ?
Been thinking about bagging my mustang. Problem is I have a 2020 PP2 with the magneride suspension. From what I’ve seen it looks like you can’t or at least shouldn’t install air ride on a mustang with magneride. Anyone has any thoughts on that?
what size tires should i go with ,running stock 19 black mustang wheels
How would you loosen the rear bag and take out if there was a problem considering that the nut plate is on the inside.
How did you hold the plate when installing the rear? I’ve been trying for 3 hours now and it’s stressing me out :’(
I have a 2020 Mustang GT PP1, can I buy this complete kit? And does it include everything I need to get it installed professionally?
How do u even hold the nut plate in place.
Are you worried about air fill to front versus rear with the front air lines significantly longer than your rear air lines. I would assume you'd want all air lines approximately the same length and simply roll up and zip tie access rear line and hide in the wheel well to get all 4 wheels to lower and raise at the same level evenly?
Not sure why the rear airing out (or filling) faster than the front is an issue other than aesthetics? That said, if it's important there are other ways to do it without running a bunch of unnecessary line. One being an air flow control valve.
You could weld the plate in the rear so it does not spin
I have a question: what do I have to buy from your site to get the aggressive Fitment of (10x5 front and 10x5 rear) on my 2016 S550??? I see a lot of people have Air-lift suspension do I need that first?? Please help
Hey Bill I have a question when you remove the back spring did you remove the bottom rubber piece or reuse it I haven't seen nobody mentioned it yet no even the installation instructions
Remove both rubber pieces not used anymore
You said it will kill your battery. Can you start the car then calibrate?
I was thinking of making my old mustang a mud toy can you help me out? Is there any aftermarket parts for that
Heyy which line was installed on this? Was it the 1/4 or 3/8?
Can you make one for 2017 Honda Civic si.!!!! Please
I’m about to install a 3P on my 2013 Honda Civic. Wish me luck
Anyone know where I can find a kit for my older Sienna 2009?
My controller keeps on turning off after a couple of seconds after powered on or doesn’t even power on sometimes. I never screwed down the relay could that be the issue?
8:39 nice watch
Do a 99-04 Mustang GT header install 4.6 engine
Bill I have 2014 CAMARO zl1 AND WANT TO INCREASE THE RIDE HEIGHT, ROAD CLEARANCE BY 2 TO 3 INCHES...CAN YOU PROVIDE ME WITH SUGGESTIONS AS TO THE BEST WAY TO ACCOMPLISH THIS
Sorry I really don't have any experience with those cars.
Billy Bobb buy a truck lol
Link for that cordless impact wrench?
Noob question: wouldn't tire wear be a big issue with constantly changing ride height typically used with air suspension?
You would get the car aligned at your normal driving height so it really isn't an issue.
Hey CJ what’s the dimensions of that board for the Air tank?
Is all this sold separately?
How much clearance get added to the car
hey Bill, I've been watching your vids for over a year. just out of curiosity, I'm wondering which is better. A coiled over system or a bagged system. I'm not going to show my car, or go to the track. I'm just wanting a more comfortable ride with an improvement on handling. Which would you recommend?
Honestly shocks, struts, and new springs would probably be all you need. Both coilovers and air have a lot of adjustment you can dial in for your use, if you are just looking for a better ride both might be overkill.
Alright got a problem after a couple of months something was rattling and sounded loose i am just checking and its the lower centering spacers from the bag tried to tighten and just was spinning freely so i removed it and it came out with the gold thread that holds it in place... anything i can do?
Give airlifts support line a call they can probably help you out (800) 248-0892
I was never given any hardware. Can you guys let me know the size of the bolt for the air tanks?
where did u buy it?
17:33
Deez nuts
What brand electric impact gun is that it's pretty powerful...
Dewalt
Just headed over to watch the "05 to '14 install......
Where is the second video???
And a well stocked tool box lol also why them running lights on? 😂
Please tell me what wheels these are. This is my color and I want to buy those wheels right now!!!!!!!please help
I know they are made by Stance but we don't sell them so that is all I know. - Bill
Those shocks are 4 v6 and v8
Where is the driving review?
17:29 17:33
What's the highest it will go
Pratham Nanda I think they said 1/2 inch above stock
As awesome as these videos are, they're not as informative as i would have hoped. For example where did you mount the compressor?? You show us the tank and manifold but completely neglect the compressor.
I try and show as much of the details as I can, we focus more on how everything works since mounting location is subjective.
I 2^x the request for the second part. I am looking for something to tame a non-magna pony.
🤩🤩🤩🤩
Yeah lets drop 100k into a MUSTANG
100k? lolz
Never heard hard parker lol, only heard slammed and ricer
Added weight.. nope
can you install this on a car with magnaride? have a kit for my 2015 but getting a 2021 built which will have magnaride. Will this trip sensors and cause errors? I know I can get magnaride lowering springs but looking to be able raise and lower for my driveway access.