I love how, if you have subs on and watch the section of cutting, it states that there's "Music" and "applause." So not only did you compose a masterpiece, you got a standing ovation. Good job you.
I only had to do this once, but I learned the hard way that it takes a TON of elbow grease, most of an afternoon, and a sharp knife and occasional hammer to cut one by hand. Now I have 47 simi truck tires that have to be cross cut in half... at 72 I may not live long enough! . Looking for a better way. But really enjoyed your video and the "sexy" elbow shot! LOL
I use a dual saw. It's great, but you definitely need to concentrate & have full situational awareness when using it. You can dismember, gut, or otherwise maim yourself and/or someone else, if you're not careful! I used one to cut old steel & iron pipes out of a house to make room for copper water pipes & PVC sewer pipes, & it cut through the old steel & iron in a jiffy. I now use one to cut old tires into chunks to use as TDR, Tire Derived Fuel, mixed in with the coal in my furnace. It's much quicker than using a grinder.
I use the dual saw too. It's great, but you definitely need to concentrate & have full situational awareness when using it. You can dismember, gut, or otherwise maim yourself and/or someone else, if you're not careful! I used one to cut old steel & iron pipes out of a house to make room for copper water pipes & PVC sewer pipes, & it cut through the steel & iron in a jiffy. I now use one to cut old tires into chunks to use as TDR, Tire Derived Fuel, mixed in with the coal in my furnace. It's much quicker than using a grinder.
i been using tires around mailbox and a couple small trees to keep yard guy off them. i want them cut in half like yours. would a sawzall with demolition blade work? i have that.
A sawzall with the teeth filed off the blade will cut ten times faster than the kitchen carving knife . And where do you find antique bias ply tires with no steel belts LOL
If you want to cut a tire for disposal use a utility knife to cut the walls off first. The remaining is easy to cut. Best advice is to start with a grinder and cut the part where the wall was cut towards the thread. Always wear safety glasses, gloves and an apron to protect from the rubber psalter, if it’s too hot it will stick to anything. If you want to save your grinder wheel, after you get to the thread use a reciprocating saw with a strong blade that cuts through metal. Diablo makes the best do not use a wood saw that can cut through nails, use a saw that can cut through metal. If you have any specific questions feel free to ask.
I do! I have several I just want to cut in half but not the way he did. I want two u’s left to shape into borders for projects. What’s best? Especially on a very limited budget.
Going to make something over on the NelsonStudios channel and the electric knife idea was such a total failure it became clear this was a bluesmoke kind of job. All will be reviled when I can figure out the details.
LMFAO "the tire cutter in halfer apparatuser" This guy's eccentric I love it! LOL
I love how, if you have subs on and watch the section of cutting, it states that there's "Music" and "applause." So not only did you compose a masterpiece, you got a standing ovation. Good job you.
Oh that was great! You had me laughing at several points. Can't wait to see why you needed a tire cut in two.
Are you with the NSA?
LOL no, we get this all the time we are NASA.
th-cam.com/video/uyg12BpFhiU/w-d-xo.html
Oh this is great!!! Loving it!!! ❤️❤️❤️😍
U HAD ME ROLLIN'.. TOO DANG FUNNY! IRONY OF IT ALL. WELL DONE.. FINALLY! MARGO- KANSAS CITRY
I only had to do this once, but I learned the hard way that it takes a TON of elbow grease, most of an afternoon, and a sharp knife and occasional hammer to cut one by hand. Now I have 47 simi truck tires that have to be cross cut in half... at 72 I may not live long enough! . Looking for a better way. But really enjoyed your video and the "sexy" elbow shot! LOL
I use a dual saw. It's great, but you definitely need to concentrate & have full situational awareness when using it. You can dismember, gut, or otherwise maim yourself and/or someone else, if you're not careful!
I used one to cut old steel & iron pipes out of a house to make room for copper water pipes & PVC sewer pipes, & it cut through the old steel & iron in a jiffy. I now use one to cut old tires into chunks to use as TDR, Tire Derived Fuel, mixed in with the coal in my furnace. It's much quicker than using a grinder.
Shared you on Facebook. I had a good laugh and want my friends to enjoy one too.
I use the dual saw too. It's great, but you definitely need to concentrate & have full situational awareness when using it. You can dismember, gut, or otherwise maim yourself and/or someone else, if you're not careful! I used one to cut old steel & iron pipes out of a house to make room for copper water pipes & PVC sewer pipes, & it cut through the steel & iron in a jiffy.
I now use one to cut old tires into chunks to use as TDR, Tire Derived Fuel, mixed in with the coal in my furnace. It's much quicker than using a grinder.
This video has me BUSTIN’ up!!! 🤣🤣🤣👏🏽
i been using tires around mailbox and a couple small trees to keep yard guy off them. i want them cut in half like yours. would a sawzall with demolition blade work? i have that.
I was expecting some magic smoke before the trigger went!
You also proved that plenty of lubrication is essential for easy insertion!
That's what she said.
bluesmokeproductions my son-in-laws FAVORITE response to pretty much everything 😂 “ ‘edIT’ “ so... “that’s what “he” said... 👀🤪
Thanks for all the chuckles! I don’t know why u needed it cut in half but I hope it was worth it 😂
So cutting a tire and a half makes it easier to put in a black plastic bag and to ship it via a large truck that has a compactor on the back
Here because they cut that deers antlers to get that tire off
A sawzall with the teeth filed off the blade will cut ten times faster than the kitchen carving knife . And where do you find antique bias ply tires with no steel belts LOL
You nearly wrecked the wife's best screwdriver by using it for cutting at the end.
I will have you know that knife was made of the finest Chinesium known to modern science.
I'm guessing no steel banding?
Hmmm... Are you ON something today, or OFF something today?
Why limit yourself to just those two choices?
@@bluesmokeproductions I subscribed JUST BECAUSE it's NONE of My Damn Business!! LMBO!
If you want to cut a tire for disposal use a utility knife to cut the walls off first. The remaining is easy to cut. Best advice is to start with a grinder and cut the part where the wall was cut towards the thread. Always wear safety glasses, gloves and an apron to protect from the rubber psalter, if it’s too hot it will stick to anything. If you want to save your grinder wheel, after you get to the thread use a reciprocating saw with a strong blade that cuts through metal. Diablo makes the best do not use a wood saw that can cut through nails, use a saw that can cut through metal. If you have any specific questions feel free to ask.
I do! I have several I just want to cut in half but not the way he did. I want two u’s left to shape into borders for projects. What’s best? Especially on a very limited budget.
will u finish off the carving knife in the blue some productions way
Oh yes. I just wish the second blade hadn't broken off at the end. I was going to see how it cut at 10x the normal RPM.
Wow
Hey Numb-Nuts, I guess using a drill to make a few starter holes to allow the knife to fit into never crossed your mind
Sure... because that is the real problem here.
Rediyl tyre katne wala koi masin hai
Should've stuck with the angle grinder.
Watch 5:00 - 7:00 without looking at the picture and he is reviewing a Russian ass vibrator from the 40s.
so why did you need to cut a tire in two?
Going to make something over on the NelsonStudios channel and the electric knife idea was such a total failure it became clear this was a bluesmoke kind of job. All will be reviled when I can figure out the details.
th-cam.com/video/uyg12BpFhiU/w-d-xo.html
where I can buy the knife?
Find them in old thrift stores.
Hum ye masin Lena chahte hai phon number dijiye
I thought the dual saw was doing good and faster.
I really really really really regret watching this video....i had high expectations....
Use a sawall wood blade it's cheap and work very well. Done move on to the next thing in life!!!!
Why wouldn't you just keep using the angle grinder haha you're funny though
How NOT to.
That's 10:35 minutes never to be seen or useful.
Just REGULAR steel with REGULAR carbide, psshhh. For peasants.
Thus guy is a RIOT ! LOVE IT !!!! ❤🎉😂😊
That doesn't look so easy for my hands.
Just explain how don't need you lip geez
Tungsten Carbide Blades?? Hmm
Whoa. The knife became self-aware.
Too funny!
You have good kung fu
There must be an easier way to put an inner tube in a tire?🤣🤣🤣🤣🤣🤣🤣🤣
th-cam.com/video/qNzl6N_ScyQ/w-d-xo.html min 1:22 ??
Sawzall.
If you used lube then yes. Lots of things are like that.
👍lol
first like first comment
See, that is why we love you the best of all our children.
Horrible
Too much talk
Umm. Waste of time.