Dude you’re awesome. I followed all your instructions step by step and did all the upgrades plus installed a Hayl-Rail from Strike and a vertical folding grip from LWRC. Yes I fucked up a few steps and had redo lol, you live n learn Brutha..Thx.
Has anyone had trouble removing the pin for the bolt release button? Mine seems really jammed in there even after a lot of good hits... cant seem to take it out.
Great Video! Things are changing under our noses, (and we arent being told). I would say: While at it, go for 922r COMPLIANCE. Buy these parts "Made in USA", When you go TO an adjustable stock, YOU MUST, have no more than 10 parts IMPORTED WITH the Weapon. So you need to make 3 parts NON-BENELLI!(Trigggers are for the VERY patient, But will count as 3 parts.) [The Follower #1] [The 7 round Mag Tube #2] The stock itself, can be found for little over $330. There is your compliance. I had MY channel "Suspended" for showing Benelli Lovers how to COMPLY. Not asking for "Clicks" and I don't sell anything. It's the world we live in now. Safe Shooting! 👍🏼🙏🏻💥
Not at all. In fact, having both the larger charging handle and slide release makes it even easier to operate the firearm. Plus it looks a bit spiffy not having tiny baby handles/buttons
Honestly, I'm not 100% sure. It might be Freedom Fighters Tactical, but I don't remember paying like $100 for it. But looking at the video, it could be a "ROTH Oversized Safety Button"
I know, I saw. I'm sorry. If you're okay waiting definitely recommended getting that. As I feel the full length looks better than the +2 extension. But that's a personal choice. Also, i know if you google it, other companies make their own version, maybe even better quality. Of course, it's your choice.
I find it difficult to push shells past the factory shell catch into the magazine. Does the GG&G kit with the new shell catch make loading the magazine easier?
I haven't tried that with the factory shell catch because I immediately changed it to the GG&G one, but I can tell you that I don't have any problems like the one you're describing.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
Excellent video! Very helpful. Much appreciated!
Dude you’re awesome. I followed all your instructions step by step and did all the upgrades plus installed a Hayl-Rail from Strike and a vertical folding grip from LWRC. Yes I fucked up a few steps and had redo lol, you live n learn Brutha..Thx.
How good Is the hayl rail ? I just purchased my benelli yesterday and I hate that stock look. I’m looking into the hayl rail, picatinni rail or m lok
Indeed! Once ya dona few Trigger/Hammer swaps, it gets REAL fun..🤘🏼⚡️🦈
Great vid man im interested to see if the new mag tube matches the original finish of the gun
cbowtie33 I just got this magazine tube from the same spot and the color is definitely different.
Has anyone had trouble removing the pin for the bolt release button? Mine seems really jammed in there even after a lot of good hits... cant seem to take it out.
Where and what is the model of the bolt release?
Great Video! Things are changing under our noses, (and we arent being told). I would say: While at it, go for 922r COMPLIANCE. Buy these parts "Made in USA", When you go TO an adjustable stock, YOU MUST, have no more than 10 parts IMPORTED WITH the Weapon. So you need to make 3 parts NON-BENELLI!(Trigggers are for the VERY patient, But will count as 3 parts.) [The Follower #1] [The 7 round Mag Tube #2] The stock itself, can be found for little over $330. There is your compliance. I had MY channel "Suspended" for showing Benelli Lovers how to COMPLY.
Not asking for "Clicks" and I don't sell anything. It's the world we live in now. Safe Shooting! 👍🏼🙏🏻💥
Does the larger charging handle interfere with the new mag release since it’s not sitting flush?
Not at all. In fact, having both the larger charging handle and slide release makes it even easier to operate the firearm. Plus it looks a bit spiffy not having tiny baby handles/buttons
In seriousness, it doesn't interfere at all. Not sitting flush enables it to be felt without looking with ease.
EKB thank you!
Great vid.👍.... thank you.
thank you
What brand of enlarged safety is that? Hard to find one with the red indicator ring I find
Honestly, I'm not 100% sure. It might be Freedom Fighters Tactical, but I don't remember paying like $100 for it. But looking at the video, it could be a "ROTH Oversized Safety Button"
So all you gatta do is have 10 or less Italian parts all I gatta do is switch up is 3-4 parts to hold 7 and have an adjustable stock ?? That 922 law
Where did you get the Benelli OEM magazine ?
www.benelliparts.net/store/p2/Benelli_M4_7_Round_Magazine_Tube_70052.html
EKB thanks, unfortunately they are sold out !
I know, I saw. I'm sorry. If you're okay waiting definitely recommended getting that. As I feel the full length looks better than the +2 extension. But that's a personal choice. Also, i know if you google it, other companies make their own version, maybe even better quality. Of course, it's your choice.
great!
compatible with the canuck operator?
Honestly, I'm not sure. You'd have to contact the business that makes that and ask them if benelli m4 parts can be used inside it.
I find it difficult to push shells past the factory shell catch into the magazine. Does the GG&G kit with the new shell catch make loading the magazine easier?
I haven't tried that with the factory shell catch because I immediately changed it to the GG&G one, but I can tell you that I don't have any problems like the one you're describing.
Thanks. I ended up sanding and polishing the shell stop, and now it is much improved.
It's a alot of testicular fortitude to push that tube in on the 5 shot tube with the 7 round factory spring that is in the 5 round tube lol
Where do you get those punches
Amazon: www.amazon.com/gp/aw/d/B01N1HXR7A?psc=1&ref=ppx_pop_mob_b_asin_image
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
922R compliant?
Of course.