ฝัง
- เผยแพร่เมื่อ 8 ม.ค. 2025
- #OpenWrt #USB #Recovery #Setup #Dynalink
USB Recovery Setup for OpenWrt Router
Step 0: Have a FAT32 formatted flash drive, and download the firmware file (.itb) for Dynalink Router onto the flash drive, you can get the file here: firmware-selec...
I strongly recommend renaming it to Recovery.itb, if you want to call it something else, change the name of the file in the third command you will execute
Step 1: SSH into your OpenWrt Router
Step 2: Execute the following commands:
fw_setenv bootcmd 'run openwrtusb; run openwrtboot'
fw_setenv openwrtboot 'setenv bootargs console=ttyMSM0,115200n8 ubi.mtd=rootfs rootfstype=squashfs rootwait; ubi part fs; ubi read 0x44000000 kernel; bootm 0x44000000#config@rt5010w-d350-rev0'
fw_setenv openwrtusb 'usb start && fatload usb 0:0 0x44000000 Recovery.itb && bootm 0x44000000'
Step 3: Your done, BUT TEST IT BEFORE ASSUMING IT WORKED
