ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- SUPPORT ROAM LYFE: roamlyfe.com
In this video we tackle the exciting project of fabricating a steel tray for Coal! firstly I measured out how long and wide i wanted the tray and then continued with the cutting list seen in the video! I highly recommend doing that as the steel shop was happy to supply cut and deliver the steel for only $550 and they left me with the offcuts witch has helped for the rest of the tray! I genuinely enjoyed this project and how the patrol is coming along! hope you guys enjoy the video and cheers for watching!
INSTAGRAM: Roam_Lyfe
We got a copyright strike on this video so the music has been replaced with TH-cam’s music! Hope it dosnt annoy you guys to much as it’s not perfectly cut in! Thanks guys!
Im building my tray this weekend so youve uploaded this at the perfect time. Cheers for video mate, got alot out of it
Good on ya mate! I’m a fabricator by trade you blokes have done a great job for non trade!
Wow! Thanks mate, means a lot coming from a fabricator! Your job is much more involved than it looks!
@@RoamLyfe thanks mate! I really enjoy my job!
Another minticle vid bro. Loving it! More amps in the mig mate. Keep the gas pressure up on the argon sweet welds guaranteed
Will do!! I haven’t completed hardly any of the welds so I’ll make sure it’s nice and strong!
Oh I’ve been waiting for this, watched all the other build episodes in about 24 hours
Wow that’s crazy! Thanks for watching legend!
im a boilermaker and i think for two guys who dont weld everyday u did ok the build is looking good, but next time dont weld the top section where u r placing ur plate as when u put ur plate down u can stitch weld it down but good effort
Hey mate! Thanks for your comment!! Also I’m
Going with an alloy floor! I wasn’t going to weld it but I figured it’s better than a crack where potentially sand and moisture can get into the box section! What would you suggest in that scenario!
@@RoamLyfe sikaflex any whole u see but make sure u can still paint over it and sikaflex the alloy sheet when placing the tray down . try and get the corners nice and square so the alloy fits nice and easy
Sunnies on his head, still closes eyes haha love it. Keep it up lads, you're my inspiration to make mine
Wow how backyard aussie.!! Welding in t-shirt/thongs, “just close my eyes”.! 😂😂
Didn’t see any smoking around an open jerrycan tho! 👍🍻
Love it! 👌👌👌 Patrols coming along great !
Thanks boys! Gonna have to come visit when it’s finished!
Awesome build man. Im about to start mine within the next month hopefully. Any reason for square tubing vs c channel? Im trying to decide for mine.
the amount of detail put into this is impressive! love ya vids bro
Thanks legend!!
This is a pretty good video! It shows all the little detailed things you are doing. As a boilermaker/sheet metal fabricator, all looks good but the welds haha. Sorry to say! Couple tips, always push the mig, don't drag it, and you guys need a fair bit more amps, leave the wire speed as it is. A fair few welds are very cold and some of them will not hold at all. But other than that, keep it up! You'll keep getting better with practice! Depending on where you guys are, I'm on the Sunshine Coast, maybe I can help set that welder right for yas!
Awesome! The main goal for the day was to just get it to hold together and put it on the Ute! Final welds will be done off the Ute again! And what I will do is go around and grind back all the crap welds and re do them! We are also on the Sunshine Coast, but I wouldn’t expect you to do that!! I can play around with it untill it’s nice and hot!!
What’s are the measurement of your tray mate think of doing one myself great video 👍🏻
This would be a pleasure to watch without all the noise some call music .. building is universal but music is a individual acquired taste ... It's a shame I really wanted to see your work without all the jazz
Hey maté awesome tray I’m doing one soon just wondering what size did you go for the tray mount rails are they 100 by 40
Push with mig and more amps for a hotter weld. Love ya work bro
is that 2mm or 3mm steel? im planning on doing mines, but im afraid 2mm is to weak and i think 3mm is going to be to heavy, what you recommend? putting it in a mazda bravo
Sabotaging your mates welds so you don’t have to shout lunch 😂
Realising those welds are holding your tray together 😳
Great vid keen to see how it looks finished🤙🏻
Hahahaha, I’m gonna have to mark his side so when it falls apart on the tracks I have someone to blame!
@@RoamLyfe better yet don’t mark anything and that way you can blame him for anything
The welder needs to be a bit hotter and vertical Downs aren’t strong but love the video boys keep it up
You’ll be proud cause this weekend I wh round every weld back and learnt how to do it properly and now they are 100x better!!
Boilermaker by trade and those welds are shit lol. But was a great end result and you had a go and did it to yourself. You also beat your mates effort 😃... Nice build you doing...
Hahaha yeah we definitely don’t claim to have the best welds 😂😂😂! We did turn the welder up and go over them tho so they will be strong as! I just believe the only way to get better is to have a crack! Cheers mate!
@@RoamLyfe exactly
How thick and wide is that rear metal piece that the taillights and number plate mount to?
Love the safety - closing the eyes is top notch 😂🤣
Brilliant skills boys!
Good day mate would it be possible if i actually ask for the list of your measurements! I couldnt see clear the measurements
I will chuck one up on my Instagram today or tomorrow for you! Shoot me a message!
@@RoamLyfe thank u appreciate it!
Hi man bought a couple of your stickers there sick how much in materials did that roughly cost you ?
It’s 550$ so far mate!! Cheers for the support!
Wow and get real. Very ugly Use current and slow the pass. I have been welding for over 25 years. Tack once. Weld once. Done right.
Thanks for the tip!
also you dont need to prep rhs, the coating on it is weld through primer =]
Got to run more amps, she's running cold, none the less great job, looks clean
More volts
Hey man do you remember what height you went to the middle of the fold ?
The outcome is mint! So glad you took your friend’s advice to redo a couple of those 😂. Anyway, I’m jealous.
How much did it cost all up im looking at making my own
The car behind it needs insurance cover
Any chance of getting that cut list?
Could do without the trash beats bro.
what gq patrol is it and what year
you blokes are having a go and building it yourself that's the main thing (safety thongs are questionable lol), i find it's a lot more fun when you do it yourself rather than paying someone to do it, and you always learn everytime you do one, can only get better from now on
YEEEEEEEE UP THE GQQQQQ!!!
Hey guys, how sure are you the box mounts 50x50x50 will be strong enough to stop the tray moving into the cab should you reverse into a bank or tree ??
seen better welds on a bed from amart
This is genuinely the best lookin GQ I’ve seen. Just everything is working together so well mate unreal effort
Thanks mate!!
The tray looks so mint mate, have done a beautiful job. I want to almost the exact same tray if I ever get another ute or chop my wagon. Keep it up man
Thanks William! I’m pretty stoked with it so far, definitely recommend having a crack yourself!
wayy to wide on the head board
hahaha you can weld over the blue paint because it was designed for welding in mind.
9:22 caterpillar 🤦🤣
you definetly won lol
doesnt steel rust tho
Where did u get the angle finder mate??
EBay mate
Bro! That's clean! Loving the episodes 🤙
Thanks legend!
good to see u cranked up the heat those welds were shocking
i know im abit late but strooth i seen it, glad they wacked some volts into her after
Second i think
Hey bro im making a tray aswell but i can't seem to get that angle on the headboard right to i just made it square instead of it being angled. Any ideas?
Go find someone’s canopy and buy a angle finder! Mine was copied from a canopy just incase I ever put a canopy on!
@@RoamLyfe okay thanks heaps bro
Hey mate awesome build. Just a quick question when you painted with raptor did you use a HVLP gravity gun or standard I love the finish and about to paint my tray.
I think you're both almost as bad as me.
Awesome😅😅
Love the channel and loving the build. But all the welding is horrendous 😂.
Gq's turning out sick 👌
Hahaha yeah me and the welder arnt the best of friends 😂😂 but in all fairness I’ve left most of the welding not done just so I can do back and actually take my time with it!
This thing is looking mint! Can't wait to see it rolling around the coast.
I’m so keen to get it on the road!
Nice job!
What is the thickness of the tubing?
I’d love to see a vid when you guys do the Dmax!
Done
Should of banged stitch welds in as well
Mate that looks tidy as! Can't wait to see it finished 👌
Thanks legend! I’m so keen to get it on the road!
@@RoamLyfe mate you should get a laser cut sheet for the headboard with your logo in it 🤙
What a weapon, I am pretty much at the same stage with my custom dmax tray, but mines still on axle stands in the shed. Watching this makes me keen as to see mine and yours finished. Top effort mate. 🤙
Nice build. welding in flip flops brave
Don’t drag MIG dude, always push if your running gas, but good work
Thanks for sharing! I actually didn’t know that! Cheers mate!
Deciding weather or not to make a tray on my nav, does it look as complicated as it looks or is it piss easy. Just basic math obviously some engineering
It’s pretty basic really, it’s basic math and just angles! As long as you know how to square things and all that I reckon you will be alright!
little bit of advise, you dont need to vertical up on that sort of gear mate, turn up that inverter and verty down. Also dont drag just push. Good fun mate good to watch, nothing better than doing builds with mates
That’s great thank you mate!! There’s heaps more welding to do so I’ll make sure I dial it in before giving it a crack
Please please pleaseeeeee change the front bar it would look so much nicer with a ARB front bar
Maybe one day!! I do like the arb but at the moment this will stay! I also really like stealth!
What thickness was the steel
Love it👌. Looking like a mint rig now! 🤤
Where did you get the bonnet protector?
Thanks mate! It’s from eBay too!
Mate what a cracking job use absolutely killed it. like you would say she’s mint 👌🏼can’t wait for the next episode 🤙🏻
Thanks Adam! Thanks for the comment!
Blue steel? 🤔😜😂😂
No penno Ryan turn up the welder a bit
thats a cool box
Why is everyone welding in flip flops in Australia haha
Aussie safety boots 😅😅
How do we get one of these
Make one!!
@@RoamLyfe no wonder why it looks like that
lovin the content lately. how much did all the steel set you back just for reference
Thanks Ben! It was $550 so far! Cheers mate
Awesome work
Needs to run hotter
22:52 Ryan And I*
Hey man how much time do you reckon you spent on it all up
Dude so many hours!! Hard to say!
You won
Beast that you guys pumped this out in one day came up minnttttt 👌
Was a lot more work than I thought haha! But we got there!
I’m more of a cruiser guy myself but this shit is fun to watch. Keep it up mate
Haha I would love to build a cruiser one day!! I love the 105 and I’d love to chuck a 1hd in it! Cheers for the comment mate!
Got to love the safety boots
Mad
Hey mate, where you have the rails sitting on the blocks, it would be good to close off one side of the blocks (so you can still get in from one side. With weight in the back, there is not a lot to stop them from collapsing or folding over from a lateral impact to the tray...
Okay mate I’ll do that! I also thought about welding a large piece of steel to the back of it to strengthen it up! If I had my time again I’d get thicker box for that!
@@RoamLyfe yeah that would work, but it's not always worth the added weight...
The tray is looking great, good work.
17:15 old mates got sunnie on his head why does he have to close his eyes when the other mates welding 😂
Work harder not smarter 😂😅😅
See her after work everyday. Shes looking sexier every time i see it
🤘🤘🤘
These videos are grouse moite 👌looks smicky mouse
Thanks Noah!!
Film when you make Ryan’s tray
Will
Do!
Very impressive build mate! Are you going to raptor coat it or at least spray paint it?
It’ll most likley get raptor coated!
@@RoamLyfe yea sweet, that'll look sick! 👌
How much did all the Steele in this video cost?
Hey mate $550 so far!
really makes me want to pull my finger out and fab up my own tray
Get onto it man, was good fun and this video should help a lot!
You should put a long arm kit in the patrol
It’s on order currently 🤤🤤🤤
What colour should I raptor line my gq swb ?
Bruh, grey like coal!! Haha
Hahaha might have too
What steel company did you use mate?
It was a place called one steel I believe, in kunda park Sunshine Coast!
Mint video
Keen is an understatement for the finished product!
I’m so keen!!
looks fucking mint
Thanks dude!
grab yaself a sliding bevel mate will make those angle super easy and accurate
Dam wish I grabbed one now! Definitely gonna get one for next time!!
@@RoamLyfe you look like you did a pretty good job cutting those angles, folded up perfect the bevel wouldnt have made much difference. It’s coming along nice !
Thanks mate! A lot more goes into it than I thought but turned out prettt good!
Lay some dime bagsss hahaha
🤘🤘
Yewwww