Gn125h.Camshaft installation.Boring informations'get it wrong and kiss your engine good-bye mother-
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2021
- You will only get one chance in getting the index Mark's to line-up on the camshaft.I had some slight trouble in locating the index Mark's as ther is some slight corrosion.It was almost a complete balls up but luckily for my patience that serves me well...
Just discovered your channell...i have a keeway txm 125 that has the same engine...i bented 2 pair of valves by trying timing them, its a real mess, but after watching these videos now i know what to do, thank you mate, you are the only one that has done tutorials on thrse damn engine valves
Hay quá giới quá cũng chia sẻ video này nhé 👍🥰🥰
Thank you.
once youve built the engine back up, slowly turn the engine over with the rachet to make sure the valves are not hitting the piston, if its out, then strip and refit the cam shaft
You cannot teach me nothing cause you know absolutely nothing.
If you don't see the index Mark from the peep hole ,one should just remove the Spark plug and insert a long screw driver to check the top dead centre and align the cam shaft mark.
You have never ever workted on a motorcycle. I can tell you that you do not know what you are talking about cause you are as dumb as a plank
I installed it wrong and tried to start the engine but it didn't start, is that okay?
Only way to know if you have done it wrong is to open it and pray nothing is bend.Hopefully you get lucky.Make very shore your flywheel index marks are lining up with your camshaft
Also check your valve clearance with a feeler gauge. Ther are maney other vids on hoe to adjust your feeler gauge gaps
@@deliverance3767 Thank you very much ❤️
Great bledy Jersey accent.
Thanks! 😃
GREAT JOB BRO
HOW CAN WE CHAT