Very much appreciate you taking the time to demonstrate this process! Your instructions were perfect. I had to do the process twice until it was perfect but it will get the job done! Thank you.
Hello, Theres a bit of a gap on the right and left inserts where the mat goes. Do you usually align your mat more to one side or try to center it? Thanks for the video! 😎👍
Glad you enjoyed it. Just make sure your mat slides in under the tabs and you should be good! You shouldn’t have to worry about how straight it goes in.
I usually do it after Cricut does an update or if I haven’t used Print then cut in a few weeks or if I notice my cuts looking a little off. I probably calibrate once a month.
I genuinely do not have the 3 lines in the top left corner. Is this a new update where they had moved everything including certain tabs? I cannot find this for the life of me :') I have the Cricut Cut Smart 2 if that says anything
I have tried this a million times. My machine isn’t even scrolling toward the box in the center; is there a video to fix that issue? I even bought a new knife blade thinking something was wrong with my previous one, because it kept saying blade not detected. I’m losing my mind lol.
Here are a few tricks you can try: - turn lights off in your craft space - go over the registration marks with a Sharpie - if using material with a glossy finish apply matte scotch tape over the registration marks - don’t print on dark coloured paper
NEW LOCATION FOR CALIBRATION - View this TH-cam Short here ⤵
th-cam.com/users/shortsQS6YSJBY6tA?feature=share
Very much appreciate you taking the time to demonstrate this process! Your instructions were perfect. I had to do the process twice until it was perfect but it will get the job done! Thank you.
You’re welcome. Happy crafting!
That's really cool. I didn't even know we needed to do this.
Glad you could learn something new.
I found out cause I can't cut certain things and it is forcing me to calibrate
Thank you! Perfect timing!
You’re welcome!
wish the machine just came with a calibrating
sheet
Thank you so much!!
You’re welcome!
Help. Did calibration and all good but wont let me print and cut as keeps asking to calibrate again and again even if i try to skip
Did you figure this out because it keeps asking me to do the same thing
Same 😞
Hello,
Theres a bit of a gap on the right and left inserts where the mat goes. Do you usually align your mat more to one side or try to center it?
Thanks for the video! 😎👍
Glad you enjoyed it. Just make sure your mat slides in under the tabs and you should be good! You shouldn’t have to worry about how straight it goes in.
Do you have any tips on getting this to work? I have tried a million times and it will not cut right
If your machine is not calibrating properly it would be best to contact Cricut support.
How often would you recommend calibrating?
I usually do it after Cricut does an update or if I haven’t used Print then cut in a few weeks or if I notice my cuts looking a little off. I probably calibrate once a month.
i only see 7 on my macbook how can i go to 10 and L i am a newbie to mac and cricut
does my room light have to be off?
No
I genuinely do not have the 3 lines in the top left corner. Is this a new update where they had moved everything including certain tabs? I cannot find this for the life of me :')
I have the Cricut Cut Smart 2 if that says anything
Yes the DS layout has changed. Click your name in the top right corner, select “settings”, select “Machines”, then “machine calibration”.
@@littlecraftnest Thank you SO much for this and this entire video!! Saved me from so much trouble.
You’re welcome.
@@littlecraftnest
This has not worked for me.
I keep pressing the go button and it does nothing!
I did settings, picked my machine and where is calibration?
How do I get calibrate sheets?
The location changed… here’s where it is th-cam.com/users/shortsQS6YSJBY6tA?si=Euo-kfWjpqPdy5VW
th-cam.com/users/shortsQS6YSJBY6tA?si=Euo-kfWjpqPdy5VW
I have tried this a million times. My machine isn’t even scrolling toward the box in the center; is there a video to fix that issue? I even bought a new knife blade thinking something was wrong with my previous one, because it kept saying blade not detected. I’m losing my mind lol.
Oh no. It sounds like a machine defect. Give Cricut support a call.
I just replaced the rolles as they were basically melted.. that sort of helped
My machine is saying that my lines cannot be detected
Here are a few tricks you can try:
- turn lights off in your craft space
- go over the registration marks with a Sharpie
- if using material with a glossy finish apply matte scotch tape over the registration marks
- don’t print on dark coloured paper