Changing Upper and Lower Ball Joint on my LADA NIVA

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 พ.ย. 2024

ความคิดเห็น • 24

  • @baxdesign
    @baxdesign ปีที่แล้ว +1

    Notes for newbies: 1) if you replace the bolts in the ball-joint, make sure they are rated for suspension (eg 8.8 iirc). 2) some ball-joints don't come greased, so you need to grease them before installing.

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +2

      These ball joints are coming greased and I agree for the bolts you need bolts for suspension I forgot to mention that in the video. Thank you for your comment

  • @spencerneedham6216
    @spencerneedham6216 5 หลายเดือนก่อน

    That was a big help to me thanks

    • @PLUKI4x4
      @PLUKI4x4  5 หลายเดือนก่อน

      Always here to help😁

  • @nulledmarian
    @nulledmarian ปีที่แล้ว

    Why did you put the bolts for the lower ball joint tightening from the top? Wouldn't been better to tighten them from the bottom, so the "extra"/remaining screw would come where it wouldn't hit anything? I think on flexes + turning it may hit the drive shaft rubber. At least this is how I did on mine, even though on first try I did it same as you. Hope this helps and keep up the good work (y)

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว

      I didnt think that way, I am driving it for a solid 3 weeks and I didnt hit anything but I agree with you! Next time I will try to put bolts other way. Thank you so much for the info!

  • @leonardasmigmator784
    @leonardasmigmator784 ปีที่แล้ว

    Put little lights in 😄

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      I will!!😁

  • @europeanpaganismrising2022
    @europeanpaganismrising2022 ปีที่แล้ว

    Na krov reflektor može i dole al sa krova najbolje osvjetli.ja sam si na upaljač spoijo smo ugurnem kad trebam.a reflektore na pakettreger leptir maticom ,brzo montiraš i makneš.

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      slažem se da je ta lokacija najbolja ali ne bi stavljao na krov jer bi najrađe krov ostavio netaknut, imam krovne nosače ali njih samo stavljam kada trebam nešto prevesti

    • @europeanpaganismrising2022
      @europeanpaganismrising2022 ปีที่แล้ว

      @@PLUKI4x4 ja jako rjetko koristim reflektore,a za prevoz priksu zakvačim.probaj buš vidio biće fora svakako

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      @@europeanpaganismrising2022 na drugoj nivi sam imao led bar i to se ne može usporediti sa ničime😂 a često moram trimere uzimat kada idem kositi i za to mi se neda uzimat prikolica još nije ni najbolja cesta pa mi ih je najlakše na krovu vozit

  • @anahorvat4036
    @anahorvat4036 ปีที่แล้ว

    Will you change lightbars on your old niva Trpimir?

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว

      I will put everything new on Trpimir

  • @niva1608
    @niva1608 ปีที่แล้ว

    Can you tell him the dimensions of the roof rack? It's great

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      I am not in the shop at the moment I can send you dimensions here in about week or you can reach me on instagram and I can send photos of roof rack and dimensions in DM

  • @sergiopaiva4926
    @sergiopaiva4926 10 หลายเดือนก่อน

    Put light in

    • @PLUKI4x4
      @PLUKI4x4  10 หลายเดือนก่อน

      They are on the car there is a whole another video about it😉

  • @niva1608
    @niva1608 ปีที่แล้ว

    Da li mi mozes reci dimenzije krovnog nosača?Montenegro

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      Nisam trenutno u radioni pa ne mogu izmjeriti, korz jedno tjedan dana ti nepišem koje su dimenzije ili mi se javi na instagram pa ti ga mogu i detaljnije uslikati

  • @europeanpaganismrising2022
    @europeanpaganismrising2022 ปีที่แล้ว

    Ja sam isto mlatio nema druge kad zapeče.strpljen spašen.

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว +1

      Kada zapeknu onda su baš tvrdoglavi

  • @STPirato
    @STPirato ปีที่แล้ว

    Hello,
    You don't put any Torgue on those Axlenuts,or you will destroy the Wheelbearings within a couple Kilometers. The nuts need to be adjusted so you can just feel a slight play when you wiggle on the wheel. It's hard to explain,the play is maybe just about a 1/10 of a milimeter.
    In this link theres a Video showing how to do it,starting at around 4:10 min. th-cam.com/video/xMY1i4y-mHc/w-d-xo.html
    It's in German though. Hope that helps.

    • @PLUKI4x4
      @PLUKI4x4  ปีที่แล้ว

      Thank you so much for the comment I did it similar to that way but didnt know if that is the right way.