Sam, good fix on the antenna. Just one more thing about it, if you ever need more range you could check the frequency of the cell antenna and the frequency of the box receiver. If there is a mismatch you could boost transmission and reception by matching the two. Fixing the original anenna might also provide an improvement.
Sam, you remind me so much of my cousin. You look and sound the same. I watched you guys wrestling with heavy iron, and remember doing that myself 40 years ago. Now, just getting out of the car is about my limit.
Ya got some great footage there bro and what a great team. Yep watched Matts video already, that is a big Cat for sure. Thanks for taking us along. Safe travels. Ken.
We need an unedited video of Geno and his thoughts..lol. I think between you, Matt, Big John, Geno, Frank, and Mike, there could be an Antique Equipment Restorations/Heavy Hauling kind of service started here. 🤔 Appreciate the video as always, Sam. 👍
I’ll come for that Kitty Cat powered Ford 9000 every time. I’ll stay for the shenanigans and excursions every time too. Seriously though, I’m loving the Kitty Cat powered Ford. Hope to have one of my own soon. Thanks for the video, Sam!
Before you dump the air on the truck and trailer you should put some blocking under the trailer by the back tires on the side of your lifting to help stabilize the trailer more
Get a set of PENN DOT guard rails for the push arms or move the dozer at night like we use to do on the 90V DHH with single shank ripper = 57 ton. Or like Solman & Tesevich from Uniontown back in the day without guard rails and blue tooth chains
Again I say, some of the best if not the best videos around!! Thanks Sam for sharing another great episode!! I hope to meet you in person at the steam show in May. Take care and stay safe !!
actually the safety aspect is reverse of what you think using remotes. when using remotes on a boom with big weight you cannot "feel" the load and the big problem you are worried about will sneak up on you really fast and it won't be pretty. I started using remotes on my booms back around 1995 when first offered to me.
Hey ,you got it done ,I would be suggesting that next time you , Wear Hard hats Use a guide rope to control an item in the air ,rather than hanging onto it Fix that throttle control on the crane ,or increase its idle speed so the hydraulic pump can pump enough for low speed control Q,could you have loaded the blade with the D9 over the rear of the trailer and then unbolt and swing without the extra lifting ?or even side load ,driving the Cat up on blocks to get the blade on the trailer deck ? Do some refreshments on the crane weight limits would be wise and add to your knowledge. B safe fellas
you guys are lucky that the hooks did not break , bit of advice Sam when picking up a load the open side of the hook must face towards the outside of the center of the load , the strongest part of the hook is the backside .
Sam, I think there is a mistake in naming the little Terex, after watching this episode and seeing the great job it does, I believe the name should be "The Little T-Rex" as it sure does a big job for a little machine. Lol
Was watching you and Matt from Diesel Creek. I really enjoy what you guys do with all of the old machinery you and Matt come across!! New subscriber to your channel. 👍
The Stellar crane we had would drop the radio connection if a control wasn't used for a certain amount of time. That was a Hetronics radio control. I contacted them and they told me which pot to adjust to change the time.
Watched Matt's video earlier and now settling in to watch this one. Matt is certainly pleased to apparently cross an item off his heavy equipment 'bucket list' - he definitely did good, and knowing that he has a buyer in the wings when he tires of it makes it even better!
Back to back diesel creek and Scrappy Industries videos on a Saturday morning. Thanks Sam!
Don’t get much Better
Saturday afternoon in Europe :-) but a nice video!
Great collaboration video Sam. The little boy in me loves watching this stuff and with two of my favorite channels-that’s just a bonus. 👍🏻
That little Terex is amazing! Definitely a good find.
That crane especially getting it remote controlled is sweet 👌🏼👍🏼👍🏼👊🏼
Hrs after this video was relesed i drove every road in it thanks for the great local content
The “terex on the trailer” pick is awesome. This was fun to watch
Thanks for watching!
@@ScrappyIndustriesRaise it down cracks me up !
sure great to see all you young men outside working.... keep it going...
Sam, good fix on the antenna. Just one more thing about it, if you ever need more range you could check the frequency of the cell antenna and the frequency of the box receiver. If there is a mismatch you could boost transmission and reception by matching the two. Fixing the original anenna might also provide an improvement.
Sam, you remind me so much of my cousin. You look and sound the same.
I watched you guys wrestling with heavy iron, and remember doing that myself 40 years ago. Now, just getting out of the car is about my limit.
Its your cousins unknown twin br. 😉👍
I see this kind of twins to people i now, and almost know, all the time. Its so disturbing. 😂
I'm REALLY impressed that the little crane didn't tip when the blade was completely parallel to the trailer.
The whole operation hinged on cameraman Big John. I hope he got miles paid 😁
Did anyone else noticed on those wait tickets that Sam was overweight on this trailer axles by 3000 lb or so? But I love the attitudes run it.
Ya got some great footage there bro and what a great team. Yep watched Matts video already, that is a big Cat for sure. Thanks for taking us along. Safe travels. Ken.
The day after Dec has always been my favorite day of the year!
Sam your a good friend helping out Matt as you do!
It took me four attempts, but I managed to watch all of it eventually. Entertaining video.
You live you learn best not the hard way!
I just love pulling up in a truck stop full of modern garbage in a old school working rig that’ll never die on you and give you BS issues 💪🏼💪🏼
Its like parking next to a new Lamborghini in my 1964 split window VW microbus, then seeing all the kids taking selfies with my car 😂
@@andrewallen9993 yup I get the occasionally people taking pics of my old rigs
@@JacksonGuitarsPlayer03 😁
You guys a rewriting the osha book of don’t do this!!!😂😂😂😂 amazing job loading it!! Thanks for sharing
Just getting to the end of rebuild an '89 yamaha moto4 (the 4x4 version) , love the simplicity.
Thanks Sam for the good video man.
Teamwork makes the dreams work so much easier
It looks like you have enough equipment ( vintage or not), to start your own construction company
Glad the LTL9000 came out to play.
Sam and Matt, plus gene breaking down a D9. Man it just don't get any better than that! You guys are pretty darn amazing.
Just minty that old ford 👌🏼
Great filming , great entertainment , thanks Sam for sharing , brilliant !
We need an unedited video of Geno and his thoughts..lol. I think between you, Matt, Big John, Geno, Frank, and Mike, there could be an Antique Equipment Restorations/Heavy Hauling kind of service started here. 🤔 Appreciate the video as always, Sam. 👍
I’ll come for that Kitty Cat powered Ford 9000 every time. I’ll stay for the shenanigans and excursions every time too.
Seriously though, I’m loving the Kitty Cat powered Ford. Hope to have one of my own soon. Thanks for the video, Sam!
That's awesome both diesel creek and scrappy industries working together.
Good Job 👍 Thanks for sharing!
Always great to see friends working together taking the pi$$ etc. What was that other machine nearby?
Good friends and teamwork make the world go round !!
I love it when you guys work together. Double content of things I like to watch :)
👍👍👍
Awesome job, fun to see you two collaborate.
Before you dump the air on the truck and trailer you should put some blocking under the trailer by the back tires on the side of your lifting to help stabilize the trailer more
Wow that little crane picked up that blade amazing
Sam love the video and the Terex Died a very good job , your a very good mecanick Sam .
Thank you!
Sweet old LTL brother!
Wow Sam! That remote setup works good on the Terex. I was happy to see it was just the pyro probe on that boost issue. Great video.
Saturday mornings with Sam. 👍👍
That must be a first Mat bought something that started
Get a set of PENN DOT guard rails for the push arms or move the dozer at night like we use to do on the 90V DHH with single shank ripper = 57 ton. Or like Solman & Tesevich from Uniontown back in the day without guard rails and blue tooth chains
Sam that Terex is a little beast of a machine, a bloody good buy and I'm sure you will get a lot of use with it.
I love it when 2 out of 3 of my favorite channels get together and film the same project. Double the fun. Thanks Sam and Matt.
The only down side is, now there are 2 channels I will watch hour long videos of.
I'm retired, I don't have to get anything done anyway. 😊
Again I say, some of the best if not the best videos around!! Thanks Sam for sharing another great episode!! I hope to meet you in person at the steam show in May. Take care and stay safe !!
Nice to see the old ford pulling today! Great ol truck and what a kitty matt got aye?!
Cool stuff Sam!😎 ...Steve B
You've got to talk Matt into keeping it
What a Team !
Sam, love your video content, especially when you team up with Matt and his content when Matt does it as well😊
The little crane that could 🙂
Sam u the man Matt is lucky to have a smart and capable friend like u
58:20 That boom lift cylinder was dropping almost as fast as the winch was lifting.
Great video Sam,Matt sent me here love both your and Matts can do attitude
Much respect from the UK
Neat work mounting the Terex onto the trailer.
Good job Sam. The Terex performed well. 👍🏻
I think so too! It’s handy to have a boom truck at the ready now 😂
Love ya trucks Sam BIG TIME
It's a good morning, a DC and a Scrappy video both.
You 2 are the best u tubers, it’s great to see you working together. From Bob in New Zealand
The Mac truck is cool it has an awesome sound to it and that D9 blade is huge wow
thats a super cool trailer with the hydraulic tail end to reduce the loadin ramp angle ( nice one sam
Two excellent videos. Thanks Sam and Matt.
Good to see you think.
What was the airaid siren when you guys were picking it up at Matt's house?
I was just wondering I haven't seen any comments yet
does Gio have a channel or social? would love to see more of his pete, the short stacks just look really cool with his set up
Good job guys
Always love Sam and Matt!! You 2 are great in my book! !! I realize weeks ago but still entertaining to watch 3 clowns! 😂😂
That trailer look better with two more axles and eight more tyres, great video thank you.
Ah brilliant Sam! Queued up right in front of DC’s video!
actually the safety aspect is reverse of what you think using remotes. when using remotes on a boom with big weight you cannot "feel" the load and the big problem you are worried about will sneak up on you really fast and it won't be pretty. I started using remotes on my booms back around 1995 when first offered to me.
By doing it this way it makes your unit even and solid on the ground!
thats a nice flat top Sam has there the terex wopks just fine on it I think your grove would work too
Hey ,you got it done ,I would be suggesting that next time you ,
Wear Hard hats
Use a guide rope to control an item in the air ,rather than hanging onto it
Fix that throttle control on the crane ,or increase its idle speed so the hydraulic pump can pump enough for low speed control
Q,could you have loaded the blade with the D9 over the rear of the trailer and then unbolt and swing without the extra lifting ?or even side load ,driving the Cat up on blocks to get the blade on the trailer deck ?
Do some refreshments on the crane weight limits would be wise and add to your knowledge.
B safe fellas
That Terex is a little badass
I love the Dinky crane
Gotta I’m super impressed with that TEREX crane and nice job getting the remote system tied-in!
I am impressed with the trees crane. Wish I had one before I retired.
The Ford out did the Peterbuilt, Explaine Wheel up wheel down On the 6 wheel truck, one at the cab was up and # 6 thay put down.
you guys are lucky that the hooks did not break , bit of advice Sam when picking up a load the open side of the hook must face towards the outside of the center of the load , the strongest part of the hook is the backside .
Great job Gentlemen 👍👍🍮🍮🤗
Love that Ford
Put a drop of oil on the top of both batteries posts it will stop corrosion.
Sam, I think there is a mistake in naming the little Terex, after watching this episode and seeing the great job it does, I believe the name should be "The Little T-Rex" as it sure does a big job for a little machine. Lol
Wow I can’t believe no mashed fingers 😂! All ways happen to me during cold weather! Great video guys. Keep it up!
Great video men .
U should convince matt that he NEEDS a crane like urs ! He could use in his shop AND out on his property !
His got the big one now. Nothing wrong with being over powered for a task lol
Awsome!!
This is my first time watching your videos. I love that LTL 9000. I bleed Ford blue!
I'm guessing you didn't have to cross any DOT scales. They probably gotten a little grumbly with that hook swinging 😁😉
What a Great bunch of Guys. That Terex was a Great Buy Sam. Watched every minute of yours and Matts videos. I just love it.👍🔧🇬🇧
Was watching you and Matt from Diesel Creek. I really enjoy what you guys do with all of the old machinery you and Matt come across!!
New subscriber to your channel. 👍
"It'll either work, or it'll be flipped over" Either way it's a video I'd watch. lol
Big John is making some cinematic magic!
Thx for videos. That little crane is crazy useful. Oh yeah your timing and editing are getting better good luck and keep going
You should have charged Matt by the pound for that job!
The Stellar crane we had would drop the radio connection if a control wasn't used for a certain amount of time. That was a Hetronics radio control. I contacted them and they told me which pot to adjust to change the time.
I was sad to hear the d9 is not going to Matt’s home It be bc a cool addition and you never know when you might need one
Didn't mean to be smart with comments about truck and trl but as I say it was my life for about 45 years.
Watched Matt's video earlier and now settling in to watch this one. Matt is certainly pleased to apparently cross an item off his heavy equipment 'bucket list' - he definitely did good, and knowing that he has a buyer in the wings when he tires of it makes it even better!
Awesome looking little Terex crane looks clean great job m8 👍🏻