LRT-2 Lockring Tool - Shimano® STEPS
ฝัง
- เผยแพร่เมื่อ 19 พ.ย. 2024
- More info: www.parktool.c...
Designed and built to remove and install the lockring that retains front chainrings found on Shimano® STEPS® e-bike motors.
• Fits Shimano® STEPS® E6100, E7000, E8000 and E9000 e-bike motor systems
• For lockrings with 54mm outside diameter with 16 notches
• Replacement for Shimano TL-FC39 tool
• 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque
• Constructed of 4140 heat treated steel and plated for long life
Related Products:
• LRT-1 Lockring Tool - Bosch® Gen 2 ▶︎ www.parktool.c...
• LRT-3 Lockring Tool ▶︎ www.parktool.c...
• LRT-4 Lockring Tool - Shimano® Direct Mount ▶︎ www.parktool.c...
• TWB-36 Crow Foot ▶︎ www.parktool.c...
➤ Fix It:
Did you know that Park Tool is the #1 resource for bicycle repair education?
• Visit our TH-cam Channel: / parktool
• Visit the Repair Help section of Parktool.com: www.parktool.c...
• Check out The Big Blue Book of Bicycle Repair: www.parktool.c...
➤ About Park Tool:
Park Tool has been manufacturing bicycle specific tools since 1963. Based out of St. Paul Minnesota, we are the world's largest bicycle tool manufacturer. A long-term dedication to quality, innovation, and customer service has made Park Tool the first choice of professional and home bicycle mechanics around the world.
➤ Subscribe: www.youtube.co...
➤ Like: / parktool
➤ Follow: / parktoolblue
When removing, once the lock ring is loose, remove the crank arm fixing bolt to prevent it from being stripped out by the turning LRT.
... the very best of luck trying to find one in stock.
www.parktool.com/product/lockring-tool-shimano-steps-lrt-2 In stock at parktool.com
What about e6002 on elops 940e...what size it is ?
Will this work for ethirteen cranks, as they have a deep recess?
No, e13 has a proprietary tool size for that. Use their tool
@@parktoolok thanks for confirming. If you happen to know the tool pls let me know, as I've been going round and round. Thanks!
Did you find a solution for e13? I've been searching and searching and no solution.
How do you remove the non drive side crank arm?
The Shimano Steps has two styles. This tool fits systems using a slotted crank. Use a 5mm hex key to loosen bolts. Remove the cap, and the arm pulls off.
Is this the same tool for ep8?
Yes it is.
if you have the new ep801 NO... it now have a smaller 16 notch 42 mm diameter
@@toetz4491how do you figure out which motor you have? I have a 22’ Orbea rise with the ep8 motor?!
@@jamesdavis9507 you have the ep8 motor .. if you take the motor off, youll have only two small sensor wire attachments (ep801 has 4) and the thick power wire (battery) is pointing to the top (the ep801is pointing sideways to mitigate the water ingress issues)