@@PilgrimGuttersexactly what I was thinking it’s just for cosmetic work. Which the home owner doesn’t see anyways. Just add a whole and keep it moving. 😂
I recomend diferent sealant we used 2320 gutter & seam trypolymer sealant. you dont need use the finger in the outlet and the end cap saludos de phoenix az
Finally I see a gutter guy in TH-cam that knows what he's doing ....poking the holes putting in the hangers evenly all while the machines running...I see a lot of guys run the gutter than pole the holes than install the hangers
Get rid of the inserts, they only cause resistance going into the down. Get the punch for holes it's a major time and work saver. Punch your hole attach your down. Theat easy. No geoseal needed.
I don't think this guy uses rivots by the way he cuts out the down spout holes lol. First video I run into on TH-cam and this guy knows what he's doing and expertise with his snips. This guy will get the job done in probably less than a day and not trying to come back to job. Using all them fancy cut out tools and rivots will take more of your installing time. I was fortunate to learn about installing gutters with a Hispanic similar to how this guy does it and learn tips and tricks. Only done it for maybe 5 months but I feel like I was getting taken advantage of my pay. Impatient boss and he had his days where he did shit work and I didn't like that. Basically the man was ungrateful.
Me too. I am so frustrated with the amount of water that ends up going behind the gutters and coming down the fascia. I have even bent my drip edge so that it kicks out further and it's still not good enough. Wtf
I have a question. I clean gutters as a job and I always wonder why there's always only 1 exit on each gutter line. Sometimes irrigating mud from one side all the way to the other takes too long. Why not just have more exits?
Probably dont snap lines & check run . I installed gutter for many years . Definitely an art to it . Not impressed w/ clips over back of gutters . How do you get it under drip edge ? Very important !!
It took me 1 hour to punch out the downspout flange, I praise your expertise
New Tech Gutter Machines are our favorite machine.
Let me know if you disagree
Still confused why you dont silicone on the bottom of the downspout flange before dropping it in
No need to. He technically doesn’t even need to seal the outlet because any water that leaks out goes into the downspout still.
@@PilgrimGuttersexactly what I was thinking it’s just for cosmetic work. Which the home owner doesn’t see anyways. Just add a whole and keep it moving. 😂
Tech Machines are great. Concord Gutter Service is the best in town.
I recomend diferent sealant we used 2320 gutter & seam trypolymer sealant. you dont need use the finger in the outlet and the end cap saludos de phoenix az
Finally I see a gutter guy in TH-cam that knows what he's doing ....poking the holes putting in the hangers evenly all while the machines running...I see a lot of guys run the gutter than pole the holes than install the hangers
Tech machines are the best!
Brother used his finger to smooth the caulk 💀. Clipped brackets now good luck getting under drip.
This is extremely satisfying
Get rid of the inserts, they only cause resistance going into the down. Get the punch for holes it's a major time and work saver. Punch your hole attach your down. Theat easy. No geoseal needed.
I’m about to add a downspout to my own gutters. Is that a left hand snips you cut the hole with? Do you add rivets around it later?
You can use stich screws or rivets. Ima go install some tmmrw on a huge building hope yours came out perfect
I don't think this guy uses rivots by the way he cuts out the down spout holes lol. First video I run into on TH-cam and this guy knows what he's doing and expertise with his snips. This guy will get the job done in probably less than a day and not trying to come back to job. Using all them fancy cut out tools and rivots will take more of your installing time. I was fortunate to learn about installing gutters with a Hispanic similar to how this guy does it and learn tips and tricks. Only done it for maybe 5 months but I feel like I was getting taken advantage of my pay. Impatient boss and he had his days where he did shit work and I didn't like that. Basically the man was ungrateful.
What brand of chaulk?
I you're using the hangers with clips. How do the clips effect going behind the drip guard
I want to now the same thing !
Me too. I am so frustrated with the amount of water that ends up going behind the gutters and coming down the fascia. I have even bent my drip edge so that it kicks out further and it's still not good enough. Wtf
Awesome and i agree with finally someone knows what they are doing and you can tell he didn't come to work to play 😂
What kind of silicone are you using let me know thanks
Como se llama la cola que pones tu ?
Those holes in the downspout tap are for screws
A machine!
Professional
Dude can draw and cut that shape in his fucking sleep. That was impressive lol i can tell youve done a few gutter systems.
What if there's a window right below where you punch in the outlet.
Measure b4 u cut
he's definitely not randomly putting the downspout wherever he wants. at this point he's taken all his measurements
I have a question. I clean gutters as a job and I always wonder why there's always only 1 exit on each gutter line.
Sometimes irrigating mud from one side all the way to the other takes too long. Why not just have more exits?
For visual purposes, nothing to do with efficiency
I think it's because it has to be sloped one way for the water to drain properly
wow
How far apart are those internal hangers?
2 ft apart is recommended normally
Installation? 🫤
If it flows one way why two drains
It flows both ways
Probably dont snap lines & check run . I installed gutter for many years . Definitely an art to it . Not impressed w/ clips over back of gutters . How do you get it under drip edge ? Very important !!
Now show us how u destroy the gutter apron while installing that 😂
You know this dude knows how to please a woman
Weak and cheap brackets
Try NOT using an outlet next time. Less silicone and less places to leak.
Hate those hangers
I wish I could get some 2320 pookie. They got this other shit now that acts like jb weld. It’s sucks donkey nuts.
Вот что значит, знает свое дело.
Um.
0 for you
Thanks!