ARRMA UPGRADE: INSTALL 6S METAL STEERING BLOCK-INTEGY | HOW TO ADJUST PILLOW-BALLS

Hey Crew! In this video, I demonstrate the removal and installation of upgraded Integy Metal steering blocks on my Arrma Kraton RC car/monster truck. This install applies to most 6S Arrma RC vehicles, namely;Talion,Outcast,Notorious and Typhon. This is basically the only metal suspension upgrade that I install on my cars!
FRONT: Integy RC Model Hop-ups C28734ORANGE Billet Machined Steering Knuckles for Arrma 1/8 Kraton 6S BLX www.amazon.ca/...
REAR: Integy RC Model Hop-ups C28735SILVER Billet Machined Rear Hub Carriers for Arrma 1/8 Kraton 6S BLX www.amazon.ca/...
PLEASE HIT THE LIKE BUTTON👍🏻!
Contact me:
[e-mail]
Instagram: / phillyb_rc
Facebook: / phillyb_rc

[@elimatus]

These hubs are so worth it! I have got those for my notorious because the plasic parts kept popping out. Now the problem is fixed.
Great video dude!👍

[@phillybrc]

Yes, I’m hoping for the same! Thanx for watchin’

[@RCRoads]

Nice job showing how to replace steering blocks. Good advice about keeping your fingers clear from damage. I can't count how many times I've jabbed myself with a screw driver.

[@phillybrc]

Haha, likewise. Wrenchin on RC’s is hazardous!! Thanx for watchin’!

[@user-hu7gt2uo3v]

Great video! You always give clear and concise directions. Thanks for sharing 👍

[@phillybrc]

I’m so glad you think so! Means alot coming from you ! Thanx

[@tktk-om8cg]

@@phillybrc so if I replace front steering hub that will fix pop out axles because I'm getting a little frustrated with my 6s kraton exb

[@phillybrc]

@@tktk-om8cg Well, yes. this keeps the pillow balls from popping out...in turn, keeping the the axles from popping out.

[@tktk-om8cg]

@@phillybrc thanks because I was ether going to sell it or take alllllll the electronics out and try a different brand roller 😅

[@AD-xc1qz]

Thanks for sharing your experience!

[@phillybrc]

Thanx for watching!

[@gregoryallen790]

The removal and cleaning of the front and rear diffs completely off to the frame would be a good video not many on TH-cam

[@phillybrc]

Hey bro. You mean taking them off the frame? Like, to swap the chassis out?

[@gregoryallen790]

@@phillybrc yea i didnt look to see if you've posted one or not but I have been looking for a decent video

[@phillybrc]

@@gregoryallen790 ok dude, good to know. Ya, good suggestion. Thanx alot

[@markjones5199]

Great video Phillyb!!!

[@phillybrc]

Thanx for watchin!

[@Rcstuff562]

Amazing video my man very well explained you saved me hours of headaches 🙌🙌

[@phillybrc]

Glad to hear! Thats what i m here for! Thanx

[@oscarcampos8211]

Did you have to get longer axles In order to use the aluminum hubs? In my Typhon 6s I’m going w hot racing aluminum steering blocks and rear hubs but the rear stock axle is too short and I can’t get the pin and hex far enough to pop the pin through.

[@phillybrc]

No I did not. Not a single issue. Now, I do have the red spacers removed on the end of the control arms

[@OldManPaul]

Informative. Thank you sir.

[@phillybrc]

@@OldManPaul thx for watchin

[@takeuchitb007]

Nicely done Turk!

[@phillybrc]

THANX TURK!

[@islandrc-duke1972]

awesome upgrade and install

[@phillybrc]

Thanx dude!

[@RickJamesFPV]

Excellent video bro! Thanks. Subbed🤙🏾

[@phillybrc]

THANX ALOT! 🤜🤛

[@steve_7186]

Thank you I needed this 👍🏻

[@phillybrc]

Awesome Steve. Thanx for watchin

[@SiRTHiZZL3]

I'm starting to default to your HOW TO vids more and more! Keep it up!! Great content!
Btw, Will these work on the Fireteam??

[@phillybrc]

Right on! Thank you. Let me know if there is a video you need, I’m open to suggestions. I believe they will work on Fireteam but i m not sure. I ll look into it and get back to you.

[@SiRTHiZZL3]

@@phillybrc ok actually...when you find out, if its a go... MAKE A HOW TO! 😆

[@phillybrc]

@@SiRTHiZZL3 LOL. If they fit, you can use that video because it will essentially be the same! I ll get bavk

[@phillybrc]

Are you i to 3s Arrmas also?

[@hendrixtarantado2114]

Any recommendations on something similar to that part that would fit on the big rock? I bought and replaced mines with metal ones when they broke but I've been having problems with the top and bottom screws just falling of all the time. Tried the ones that came with it and also tried different screws similar to it but nothing seems to work. Every time I drive it around and back to me I will immediately notice that one wheel is leaning which means screw decided to bail again. Might just go back to plastic ones for now since it's more reliable than the metal ones I bought. 🤦

[@phillybrc]

Oh geez, I put the Hot Racing metal knuckles on mine. Use a dab of blue loctite to keep those screws in there. Also, there is a small plastic sleeve that is prone fall out. Top screw i think

[@hendrixtarantado2114]

@@phillybrc thanks for sharing.. I'll probably try the hot racing one 👍👍👍✌️

[@phillybrc]

@@hendrixtarantado2114 Let me know how you make out

[@g.b-MTB-trail-jumps3062]

Perfect job bro...very helpfully..
Keep it up my friend....wating for bash👑

[@phillybrc]

Thanx for that! Bash comin!

[@RCCaveStudios]

Looking good brother I'm certain those won't break but if they do try the Vitavon they work AWESOME on my Kraton 8S EXB !

[@phillybrc]

Ok my man, I will!! These came with the car uninstalled, had to try them out I figured. Thanx bro

[@RCCaveStudios]

@@phillybrc yeah man they are tuff I had integy on my Typhon mega at one point as far as all the hubs shock tower sheild arms and stuff great billet design

[@michaelp3149]

How were the quality on these vs the hot racing ones?

[@phillybrc]

On par, I m still using them, not one issue. I recommend!

[@therchotspot]

Those are nice. I have the hot racing ones but those look much better. Good vid!

[@phillybrc]

Thanx! They seem like similar products… they are workin great!

[@oscarcampos8211]

What car did you add the the hot racing set on? I’m adding them to a Typhon 6s and the axle is too short.

[@therchotspot]

@@oscarcampos8211 kraton 6s

[@richardwolters997]

👌🏽

[@omega_rc]

Do these work for the exb models as well?

[@phillybrc]

Yes, they do. Thanx!

[@ghostfacekilla_sd6192]

That shitbis sick

[@crimsonram77]

Absolute hubs are a must but never thr A arm's

[@joestricklandsr705]

Nice bro

[@phillybrc]

Thanx alot

[@Chopperking1977]

Just subbed

[@phillybrc]

YESSS! Thanx alot!

[@nasles1538]

very good video 👍

[@phillybrc]

Thank you

[@Genxpoppy]

Nobody show how to set camber !!!!

[@phillybrc]

Hmmm, just figured it was shown so many times. I guess not. Sorry

[@phillybrc]

th-cam.com/video/puMKzmdEPsQ/w-d-xo.html

[@phillybrc]

Able to put link here?