Looks like I have the same Crown gas boiler... only on it's 4'th year and throwing a code 4 error. Short cycles a few times, the error code goes away and then seems to run as should.
My mothers apartment has 6 radiators but only 2 that are actually working. The other 4 have been turn off at the valve because they make her apartment to hot and also make alot of noise. Banging all day and night. Would it be bad for the boiler or the pipes themselves just having the 2 radiators working ?? Would this cause problems to the rest of the pipes and boiler,mm Note.. I did tilt the banging radiators several inches but it did not make any difference in the. Noise. So I turn those 4 off. The crown boiler is has an 85,000 BTu output and a 103,000 BTU input. Currently working nicely. I drain all the water this weekend and fill it back up. unclog the sight glass, pigtail and the pressure gauge. I lower the pressuretrol settings to 1.5 PSI on the main and .5 on the differential. This boiler heats up a second floor apartment. Do you think these are the right settings?? I would really appreciate your input on this. Thanks you.
That needs air separator like a spirovent. And the expansion tank is not upside down. That is its position when installed on a scoop. Also is that a galvanized nipple on the water line after the auto fill valve. Of so thats a no no where I'm from. Inspectors or gas company would red flag the boiler for that. Especially being on the potable side.of the backflow
It sucks when a guy push-pulls a boiler. Also, no code update. Then, when you come in to fix, you have the responsibility to break the bad news. They should be glad you're there Chuck.
Watching from Myrtle Beach SC ! Great video
Awesome! Thank you!
Looks like you will be back installing that air scope, lots of air in that system when not installed correctly!
for sure.
What causes a high pitch ring or whistle when the boiler comes on? Its a brand new crown unit.
Is 20 psi bad ?
Looks like I have the same Crown gas boiler... only on it's 4'th year and throwing a code 4 error. Short cycles a few times, the error code goes away and then seems to run as should.
Where is the water level sight
Would love to see a video on you installing the air scope. Nice job!
Coming soon! Next heat call I will have material on truck. ha.
Nice one Chuck 👍
Glad you enjoyed it
I had NO IDEA my favorite TH-cam plumber was from my state! WTH. If I don’t figure out this crown boiler soon I’m calling!
fix it up old chucker or call lav he got his trk bak agin up and rolling
roll with me James. We have a few laughs....we will call stevie boy up.
Hey Chuck, don’t get Old Glory wet! 🇺🇸
Attention!!! Sir Yes Sir.
How long are we going to watch a system empty out?
lol....thanks tom
My mothers apartment has 6 radiators but only 2 that are actually working. The other 4 have been turn off at the valve because they make her apartment to hot and also make alot of noise. Banging all day and night. Would it be bad for the boiler or the pipes themselves just having the 2 radiators working ?? Would this cause problems to the rest of the pipes and boiler,mm Note.. I did tilt the banging radiators several inches but it did not make any difference in the. Noise. So I turn those 4 off. The crown boiler is has an 85,000 BTu output and a 103,000 BTU input. Currently working nicely. I drain all the water this weekend and fill it back up. unclog the sight glass, pigtail and the pressure gauge. I lower the pressuretrol settings to 1.5 PSI on the main and .5 on the differential. This boiler heats up a second floor apartment. Do you think these are the right settings?? I would really appreciate your input on this. Thanks you.
Is it a steam boiler?
That needs air separator like a spirovent.
And the expansion tank is not upside down. That is its position when installed on a scoop.
Also is that a galvanized nipple on the water line after the auto fill valve.
Of so thats a no no where I'm from. Inspectors or gas company would red flag the boiler for that. Especially being on the potable side.of the backflow
all true.
Wouldn't it be nice if the customer cleared the area around the boiler? It's tight enough in there without having to fight through and past obstacles.
so true. a time killer.
It sucks when a guy push-pulls a boiler. Also, no code update. Then, when you come in to fix, you have the responsibility to break the bad news. They should be glad you're there Chuck.
I was glad to get er done.
I thought boilers where HVAC related
Wow that’s a real hack job
some tlc get that joker back in line.
I’m Sorry ☹️ And For Your Video and With my Video Music 🎶 JOJO Beckers’s
your music paid for from Epidemic player. Thank you for some tunes for the vids brother.
Another inefficient boiler that's not piped correctly.
true that martin
👍👍
Mikey in da house!
Yes sir.
Brew in da house!
👍🏻🤙🏻!
ya dawg.
Why do people pack so much crap around their mechanicals? No realization of fire hazards and ease of service.
so i can trip and fall all over the place
Do not buy this junk boiler this is a garbage boiler keep breaking down .
Crown is a good company. Get er serviced by a pro
I know who installed this boiler