Hi. It isn't. The spring is only to push the knife out once inserted to be able to remove it. It is hold in place with a magnet. So the holder is actually at a dead end in normal use. Grts.
@@kantichio2097 Thanks but not that part, the other part that you put that one into. The cylinder/spring/collet that you attach to your spindle. Thanks
Waaaaaay better if you turn the sound off!
hello do you add any offset to the program or you are using a simple contour toolpath?
Where can we buy it
Nice work. Any reason why you add a spring into the housing? From what can see, it looks like the tips are already spring loaded. Thanks!
Hi. It isn't. The spring is only to push the knife out once inserted to be able to remove it. It is hold in place with a magnet. So the holder is actually at a dead end in normal use. Grts.
He is right about it. You could just connect it to the collet from the thin tip at the top.
*Note.* It did not work this way.
How by these bit
Good afternoon, what is the name of the piece and where can you buy it to be able to cut vinyl with the cnc router?
Thanks
Where did you get the holder? The part in your left hand at 1:32 ? Thanks
US $4.22 41%OFF | Tungsten Steel Blade Holder + 9pcs 30/45/60 Degree Blades Vinyl Cutter For Roland Carving Cutting Plotter
a.aliexpress.com/_m0cnAVe
@@kantichio2097 Thanks but not that part, the other part that you put that one into. The cylinder/spring/collet that you attach to your spindle. Thanks
@@GregsStoneYard i made it with a lathe
@@kantichio2097 Ah OK, thanks.
@@kantichio2097 do you sell it? i mean the holder that goes into the collet? That's what my spindle needs
كم قيمة نزول z
1mm?