what a useful channel. I have an 8 channel Dahua for 2 years now and only now am I realizing I can use it like this. I got woken up after an attempted robbery so now I am serious. Beams sorted, nonlethal gun sorted, CCTV sorted what next?
I am eating up your videos and can't wait to adjust my DAHUA NVR & PVRs further when back in South Africa, Mosselbaa Very well done and Thank you for sharing all this, which is quite an effort . Please keep on going, as security in SA is so essential
@@ecologicaltime hi I was hoping I could get some advice I’m looking to set my back yard a rectangle shaped apx 50x40ft to set a loud alarm to motion detection with minimal false alarms I’ve bought several EZVIZ cameras which have great motion notification to my phone but no way to set volume of the alarm and constantly missed I have a q-see 4 cam receiver unit which has constant false alarms just from the sun moving I also have a motion sensor system but it too has false alarms it was kinda a cheaper unit Any advice would be greatly appreciated
Great video, thank you. BUT! I need a NC alarm output to link with my alarm system, and do not wish to add a second relay to make this available. Can I change the NVR NO to NC?
Thank you so much for your wonderful videos..i programmed the NVR after watching them....i have a question... how can I extend the motion detection recording time it catch the car but only about 1 second i can see the car then its gone
You are such a genius, I subscribe recently to your channel and I am always waiting for further detailed videos of yours, thanks for every moment you spend for us
Hi thanks for video can you explain how I set up the red and blue lights to go off when motion detection and not alarm. Just lights I’ve tried so many options but can’t find it Thank you
Hi. My DVR noes not have the alarm outputs but it has a functions for a wireless siren, connected to a usb gateway or camera gateway. I would like to know if you have a video or could make a video on what is the usb gateway and how to set it up. Thanks
Can you delay the alarm protection for legit intrusions such as authorized persons entering protected spaces or can AI person recognition be used to prevent the alarm going off?
Thanks for this tutorial video. Plz can this model ( DHI-NVR4208-8P-4KS2/L 8 Channel 1U 2HDDs 8PoE Network Video Recorder ) be used to achieve the alarm output.
I have a plug beside input and output its written ctrl and next just "P". Wonder what it does. So the 1, 2 , 3,4, gnd is input. No1, C1, gnd, output after that ctrl, p, this makes me wonder how to wire this up as my back panel is completely different
Sounds like you might be using a OEM product.. That is also how mine is setup as well.. So here is some info about mine. While mine says it is a 2 alarm out I only have one so I keep 2 turned off. Then for what ever reason the CTRL and P is a 13vdc output. If you use a multi meter you will see that if you put your Red lead in the CTRL or P and then the black lead in the Ground next to the P it will register a 13.36Vdc in both areas... My Dahua system with Alarms are done right. However my Dahua DVR's with alarms have 8 inputs and 4 outputs..
@@revo2maxx thank you for your info. Thats exactly im doing after reading the manual and asked the seller which was not really helping. Your info confirm me thanks alot.
As per the manual for the 42xx series NVR, the CTRL is a 12v trigger supply to operate any external alarm relays you may have (close gate/electrify fence). I'm a bit disappointed because I looked up the specs and only bought it because it said 2 alarm outputs. It does not state what the P is for and I don't have a multimeter handy. So not risking connections to those ports.
As per accident I've found your videos as I struggle a bit with my recently purchased DAHUA NVR and my 6 cameras brought from overseas. You explain exactly these detailed features which is so essential to know to enable me to install further functionals to come close to the picture what a CCTV has to be able to when I did make my research in the market & products. Like also to Link extra sirens and may flood lights as shown to my NVR. Need to do it myself because there's hardly anybody as deep in details here in Mosselbaai!! Maybe a help for another video would be how to enable Push videos from the DAHUA when the system triggers my perimeter fence/sections. Couldn't get it working and receive only e-mails BUT need to get a PUSH ALARM VIDEO to my cellphone & tablets 😙🤔
@@ecologicaltime WOW, thank you so much!!!! Will try to get into that story ALSO need to consider to replaced my old IDS alarm system ,think is 8216 or so, And find out if I can integrate it into the DAHUA ALARM platform to manage everything with the same software.. Will try DAHUA express, run it on a separate security Intel NUC computer and maybe TOGETHER with IDS, DAHUA or KERMI ALARM control??🤔
So click on the DMSS in your Phone, then click on the camera you have setup with an IVS rules, then click on the icon top right (6 sided looking thing) then click on Notification, if you have not clicked it to turn it on do so now, Then options will come up show you time settings, Motion Detection, SMD, Intrusion Alarm, TripWire Alarm, Scene Changing, Cam Masking, Disk Alarm, Face Alarm, Temperature Not within, and Other Alarms. (Other alarms, IPC offline, License Plate Recognition, Defocus, Abandoned Object, Missing Object, Fast Moving, Queuing People, Parking Detection, Loitering, Fall, People Standing, Violence, Approaching, People No Error,
Recently I have noticed that a LED flashing light connected at the rear green connecting block (first two inputs on the left of the top block) remains on all the times. I can't find what the problem is and why the LED light no longer turns off after Motion detection activation. What is wrong and what do I have to do? I haven't had this problem before. Each time motion is detected the NVR beeps and the LED light will flash and then goes off at the set time given. Also, the notifications on my mobile have stopped when motion detection is being activated. It doesn't make the phone sound a beep, nor leaves a short clip on the phone with an accompanying sound. It says that I don't have an alarm hub, please add one. Where do I look for this Alarm hub? If I attempt to add this Alarm hub, A QR scanned appears. Where do I find a QR code on Dahua NVR? It's stressing me out, as it is a pain in the butt to keep the setting to remain as set. Instead, it seems to disconnect itself. Example. I set it to give me mobile notifications with a sound and withing a few weeks those settings are no longer valid/operating. And I haven't touched anything. Plus, again, some days I get notifications with sound, other days I get it during the day but not at night. As strange as it seems, it only makes things quite stressful. Not only that, but when I get a notification with a beep, the damn thing gives me a notification from 10 minutes to up to half hour later. Which means that if someone broke into my home while I am on my way shopping a few kilometres away, they will have helped themselves for that time, until I get a notification. And by the time a return home in a hurry, they've long gone. How do I fix this problem please? Thanks.
Fantastic video. Please I checked 'send email' box on video detection but nothing is send to my email. What should I do to activate or enable the feature. Thanks
I got this drowning sound. It’s not clear. What can this problem happen? All the camera sound is drowning. It happen resently. Should I turn the settings sound on and off to reset?
I've just realized that the XVR I bought and already installed three months ago isn't what I wanted 😢, especially in this crime country called South Africa. I wish watched videos like this before purchase 😪
Great Video that you are offering for some people but the info your adding isn't 100% correct.. When your talking about the Motion Detection of the NVR you say that your setting the Schedule for the Alarm output and that isn't the case your setting the TIme for the Motion and by doing that your system will not detect motion on the times you removed.. You need to be careful what information your adding to people because someone might end up missing something that was important because they removed motion event time and not alarm time.. There are a few things that you saying that isn't 100% other then that it is nice that someone has added the Video.. It is crazy that my OEM for a USA based company has better options then the 4216E-AI that your showing in your video.. One of the things that drives me nuts about naming them same with back numbers like yours 4KS2 I am guessing that model has older FW then my model with a 2020 FW.. I mean yours offers options mine don't like the Scene Change Tab and PIR alarm Tab.. However mine offers 2 Standard IVS rules for any camera connected AI or not I have 3 AI cameras right now and I have 5 AI channels. However I have added 3 channels from my AI DVR and doing this I can add 2 more AI for 7 channels of my 16 right now that are AI with IVS rules
Thank you sir for ALL YOUR VIDEOS. I use them literally as Trainning for me. Greatly appreciated.
This is the most easy understand cctv guide I ever see. Excellent. I liked it and subscribed due to this.
He Makes the best videos. Study material if you ask me.
Good Slang, Nice way of speech.. Simple and clean explanation
I love this dude's videos. He speaks the French that I undersyand.
thank you for all great videos and Excellent illustration
thank you
@@ecologicaltimethank u sir.
Very useful information thank you 🙏🏻 so much
Perfect illustration 💯💯💯
what a useful channel. I have an 8 channel Dahua for 2 years now and only now am I realizing I can use it like this. I got woken up after an attempted robbery so now I am serious. Beams sorted, nonlethal gun sorted, CCTV sorted what next?
Dang that's nuts. Be safe and be aware 🙏 crazy world out there just crazy
I am eating up your videos and can't wait to adjust my DAHUA NVR & PVRs further when back in South Africa, Mosselbaa
Very well done and Thank you for sharing all this, which is quite an effort .
Please keep on going, as security in SA is so essential
thank you.
@@ecologicaltime hi I was hoping I could get some advice
I’m looking to set my back yard a rectangle shaped apx 50x40ft to set a loud alarm to motion detection with minimal false alarms
I’ve bought several EZVIZ cameras which have great motion notification to my phone but no way to set volume of the alarm and constantly missed
I have a q-see 4 cam receiver unit which has constant false alarms just from the sun moving
I also have a motion sensor system but it too has false alarms it was kinda a cheaper unit
Any advice would be greatly appreciated
Great video, thank you. BUT! I need a NC alarm output to link with my alarm system, and do not wish to add a second relay to make this available. Can I change the NVR NO to NC?
Where do you get the alarm itself? Which one are you using in the video?
Thank you so much for your wonderful videos..i programmed the NVR after watching them....i have a question... how can I extend the motion detection recording time it catch the car but only about 1 second i can see the car then its gone
You are such a genius, I subscribe recently to your channel and I am always waiting for further detailed videos of yours, thanks for every moment you spend for us
Such a great tutorial. Thank you.
Hi thanks for video can you explain how I set up the red and blue lights to go off when motion detection and not alarm. Just lights
I’ve tried so many options but can’t find it
Thank you
Can you use all types of cameras?
How can I connect my Airshield with the Nvr over relay ? Do I need something for that ?
Hi. My DVR noes not have the alarm outputs but it has a functions for a wireless siren, connected to a usb gateway or camera gateway. I would like to know if you have a video or could make a video on what is the usb gateway and how to set it up. Thanks
Can you delay the alarm protection for legit intrusions such as authorized persons entering protected spaces or can AI person recognition be used to prevent the alarm going off?
Great videos! Im about to purchase the IPC-HDW3849H-AS-PV cameras. What NVR should I buy that will support alarms ouput and the wizesense features?
Great video, thank you very much!
Thanks for this tutorial video. Plz can this model ( DHI-NVR4208-8P-4KS2/L
8 Channel 1U 2HDDs 8PoE Network Video Recorder ) be used to achieve the alarm output.
Bloody fantastic videos. This is the best. Tutorial 💪💪💪💪💪❤️❤️❤️❤️🏅🏅🏅🏅🏆🏆🏆🏆🏆
Awesome video, however I was wondering how I make it so if one cameras detects motion all cameras go off based on only one getting motion.
You are a smart man, thank you
Hi, dont you have used NVR and cameras that you selling? Good content
Can you tell me what platform Dahua built software on?
Your videos are so helpful, thanks.
Dahua NVR4216 recorder, we want to get contact or trigger for alarm output, how can I do it?
Very helpful! Can yoy Make videos also on access control please?
Very helpful. Much appreciated.
I have a plug beside input and output its written ctrl and next just "P". Wonder what it does.
So the 1, 2 , 3,4, gnd is input. No1, C1, gnd, output after that ctrl, p, this makes me wonder how to wire this up as my back panel is completely different
Sounds like you might be using a OEM product.. That is also how mine is setup as well.. So here is some info about mine. While mine says it is a 2 alarm out I only have one so I keep 2 turned off. Then for what ever reason the CTRL and P is a 13vdc output. If you use a multi meter you will see that if you put your Red lead in the CTRL or P and then the black lead in the Ground next to the P it will register a 13.36Vdc in both areas... My Dahua system with Alarms are done right. However my Dahua DVR's with alarms have 8 inputs and 4 outputs..
@@revo2maxx thank you for your info. Thats exactly im doing after reading the manual and asked the seller which was not really helping. Your info confirm me thanks alot.
As per the manual for the 42xx series NVR, the CTRL is a 12v trigger supply to operate any external alarm relays you may have (close gate/electrify fence). I'm a bit disappointed because I looked up the specs and only bought it because it said 2 alarm outputs. It does not state what the P is for and I don't have a multimeter handy. So not risking connections to those ports.
Excelente contenido, muy claro y práctico! muchas gracias por la información!!
As per accident I've found your
videos as I struggle a bit with my recently purchased DAHUA NVR and my 6 cameras brought from overseas.
You explain exactly these detailed features which is so essential to know to enable me to install further functionals to come close to the picture what a CCTV has to be able to when I did make my research in the market & products.
Like also to Link extra sirens and may flood lights as shown to my NVR.
Need to do it myself because there's hardly anybody as deep in details here in Mosselbaai!!
Maybe a help for another video would be how to enable Push videos from the DAHUA when the system triggers my perimeter fence/sections.
Couldn't get it working and receive only e-mails BUT need to get a PUSH ALARM VIDEO to my cellphone & tablets 😙🤔
hi, thanks. The IDS Hyyp app does video feed when alarm sensor is activated.
@@ecologicaltime WOW, thank you so much!!!! Will try to get into that story
ALSO need to consider to replaced my old IDS alarm system ,think is 8216 or so,
And find out if I can integrate it into the DAHUA ALARM platform to manage everything with the same software..
Will try DAHUA express, run it on a separate security Intel NUC computer
and maybe TOGETHER with IDS, DAHUA or KERMI ALARM control??🤔
So click on the DMSS in your Phone, then click on the camera you have setup with an IVS rules, then click on the icon top right (6 sided looking thing) then click on Notification, if you have not clicked it to turn it on do so now, Then options will come up show you time settings, Motion Detection, SMD, Intrusion Alarm, TripWire Alarm, Scene Changing, Cam Masking, Disk Alarm, Face Alarm, Temperature Not within, and Other Alarms. (Other alarms, IPC offline, License Plate Recognition, Defocus, Abandoned Object, Missing Object, Fast Moving, Queuing People, Parking Detection, Loitering, Fall, People Standing, Violence, Approaching, People No Error,
Many, many thanks for your very detailed reply!!
@@revo2maxx Many, many thanks for your very detailed reply. This is excellent 👍👍 just discovered your channel due to your reply!!
Recently I have noticed that a LED flashing light connected at the rear green connecting block (first two inputs on the left of the top block) remains on all the times. I can't find what the problem is and why the LED light no longer turns off after Motion detection activation. What is wrong and what do I have to do? I haven't had this problem before. Each time motion is detected the NVR beeps and the LED light will flash and then goes off at the set time given. Also, the notifications on my mobile have stopped when motion detection is being activated. It doesn't make the phone sound a beep, nor leaves a short clip on the phone with an accompanying sound. It says that I don't have an alarm hub, please add one. Where do I look for this Alarm hub? If I attempt to add this Alarm hub, A QR scanned appears. Where do I find a QR code on Dahua NVR? It's stressing me out, as it is a pain in the butt to keep the setting to remain as set. Instead, it seems to disconnect itself. Example. I set it to give me mobile notifications with a sound and withing a few weeks those settings are no longer valid/operating. And I haven't touched anything. Plus, again, some days I get notifications with sound, other days I get it during the day but not at night. As strange as it seems, it only makes things quite stressful. Not only that, but when I get a notification with a beep, the damn thing gives me a notification from 10 minutes to up to half hour later. Which means that if someone broke into my home while I am on my way shopping a few kilometres away, they will have helped themselves for that time, until I get a notification. And by the time a return home in a hurry, they've long gone. How do I fix this problem please? Thanks.
Fantastic video.
Please I checked 'send email' box on video detection but nothing is send to my email. What should I do to activate or enable the feature. Thanks
Always amazed 👏 thanks
dahua dhi-nvr4108hs-4ks2/l doesn't have POE ports. How do I connect to 2 switches. 4 cameras in a switch and 5 in another switch
And thanks for nielce videos
how does this differ from IVS
I got this drowning sound. It’s not clear. What can this problem happen? All the camera sound is drowning. It happen resently. Should I turn the settings sound on and off to reset?
Hi,
If it triggered the siren. How do we disarm the siren. Thank you
I've just realized that the XVR I bought and already installed three months ago isn't what I wanted 😢, especially in this crime country called South Africa. I wish watched videos like this before purchase 😪
the 1st time i've said i'm impressed with a Seth Efrican.
hi sir i need to setup the alarm output in 4216-4KS2/L MODEL PLEASE EXPLAIN
great help thanks
How do I set up MD cell phone notification…………?????
tioc camera alarm and night light do not work at the same time
subscribed done
230V? Wow :0
3 times did not start, but then it worked
Hello i have battery drain my e65 745i 😭
scan the errors using INPA
@@ecologicaltime i also have ista + my common error is ask d8cf and some lm error about headlight level sensors but i dont know how can i do ?
Sir modile number
Great Video that you are offering for some people but the info your adding isn't 100% correct.. When your talking about the Motion Detection of the NVR you say that your setting the Schedule for the Alarm output and that isn't the case your setting the TIme for the Motion and by doing that your system will not detect motion on the times you removed.. You need to be careful what information your adding to people because someone might end up missing something that was important because they removed motion event time and not alarm time.. There are a few things that you saying that isn't 100% other then that it is nice that someone has added the Video.. It is crazy that my OEM for a USA based company has better options then the 4216E-AI that your showing in your video.. One of the things that drives me nuts about naming them same with back numbers like yours 4KS2 I am guessing that model has older FW then my model with a 2020 FW.. I mean yours offers options mine don't like the Scene Change Tab and PIR alarm Tab.. However mine offers 2 Standard IVS rules for any camera connected AI or not I have 3 AI cameras right now and I have 5 AI channels. However I have added 3 channels from my AI DVR and doing this I can add 2 more AI for 7 channels of my 16 right now that are AI with IVS rules
thank you for the explanation. This will help people
solution code E000355_0003 CANON 400I