Mercedes SLK R 171 top hydraulic cylinder refurbish without disassebmling.
ฝัง
- เผยแพร่เมื่อ 27 ก.ย. 2024
- Mercedes SLK R 171
top hydraulic cylinder
refurbish without
disassebmling
Affiliatelinks/Werbelinks with (*) are Affiliate-Links
I only recommend products, i`m convinced and tried by myselve. No additionel costs for you.
* Güde Kompressor Airpower 180/08
amzn.to/3QKUzCW
*Dremel 3000 Multifunktionswerkzeug 130W, Set mit 1 Aufsatz, 25 Zubehörteilen, Variable Drehzal 10.000-33.000 U/min
amzn.to/3Ax4jvd
ATE 03.9902-0521.2 Bremszylinderpaste
amzn.to/3dAqQhD
Thanks for sharing this video ❤❤❤❤❤❤❤❤!!!!!!! Also i want to say that you sound very kind with your German accent in English and that is so nice that you made this fix with your friend ❤. I ll try do the same as i have the same issue!!
Hi, so kind, thank you, your post is motivating Have you noticed my new vid, only about to fix the seal? Good luck for your project. Cheers, Axel
th-cam.com/video/ZMAX9qFbnzw/w-d-xo.html
.
My 2006 SLk350 needs the same problem fixed. Thanks for this video. It looks like there is only ONE cylinder that needs to be replaced even though the fluid leaked on BOTH sides of my roof. I agree with the heat thing causing the leak because my roof started leaking during the hottest days of the year. I think I will try and replace my cylinder. Not sure if I also need to add some fluid back though since it leaked several times before I figured out what was wrong.
Fine, good luck with your repair. It's not so difficult. Cheers, Axel
the roof of my 2006 SLK 55 AMG started to retract and it seemed like something was wrong so i pushed the button to close. the trunk did not fold back down and the rear windows did not go back up. and on both sides of my roof fluid started to leak out. i pushed the trunk down but it did not close properly. im told i will need STAR to get the rear windows up. my car is beeping and the screen is flashing red and reads the roof is opening and not locked. will this repair fix my problem? or is there something else?
@@altimorefields2707 at first, put it in the compartment. Maybe there will be a New initialsation. When you mce by Hand you should unscrew the brown plus with the allen to relax the System. Cheers, Axel
@@altimorefields2707 hi, here, in this vid i show you how to close the little side windows. don`t nanipulate the roof without opening the little brown bolt with th inner allen screw. If you can, pls lay the roof in the trunk. Close the rollo/ courtain before and the try to close. May there will be a new initialisation. But don?t forgett to close the little bolt before you push the button. Good luck and cheers, Axel
@@altimorefields2707 you should do what i did in the vid but vice versa. Open the little plug under the roof, Back mirror area, and someone should fix the roof in close position, you go inside with the allen and turn close. there is a micro switch beneath every lock system there. Closing sequence of the little windows and trunk cover will not start before this front lock is closed and the micro switches say ok! Cheers, Axel. Besides, here is my playlist with almost all my cabrio roof vids. th-cam.com/play/PLUaG1Daalhw_xSyMqWNdNqN92JUw4e7YG.html
Awesome thanks for sharing!!!
You're wellcome and Happy New Year 😊
Very good video, Mr. Knoetig - thank you for making it. Did you send the piston to Mr. Moreno to have the seals installed or did you do it yourself?
Hi, first of all, thank you. I think there are 2 possiplities: 1. Replace only the seal, like i showed in the vid. Mr. Moreno would send you the seal and a Tool to pull the piston. Or you buy a complete unit with hoses. Then you need to watch my other vid about complete change. Cheers, Axel
@@corvette724 Excellent, thank you from Canada! Ps, your English is quite good. Don't be ashamed of it :)
@@bobjones3725 thx a lot. Good luck for your project and greetings to Canada.
Hi Mr Knoetig, thank you for the video. I have a question. After you half open the roof and put a wooden chair to support the roof, do you turn off the key ? Or pull out the battery ? I remembered if the roof half open for few minutes, the system to auto shut the roof. Pls advice
@@bryantwbiau if you half open the roof and turn off the key, the ccomputer will automatically open the solenoid valve to release the hydraulic pressure after a short while and the roof will fall forwards again. This is why he put the chair there. You will need to support it in a similar way.
Great video. I did this part, was easy enough. Now, is there an easy way to replace the seals for the rear lift cylinders? Thank you.
You're wellcomme. Position the arrangement in maintaining positionp, read manual or follow my playlist, the other slk vids. Fix it with cushions or what ever. The Rest is normal craftmanship. Order the parts at RSC Company, ask for Mr. Moreno. He's so kind and helpfull. Cheers, Axel
Great video
Thx a lot, you're wellcomme
Thanks
You're wlcome. 😊
Hi Sir, can you share us the video to replace complete hydraulic lock ? Thank you
Hello Bryan, got to my TH-cam site at the search and type: slk. Then you find ALL vids i made obout the slk. If you have more qouestions, feel free to ask.
Cheers, Axel
Hi Mr Knoetiq, first of all thank you for making this helpful video.
May i ask after half open the roof and put in wooden chair support, did you turn off the ignition key Or disconnect the battery ? Because i remembered if leave the roof half open after few minutes the system will auto shut the roof, please advice
Hello, first off all, thx for your like the vid. I Just Turner off the ignition and pulled the key. Tha'ts will be enough in this case. Cheers, Axel
One important thing, open the brown coulored allen screw at the pump when you manual move the roof. And did you know, there is a maintainig position? Cheers, Axel
My slk 280 leaks on the roof. Can you please send me the link to purchase all those to fix? Thank you.
Search at Google for:
rsc autotechnik
Ask for Mr. Moreno. He is very Kind.
Cheers, Axel
who sells the cup seal I am in Australia- you mention a german company?
Googel für RSC Autotechnik. Ask for Mr. Moreno. Tell him you know Mr. Knoeitig. He is shipping worldwide. Cheers, Axel
Hello Mr Knoetig Great video and very helpful it saves a lot of time doing it this way.
Could you please let me know the contact number or website for RSC Company ? is it in Germany?
Thank you
Hello dopomba... first of all, thx. In the editorial u find my e Mail adress and my FB contact. Yes, they are a german Company but ship to everywhere. Next week i upload a vid about some improved work Flow. Cheers, Axel
@@corvette724 I watched the video and realised that you mention the company
I have found it online
Many thanks again all the best