Magpul Mossberg 590A1 Stock & Forend Unboxing & Install
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Unboxing and installing the Magpul SGA Butt Stock and MOE M-LOK Forend on a Mossberg 590A1.
You can purchase these items and help us out by using our affiliate links here:
Mesa Tactical Side Saddle - amzn.to/2RqQUAH
Elzetta Flashlight Mount - amzn.to/3geCzll
MAGLITE XL50 - amzn.to/3dlIEL4
Magpul SGA Butt Stock - amzn.to/2ONBohm
Magpul Forend - magpul.com/catalog/product/view/id/5074/s/moem-lokforend-mossberg590-590a1
You skipped certain parts in your video which makes the video now pointless
i got a 590 chain saw and threw the foreend on it but its super stiff not sure why anyone ?
You got a chain saw for it? Hell yeah!
thanks for this vid, got a 590a1 magpul and had these extra parts had no idea what they were but you identified everything, super thanks, hard to find these answers!
@@fpstina awesome, glad it helped
The thumb strip won’t seat properly on my stock for my 590a1 any pointers?
@@adryanalcaraz9425 if the bolt is screwed all the way in then the strip should just click in. Maybe it’s defective or damaged? I’d reach out to Magpul and see if they would replace.
I’m waiting for my 590A1 to come. It’s already paid for. I got the same furniture. Also the ms1 sling, the inforce wmlx 800 lumen, and the M7 bayonet. I have all the accessories. I have 3 1/2 months left for the gun. Ouch!
Donald Herbold sounds like an awesome setup. Good luck with the wait!
How is it, now that you have had it little bit?
Did you get it yet?🥳
For the life of me I couldn’t get that nut off either wtf I got buy that AR tool to
Figured it out just bought a metal version of that bs plastic thing they give you, also apparently the 590M has the thicker walled barrel so I had to use the other anti rotating ring
Well, I finally got a set of these for the 600AT (“special” Montgomery Ward version) that I inherited from my grandfather, and is older than me. The original stock finally gave up the ghost after nearly 50 years. I did all I could to keep it, for sentimental reasons, but the stock now has too much play in it, for my liking. These guns are built to last, although I did tune it up.
Anyway, we’ll see how they ride.
Yeah these Mossbergs are tanks. Interested to hear how you like the Magpul furniture on it. I've taken mine out a few times since putting them on and definitely feels like an upgrade to me.
Sweet set up man! Nice piece of kit for sure. Just picked up the 590 at a steal in California for 400 new. Which during this time is unheard of. I’ve been looking for the A1 for about a year and just settled with the 590 for now. Later I can always sale it and pick up an A1. Will be changing stock and forend to magpul as soon as it gets here. Thanks for the tip about the magpul nut tool given. I purchased a shockwave tool from amazon just in case it breaks.
Allen Aguiar Thanks! And a 590 for $400 is an awesome deal, nice!
Where did you get the light mount?
@@bluesbondsman amzn.to/3geCzll
Might have been a good idea to show actual removal and install of the forearm and the stock for beginners'.
Yeah my setup for the video was pretty bad when I shot this so I was all over the place. Might have to redo that part.
Love the Mossberg pump guns, and Magpul furniture
They do go well together.
Great Video...
Thanks
That the ultimate self defense pump shotgun u can't do no better that's my opinion anyhow
Thank you! The 590A1 is a beast of a platform. Everything else is just icing.
Nice looking street howitzer!
Thanks!
Digging the red lens on your light. Does that show enough in a dark room?
Che, Capo thanks and yes it gives off enough light for a dark room.
I laughed because everyone that owns a 590A1 has to get that screw driver! Good vid showing of the FDE.
Tim Sanborn Haha yeah that screwdriver has one use in my house.
Actually on mine. a socket wrench with a long extension is needed
Nelson R good to know!
Mine has a flat slot built into a bolt head. I used a 1/2 in extended socket instead of the screw driver. Besides, no man should ever bitch about buying a useful tool. Those long drivers are great for replacing auto belts and such. Lil' bit of a "nancy boy" in this video. So much for "GRIT".
Would I need that screw driver for the mossberg 500?
Let's get to the dark side without hesitation. With this stock, which everyone seems to like so much, you cannot get the trigger assembly out, or get it back into the gun during takedown, without loosening up the stock quite a bit. This requires more time and an additional hex wrench. Whereas with normal takedown you do not need any additional tools. I like my Magpul stock, but this is really a stupid design flaw!
Fully agree that this is a big design flaw. Overall I'm still happy with the handling and aesthetics, but dread breaking it down for cleaning.
Hey brother I’m building up my 590a1 set up now. What flashlight mount you got on yours? I used a monstrom on my benelli m4 and it works great, just in the market for something new!
Hey, I made a video on my flashlight setup for this build. Pretty happy with it so far.
th-cam.com/video/jghExr83AUk/w-d-xo.htmlsi=4l1SyDrGdcEKyVib
Crap instructional video. I had to watch through the unboxing etc,
And then the video cut out for the part I had actually clicked to watch, (how to take off the old forward stock, and put on the new).
I cut the best part to save it for later...
Does your fore end wiggle a little play when it’s fully forward?
It does. I don’t recall if it did that with the stock forend also or if it’s unique to the Magpul one.
The reason for the insert at the stock / receiver is because you can install an optional metal ring for a sling there.
Thanks for the info
Are u running a magazine extension if so what kind
Jason and Summer no it’s just the standard tube on the 590a1, which holds 8 shells (2.5 inch)
Greet video, thanks! Just got the Mossberg this week and tried to swap the forend out, but the castle nut isn’t budging with the Magpul tool. Would putting a few rounds cycle some heat through and help? Or is it just because of the Magpul tool? Other videos make it seems like it should take almost no effort to unthread it. Any advice?
Tim Kong its a combo of the castle but being on there pretty tight and not being able to get enough leverage with the Magpul tool (and the teeth eventually broke on me). A castle but wrench will give you a lot more leverage. You could try spraying WD-40 or some kind of penetration oil on the castle nut and let it soak for a bit before trying. Good luck and hope it works out.
Thanks! I borrowed an AR tool from a buddy. Was it easy once using that tool?
Tim Kong yeah it was way easier with the AR tool, but I’d still suggest soaking the castle nut in some WD-40 or something to help
@@UnprofessionalOutdoors Appreciate your advice--the AR tool worked like a charm!
Tim Kong nice! We’re constantly making new videos so subscribe and share if you don’t mind.
Mine has a flat slot built into a bolt head. I used a 1/2 in extended socket instead of the screw driver. Besides, no man should ever bitch about buying a useful tool. Those long drivers are great for replacing auto belts and such. Lil' bit of a "nancy boy" in this video. So much for "GRIT".
One time I broke a nail using that screwdriver and it made me cry. Since then we haven’t been friends.
Someone help me I wana buy this but the magpul website is out of stock and there is a website that has it but idk if its gonna be legit and have the stuff like the bolts and tools.....Theres like 40 reviews should i get it?
What is the website?
Hey man, how did you put the sling swivel mount on the back of the stock at the bottom? My buddy just got this stock and I’d love to be able to put a sling mount there.
I drilled a hole in the bottom and then screwed the swivel mount into it. I forget the bit size, but I did go smaller than the swivel so the threads on the swivel had more to anchor into.
Thanks man! How has it held up? Has it loosened at all?
@@n.papageorgio5135 I only had it on there for a few months and ended up removing it because I wanted a QD sling setup. I did a video on my current sling setup, which I’m way happier with.
th-cam.com/video/fFzBZ9STbdI/w-d-xo.html
What kind of saddle do I have on it?
kiLLjoy24CALI Mesa tactical. A link to what I have is in the description.
What about this is a “backpacker“?? Looks like just a regular SGA stock and forend to me.
Whoops, I made this video this video at the same time I made the 10/22 Magpul Backpacker video also on the channel. Thanks for catching this, I updated the title.
What if my mossberg 590 has a heat shield? Will the magpul still fit?
You might want to reach out to Magpul. There is some clearance but not sure if it’s enough to clear a heat shield.
What Is the mount for the flashlight??,
Elzetta amzn.to/3geCzll
I don't see what the issue was.
Mine was super easy.
What was easy, removing the castle nut?
Nice video? I have this video was two years old, but I’m hoping someone might be able to help me. I have the exact same set up, but I was unable to get the forend on forend off down to get the castle nut to grab. Any suggestions
Were you able to get it off? An AR tool helped me out.
@@UnprofessionalOutdoors yes. I had to modify the forend by removing some material so it would allow the castle nut to grab.
@@2137Reap Good to hear you got it sorted out.
Will this work for the youth mavrick 88
Not sure. Looks like there are some folks online that have, but not sure if they had to do and mods to make it work. I would check with Magpul to be safe.
Do you know if the forend will fit on a 590 20ga?
I don’t think so since Magpul’s site specifically says 12 gauge, but you might want to check with them.
What side saddle do you use?
Mesa Tactical
What light are you using..
It's a MagLite XL50.
What kind of light/mount is that?
It’s an Elzetta light mount with a Maglite XL50. I made a vid on that setup th-cam.com/video/jghExr83AUk/w-d-xo.html
Does the Forend fit the maverick 88?
Don’t think so. Looking at the Magpul site it looks like it’s only for the 590/590a1
magpul.com/moem-lokforend-mossberg590-590a1.html?mp_global_color=118
@@UnprofessionalOutdoors Ya you're right. After a little more research I see I need the action slide tube from a 500 to make this work on an 88.
any specific budget lights you recommend?
I did a video on my light setup for this which is not expensive. Elzetta light mount and Maglite XL50.
th-cam.com/video/jghExr83AUk/w-d-xo.html
@@UnprofessionalOutdoors thank you sir
Awesome video. Thinking of installing the same butt and forend. What is the total length from tip to buttstock?
Literally skipped over the only step i needed
What part was skipped?
@@UnprofessionalOutdoors i was trying to see the action slide tube removed from the OG handguard.
Nice job. Looks great.
Thanks!
Great Review. New Sub.
ATUMRE MOOR OUTDOORS awesome thanks!
Can you tell me the overall length with the magpul butt stock
Hugo Padilla it’s 12.5” with none of the spacers. Each spacer is 0.5” and it can go up to 14.5”.
@@devinbreeding5412 entire shotgun with magpul please my arms aren't that long
@@devinbreeding5412 ok cool thank u so much man I appreciate it
The shells in the shell holder go in from the bottom not the top.
Ronald Patton this is an interesting topic. I’ve taken 2 tactical shotgun courses that had different approaches.
The first had shells in from the bottom. All the trainers were civilians with NRA certification. It was easier to take the shells out, but there were a few people that fumbled shells. Also some shells would work their way out of carriers with aggressive handling.
The second course was with active law enforcement some of which were ex-military. They had shells in from the top. Harder to manipulate, but no fumbling and shells did not work out of carriers.
Both have pros and cons.
It's a matter of preference fool. Especially if you are a lefty - fool! Be quiet as you people piss me off.
Get a life couch commando. I am sick of your pathetic comments.
Interesting!
Glad you think so!
Can you do a video on the light mount (+install) and the light you’re using? 🙏
Also - what’s the reason for the red cover on the light? Low light?
J. A. I’m actually working on a video that covers this and a few other weapon lights I have. Subscribe to the channel and you’ll get a notif when it’s up.
The red cover is for low light and hog hunting since they can’t see red or green light.
The Grit Republic thanks man. I’ll sub for sure. Look forward to the video!
J. A. Finally got the new video up, sorry about the delay
If you need a video on how to "install" a light then please stay away from firearms - son.
@@cuttheknot4781 that's fairly mean as indont get the point, just because of terminology or whatever else, that is one lame comment just because some asked...smh
Omg that thing is beautiful my friend
And that screwdriver is freaking huge wtf hahaha
@@johnvu6560 haha yeah it is. Those screws are pretty deep in the stock, had to find that thing at an auto store.
Did you have any problem with the threading for the nut that holds the forend? When I took off the standard forend to put on the magpul forend, the threads on the shotgun were peeling off. I hope it was just the paint/finish and not the actual thread. I am too afraid to take off the forend to take a better look.
No I didn’t have a problem with the threads once I was able to actually get the castle nut loose. Did it actually screw on when you replaced it? I’d look into if the threads were damaged or not. Wouldn’t want that coming loose when operating the shotgun...
@@UnprofessionalOutdoors It definitely fastened. And so far i haven't noticed anything unusual. I test racked it PLENTY.
@@UnprofessionalOutdoors thank you for your feedback. I am trying to get a hold of Mossberg and see if I can have a replacement part sent to me. 🤞just in case.
Thanks again
@@Hamrik_Oswald anytime and good luck with Mossberg.
@@UnprofessionalOutdoors hey bud, me again. So after taking a deep breath and taking a second look at my slide action tube/forend threading, it appears that the material that was peeling is some sort of factory finish. Maybe coagulated/hardened grease - definitely some form of filament that held the impression of the threading. I peeled it off an the threading was still there intact.
It's making the OCD part of my brain fire like a mutha though. Not sure if I should brush the rest off or not.
Nice
Thanks!
Did u buy a heat shield yet for it?
Frankie that was one of the first upgrades I bought for it, but the thickness of the A1 barrel prevented me from getting it on.
@@UnprofessionalOutdoors yeah, they make specific ones for the A1 but last I checked they were out of stock. Not sure a heat shield will work with that particular grip though?
Che, Capo Yeah don’t think a heat shield would work with the grip, plus I like the look and weight of my current setup.
@@UnprofessionalOutdoors right, I think it's too tall, if that makes sense. Nice setup. I particularly like the angle of the buttstock grip on these. Super comfortable.
Yet? As in it's needed? No one needs a heat shield son. If the military does not use them why would you
what side saddle is that?
I have this one from Mesa Tactical www.mesatactical.com/products/sureshell-aluminum-carrier-for-moss-500-590a1-mav88-6-shell-12-ga.html
@@UnprofessionalOutdoors How do you like it, and are the rounds easy to remove?
@@Marz916 overall it’s solid. Keeps the rounds in place well and they are easy to remove. Only complaint is that the attachment screws strip way too easy. Mesa Tactical is great and they send replacements, but I’ve had to get replacements twice so far.
Thanks for the info. And the video.
What sights are those?
They are ghost ring sights that came mounted on it when I bought it. Mossberg does sell them but they do require does drilling so you might need a gunsmith for them.
www.amazon.com/gp/product/B0002INJSA/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=gritrepubli06-20&creative=9325&linkCode=as2&creativeASIN=B0002INJSA&linkId=181130e41a5217203cd7ea7d7bf56df6
@@UnprofessionalOutdoors oh ok thanks! I decided to install the XS Big Dot sight on the front and leave the rear alone
@@joseostorva7235 nice! Have you used it yet? Interested to hear how it is.
@@UnprofessionalOutdoors I haven't even fired a shot yet 😅 just got my 590A1 the Tuesday that past
@@joseostorva7235 gotcha, well have fun. It’s a great gun.
Does the magpul make the weapon feel any lighter? Is it some type of polymer? I have a 590A1.
Side note, wish i coild have aheat shield on mine but from what i can tell the thicker barrel makes it impossible to get a heat shield on it.
Super it is a polymer and it’s light but sturdy. It does make the front of the gun feel heavier with the light stock and heavy barrel, but nothing unmanageable or unbalanced.
Yeah a heat shield would look awesome, but can’t get one to fit with the heavy barrel.
Yeah, it's a helium filled polymer
bad camerawork
I think the camera work is just fine
Thanks! Some of the head-cam was a little shaky. Was trying out a GoPro with a new head rig.
Thanks a lot for sharing. Will this Magpul forearm fit other 12ga shotguns? I am new to pump action guns and just recently purchased one made by one of the Turkish manufacturers.
Glad you liked the video. Not sure if it will fit other shotguns since Magpul does also make one for the Remington 870. The Magpul forend has to fit to the barrel, magazine tube, castle nut, and slide action assembly.
Can you out the aim tech tri rail on that? Or the quad rail or it won't work with magput forend?
The Magpul forend is pretty high on the barrel and there isn’t a ton of space between the forend and barrel. Might be a little tight trying to add a tri or quad rail.
@@UnprofessionalOutdoors thanks...deciding hardware whenever I get that gun..if I can ever get that gun.
@@facebookmakesmesick yeah it’s hard finding anything these days.