DIY Pallet Wood Picture Frame
ฝัง
- เผยแพร่เมื่อ 2 ม.ค. 2020
- I needed picture frames, I have pallets, this was bound to happen! My take on making some very simple picture frames with wood reclaimed from pallets. The design is as simple as it can be and also a bit rustic, or so I tell myself to justify some minor gaps here and there!
I made these picture frames 50x60cm to fit arts that I wanted to frame. The outer frame made with 5cm wide strips and the inner frame is 4cm wide. Lucky for me I also had some old glass for free so that's recycled as well taking the cost for these three down to only 3-4€ as I bought hangers, rubber feets and cream colored cardboard for the backing.
Of course I need to point out I just started to play with wood in this scale, I have very little woodworking knowledge, so take everything you see just as entertainment. Thank you!
I just started to list some of the stuff I use for my projects in this amazon storefront:
www.amazon.com/shop/blackbear...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Index of operation and materials:
0:10 Cut the pallet with circular saw, I tried to disasseble to save those three blue pieces but it was not coming, those nais are just too thick and deep! I tried and the wood started to break before it came apart!
0:36 Drive the nail down with a punch, not very effective but it worked for the most part (1:07 not here...)
1:25 Nails are easy to remove at this point
1:43 Rip boards on the table saw
3:10 Clean strips with orbital sander and low grit sandpaper, like 80
3:50 Mark cuts with speed square
4:00 Cut with hand saw, longer pieces don't fit well through my small band saw the way is mounted now
4:36 Mark and cut 45° on the outer frame
5:20 Sand the 45° on the belt grinder to make sure it's real 45°
6:00 Wood glue and clamp with strap corner clamp
6:20 Hold the square in place with a couple stapes in the back
6:32 Then secure it for good with nails
6:50 Mark and cut 45° for the inner frame
7:40 Offset the inner frame in the middle of the outer frame, gives a layer for the front aesthetics and space for glass and backing
7:50 Nail the inner frame to the outer
8:25 Furniture wax as finish, does not make the wood all that yellow, it maches my desk better
9:04 Cutting glass with eye protection
10:00 MDF like material for the back, just some sort of thin pressed material I had
10:34 Picture frame hardware
10:58 Random rubber pads I found for cheap
11:22 At the end I used small screws rather than nails, easier to take apart if I need to.
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - แนวปฏิบัติและการใช้ชีวิต
Cutting glass is easy when you follow the 'rules': make one pass with the cutter only. You may want to wet the glass with mineral spirits first. Do not push too hard on the cutting wheel, you should hear it 'sing' while it cuts. To always ensure a clean break, just push on both sides of the cut at one edge of the glass panel only, never (!) push in the middle of the panel.
I love these recycling pallet videos. 👍
They don't even need pictures in them,they look that good!!
I love salvaging materials from all over!! Great use of those pallets!! Definitely keeps project costs down!! Great work!
Great look 🖼
Very nice. I like building out of pallet wood, but never thought about picture frames. They turned out great.
Black Beard, you are so talented. You can do anything. Nice job!
I feel in love with your channel the day I first saw your Wallet DIY video.... great video. Thanks. You are an inspiration....
great job I will make one too. Love staple idea of holding corners together. Impressed
Really unusual techniques on frame making... I am down at the belt sander mitering... Very nice!
Just watching the saw cutting at time 1:45 is therapeutic/zen. Love this video, straight and to the point. Very Nice!
Thumbs all the way up 👏 on the fast forward look and sound
Nice. I've got a large mirror i want to reframe. This has given me enough information to give it a go.
Thanks! Great project for a beginner like me. And I need a couple of nice picture frames like this.
Awesome pallet wooden frame !!!!!!!!!!!!!!!!!!!!!
Very cool and very easy! Great stuff as always!!
They came out cool! Congrats!
Sounds were satisfying! Great work!
I like the pics you choose, very minimalist! :D Sei un grande!
Good job man, I admire you, congratulations. Greetings from Culiacán, Sinaloa, México
Thanks again!!! Nice frames.
My grandparents had a frame shop. I was in the shop a lot the first part of my life. I use to make frames as a youngster. That’s probably why became a finish carpenter in my early 20s. A chip saw would be a wise investment. You did your miters the way I did them as a kid. 👍. Nice job on the project. Is there anything you don’t do 😂
This is a great idea!
Tip for cutting glass, after scribing the top, try tapping with the handle of the cutter underneath at the ends of the cut before snapping off.
I love the pictures especially!
OOOOOOFf, rubbing stain into pallet wood with your bare hands. thats a real man right there!
i wasn't convinced til the very end, but they turned out lovely. nice job dude!
DMonZ1988 I felt the thingis getting under my nails -.-
I’m thinking “why the hell would you make anything out of pallet wood?”
After the stain I’m thinking “oh that does look noice....”
Great hand saw 👏
Great idea. Thanks from México.
Loved the video, I would love to see more pallet ideas.
Amei seu trabalho, simples e bonito. Parabéns!
These came out really well, we would love to make something like this ourselves :) We've been braking down pallets and it's no easy task. Nice work!
Very nice. I made similar frames from pallet wood myself this past summer.
E' incredibile constatare che per realizzare un video del genere oltre al lavoro di montaggio, ci sia realmente del duro lavoro e, nonostante queste tue fatiche, il risultato sia di una rilassatezza indescrivibile. Te lo dice uno che non sa nemmeno attaccare un chiodo al muro. Eppure una grappetta alla Tua salute è scesa giù orgogliosa per ciò che condividi. Rinnovo i miei complimenti. Un abbraccio
Hi, I really like your channel because it really show that with some decent cheap tools (Parksides ones) and some skills, you can do awesome stuff!
Of course your business is crazy I enjoy watching😍👍🏻👍🏻
Nice work. I am planning to teach my photography class how to make their own frames and this will be compulsory viewing.
Those look very nice. Good job.
A long time ago, I have been following you and love your work from Iraq😍❤️
..looks great, nice work..
When cuting glass, score once, tap gently underside along the score, break should be clean all the way ;)
Good idea. In my first attempt to peal the wood so stressful ... After seeing some video i got an idea only puncher and hammer to do it more easier. I managed to transform 1 pallet 3 level shoes rack in 30 minutes. I love this idea. Keep a good work man.
wohoo! the weekend can start! Paul Jackman would approve! 😁
Ahaha!! Cheers brother!
Reclaimed pallet furniture and home decor is the rage just now.
Amazing work brother.
Nice work and smart way to get good 45 degree angles.
Nice, I like rustic! 👍
Jeeeez that is the NICEST pallet I have ever seen.
dakaraius I have to agree on that one.. they are hard to get where I live and extremely expensive..
Thomas Lohr where do you live? Here in UK, they are everywhere. Good condition too and mostly free.
@@wac36 Agreed. They are everywhere here in the UK and free. But they are never it that nice a condition.
wac36 Austria, most companies hoard them like a treasure because they only get like for like here and they have to buy new ones if they don’t trade in their old ones, I’m told..
Three rare photographs of polar bears in a snow storm. Nice!
sickan98 🐒 👍🏼
Good 1
You got me there...
I was like there's no polar bears... took me a bit.
😂
Most awaited from India 😃
Well done!
I am working all the day with pallets 😉
So talented!
Great job)👍😉
Excellent work sir
0 views 37 likes
Me:ok it’s perfect
no need to see it to like it amirite
Well done, nice project. Scoring glass twice usually ends in those non uniformed breaks, better to maintain a single score breaking from the edge you started from provided you've given a constant pressure which will give you the cleanest break.
Double scoring also tends to nick up the cutter's wheel which causes skipping on future cuts
I was wincing when I saw him scoring twice!
I see you finally found a use for that ice pick........ :)
Excellent video and process. Thanks for sharing. Sometimes I use Shellac as a finish. It is predictable and easy to maintain.
Perfect!!!
Excellent work👍👍👍. Thanks for sharing. You pulled it off. I try to do it is ugly
Cool I watched the entire video and it amazed me
Nice work 😍
Awesome job. Congrats! From Santo Domingo.
Beautiful
GRACIAS POR EL VÍDEO Y APORTE, OTRA COSA QUE NO SABIA BUENA DECORACIÓN UN SALUDO.....
Great job 🤝
Love it!
Very RUSTIC, I likey :)
He sure does things quickly
Nice video! If you use a sabre saw to cut the nails, the wood will come out nicely.
Interesting pallet destruction method. 😮
Good job I like it
Only make ONE pass with the glass cutter, then tap along the underside of the cut prior to breaking ... this avoids those incomplete cracks.
2 passes creates extra chips that causes those unwanted curved cracks.
Awesome, dude
Great job, the only complaint is the nails in the back, maybe a better solution for easier rear opening. Greeting
Astonished
Wowww very beautiful 🥰❣💝💫
Get yourself: wide, flat chisel, hammer, reciprocating saw, flat crowbar... Easiest way to dismantle a pallet. Use flat chisel to knock between where the nails are, clearing space for reciprocating saw, then just blast through all the nails ( using a multi purpose blade ) quick, fast, no mess, no fuss, well, still a bit of a mission. Thanks for the enjoyable content and all the best for 2020! ;)
So cool😀
Well done sir
Very nice 👍🏼✌🏼🖖🏼
Very Nice Project My Friend👍
Amazing
Good Work, bye bye...Wellington - Brazil
great idea.
All this work for 3 frames With invisible pictures? Mmmm 🤔 Sweet!
Happy New year!!! This video is awesome! Only one little double question : whats is the wax furniture's name and it is possible to get it to France, please?
Thanks a lot!!
Very nice my Brother I love it,Good job and Have a awesome New Years much love Family later :)
Nice very much!
I can really appreciate the carpentry that went into this. But it is just a build of picture frames made from scrapwood
Yes! Yesss! That’s what all art museums needs! Something new, something you never seen in a museum before, something blaaaaaaank!
👁👁🤔👀😐😑_😂
I’ve been doing mitre cuts wrong my whole life. I’m putting my chop saw on eBay.
Bello anche a me piace il bianco!
Hello 👋 my Lovely 😊 very Good very nice 👍 your working and your video Beautiful I Love ❤️ you and I Love ❤️ your channel thanks so much my friend Goodbye 👋 next video 🌹❤️
Damn that’s a lot of work for frames , I like pics on my phone
Ju
Tra me e te abbiamo garantito lo stipendio ai commessi della Lidl...
Anche tu sei uno spancalatore... Op op op op oppa!
I'm rather surprised you got as good wood as you did outta those pallets... :)
Darling love that minimalist aesthetic
The poetic emptiness of the defined space it’s so 2020
:0)
Талантливый парень, молодец!!!
Я думал он фрезер достанет....
Ну ладно, без фрезера, но обработка поверхностей, скобы и гвозди в углах - жесть реальная!
Нах... он гвозди вообще доставал? Загнул бы просто.