All great points. Well covered. Iv'e owned a Wood-Mizer LT 40 years ago and now an LT 50 and I'm still learning! There is no better teacher than experience and listening to other folks.
I don’t know why I never thought about the issue with starting the log on the smaller end and the direction of the branch growth affecting the deflection of the blade. I’ve managed to work out a lot of kinks on our Norwood HD 36 and we run a good wood, Mizer blade, and cut for Damily hardwoods, but cutting some of those pine with all those branches usually made our boards look like a roller coaster. Going to give your technique a try. Thanks.
Good job. A few of my tips, More set uses more horse power and makes more sawdust, When turning large cants don't drop them, Some cants have a lot of stress and bend when cut, if your lumber is thick and thin turn the cant over more often. If you have enough Horse power the blade will be happy and sing when the cut speed is much faster than what your cutting now. Blow off the mill every day, saw dust will hold moisture and cause rust. ATF is the best lube for everything except ball bearings, sawdust wont stick to ATF like the motor oil. Don't coil sharp blades.
Thanks Thomas for a great approach to ensuring the best sawing experience. Nothing is more frustrating to me than sawing WAVY lumber! My nemesis is white oak. And, for those sappy woods, maybe a future video on diesel drip would be helpful. Thanks again!
Great tips! Thanks, Thomas. I cut Honey Locust and Black Walnut and they are unforgiving if your mill isn't set up correctly. Blade tension and going too fast seem to be the biggest factors for my mill (if everything else is right).
My 1620 was delivered last week. The awswome Delivery man used a 4 ft level ,then I tweaked it with a 6 ft level but it didn't look right so inset up 2 different Topcon laser levels and it was 1 1/4" out of level using a 6 ft level, front to back
good video. most of the good sawmiller use diesel as wipe or dip it is better for the blade and little cheaper because you can saw saw 6 times as much as you can with washer fluid at $2.99 a gal. your video will help a lot of new people. take care, be safe and well happy thanksgiving how is mr. Roberts doing?
Great video i have been sawing for 6 years now and have experienced everything you mentioned. I learned some stuff here and think this will help many mill owners. Curious where you bought the clamp on dial indicator.
Levels an string lines are not sufficient for leveling definitely need solid base as you say get a nice optical level or barrow one from buddy can’t go wrong it’s very precise for setting up mill
Many band sawmill operators in real winter climates use windshield washer fluid in their lube tanks. Diesel is rather pricey to be using as a lubricant despite it being great a preventing build up on your blades.
Out here on the Left Coast 95682 Diesel is $6 bucks per gallon. If it's cold enough to freeze I stay inside. My lube has a pump and sprays both sides of the blade, 5 gal a day on pine.
i have a range road it’s bang on level on concrete and i can never cut the same board twice it’s all over the place ready to take a sledge hammer to it tried it all
@kristopherfrootloops6714 it holds up great. I'm in clay. I used 2' soni tubes (10" dia). Stayed 6" above the soil. Actually, i dug down so that i could roll the logs onto the track. I also used some vertically adjustable levelers set into pvc pipe set into the concrete. I'd be happy to send some pics. It's really simple. It's been holding up for over 3 years. I will set up another set of tracks near my cabin in Idaho in the next 3 weeks.
I bought a mill cause my granddad built all the barns and structures out of timber harvested off the farm and now I need to fix some buildings,buld more, so I bought a mill
Because I take the whole stack off at once with my tractor. I work alone most of the time, so any time I can reduce touch time, I do. If I had my sawmill set up in a different location, I could use the drag back, but that involves more handling of the boards later. Also, if I'm cutting a customer's log, I don't sticker and stack their wood unless they pay me to do it. By keeping the cut boards as a full stack, it helps to easily load their trailer when the job is done.
Not necessarily, but as a blade loses set, it's more likely to travel in the log. If more set is added then more power is required. If you're cutting softwood, more set means you can run the blade longer before it loses the set. I would not suggest adding additional set to cut hardwood. The added stress on the blade may be counterproductive. For the best cut quality, I like to set to 0.022" .
Excellent video buddy, everything looks great 👍, design build a are the best! Debarker owner's, pung system after milling in cold , yes change bands more often than not!🌲🪵💪💪💪👍🧡🧡🧡
Where did you get your complete knowledge of every single part on the sawmill. You are describing in detail about everything. Where did you get your knowledge of the TimberKing sawmill.
![[TH] 2024 PMSL SEA Finals D2 | Fall | ต้องรักษาฟอร์ม อย่ายอมให้ใครแซง](http://i.ytimg.com/vi/x38QsGn7A3M/mqdefault.jpg)
Thank you for this information and video. I've never had a mill nor been around it. Jumping in feet first as a hobby
All great points. Well covered. Iv'e owned a Wood-Mizer LT 40 years ago and now an LT 50 and I'm still learning! There is no better teacher than experience and listening to other folks.
One of your best instruction videos.
Concur on use of diesel. Believe the diesel drip works better than anything else, at least on our new TK 2020.
Thank you. It's convenient since I already run diesel in all my equipment. Also with only a drip every second or so it lasts for a very long time.
Really great video, Thomas. Very much appreciated. When it comes to sharing there’s not a single thing more valuable than well considered experience.
Gary Atkinson
Eric🎉u😮pll😅
Thanks for the video very detailed.
I don’t know why I never thought about the issue with starting the log on the smaller end and the direction of the branch growth affecting the deflection of the blade. I’ve managed to work out a lot of kinks on our Norwood HD 36 and we run a good wood, Mizer blade, and cut for Damily hardwoods, but cutting some of those pine with all those branches usually made our boards look like a roller coaster. Going to give your technique a try. Thanks.
Sounds great. I hope it helps out.
Thank you for your experience!
Very helpful!
Good job. A few of my tips, More set uses more horse power and makes more sawdust, When turning large cants don't drop them, Some cants have a lot of stress and bend when cut, if your lumber is thick and thin turn the cant over more often. If you have enough Horse power the blade will be happy and sing when the cut speed is much faster than what your cutting now. Blow off the mill every day, saw dust will hold moisture and cause rust. ATF is the best lube for everything except ball bearings, sawdust wont stick to ATF like the motor oil. Don't coil sharp blades.
Thanks Thomas for a great approach to ensuring the best sawing experience. Nothing is more frustrating to me than sawing WAVY lumber! My nemesis is white oak. And, for those sappy woods, maybe a future video on diesel drip would be helpful. Thanks again!
Thank you for the kind words. White oak is definitely hard, but quarter sawn it's absolutely beautiful.
White oak is definitely my least favorite also! At least for what’s native here.
-Poultry Punx Game Farm (and mill) Clarksville, Tn
Great tips! Thanks, Thomas. I cut Honey Locust and Black Walnut and they are unforgiving if your mill isn't set up correctly. Blade tension and going too fast seem to be the biggest factors for my mill (if everything else is right).
Glad you enjoyed the video. Hardwoods can be tricky, they are heavy, hard and if they have large knots that adds a whole new level of difficulty.
My 1620 was delivered last week. The awswome Delivery man used a 4 ft level ,then I tweaked it with a 6 ft level but it didn't look right so inset up 2 different Topcon laser levels and it was 1 1/4" out of level using a 6 ft level, front to back
Thank you, I appreciate the information.
Great vid, thanks for sharing.
Thank you sir, very informative, new sawyer here and i benefited greatly. Subscribed
good video. most of the good sawmiller use diesel as wipe or dip it is better for the blade and little cheaper because you can saw saw 6 times as much as you can with washer fluid at $2.99 a gal. your video will help a lot of new people. take care, be safe and well happy thanksgiving how is mr. Roberts doing?
Thanks and Mr. Robert is doing well down in Mississippi. We talk weekly and are planning a meet up and video this winter.
Sawyer not sawmiller
About the most informative sawing video I've come across, thank you for putting it together.
That was an excellent video.
Thank you
Do any mills have a brush system to keep dust from building up on the wheels?
Great video.
Thank you
Great video i have been sawing for 6 years now and have experienced everything you mentioned.
I learned some stuff here and think this will help many mill owners.
Curious where you bought the clamp on dial indicator.
I'm going to be asking a lot of questions. How fast should I drip fluid on the blade
Levels an string lines are not sufficient for leveling definitely need solid base as you say get a nice optical level or barrow one from buddy can’t go wrong it’s very precise for setting up mill
Hello Mate , do you think , you have to clean off , build up, of surface dust, more often than not
thanks...good vedio
Glad you enjoyed it
I don’t normally comment, but great video !
Thanks
Can you make video about how to fix your sawmill going up words as you cut
How much diesel you are using with water or just a diesel to lubricate blade?
I see this is a 4 post mill. I wonder about the cantilevered mills, if they have more of a tendency to deflect when you hit a hard spot or knot.
Great info.
Many band sawmill operators in real winter climates use windshield washer fluid in their lube tanks. Diesel is rather pricey to be using as a lubricant despite it being great a preventing build up on your blades.
Yes I agree diesel is expensive, but I'm only using a drop or 2 per second.
I use diesel too, I get about 30 hours out of 5 gal. At a drip every couple seconds. Way cheaper than washer fluid in my experience.
Exactly
Out here on the Left Coast 95682 Diesel is $6 bucks per gallon. If it's cold enough to freeze I stay inside. My lube has a pump and sprays both sides of the blade, 5 gal a day on pine.
i have a range road it’s bang on level on concrete and i can never cut the same board twice it’s all over the place ready to take a sledge hammer to it tried it all
i may get 2 8” logs sawed decent and then it’s starts going all over the place
I put in 10" concrete piers. Its very stable.
How deep did you go?
How are they holding up?
I was thinking about doing this too.
Thanks!
@kristopherfrootloops6714 it holds up great. I'm in clay. I used 2' soni tubes (10" dia). Stayed 6" above the soil. Actually, i dug down so that i could roll the logs onto the track. I also used some vertically adjustable levelers set into pvc pipe set into the concrete. I'd be happy to send some pics. It's really simple. It's been holding up for over 3 years. I will set up another set of tracks near my cabin in Idaho in the next 3 weeks.
I bought a mill cause my granddad built all the barns and structures out of timber harvested off the farm and now I need to fix some buildings,buld more, so I bought a mill
The drilled holes in your blade wheel. Are they there to balance the wheel when turning?
Yes, used for balancing. The wheel is spinning around 55mph while cutting.
Try windshield fluid over the diesel
Why do you leave the previous cut pieces on the log while cutting subsequent planks?
Because I take the whole stack off at once with my tractor. I work alone most of the time, so any time I can reduce touch time, I do. If I had my sawmill set up in a different location, I could use the drag back, but that involves more handling of the boards later. Also, if I'm cutting a customer's log, I don't sticker and stack their wood unless they pay me to do it. By keeping the cut boards as a full stack, it helps to easily load their trailer when the job is done.
👍🏻👍🏻👍🏻👍🏻👍🏻thank you
Why did you move from Mississippi to Wisconsin? Do you prefer cold weather?
In the military so we move a lot
Will more set in the blade reduce waviness?
Not necessarily, but as a blade loses set, it's more likely to travel in the log. If more set is added then more power is required. If you're cutting softwood, more set means you can run the blade longer before it loses the set. I would not suggest adding additional set to cut hardwood. The added stress on the blade may be counterproductive. For the best cut quality, I like to set to 0.022" .
Use a long mason's level
Where in wi are you located
Porterfield Wisconsin
Excellent video buddy, everything looks great 👍, design build a are the best!
Debarker owner's, pung system after milling in cold , yes change bands more often than not!🌲🪵💪💪💪👍🧡🧡🧡
Where did you get your complete knowledge of every single part on the sawmill.
You are describing in detail about everything.
Where did you get your knowledge of the TimberKing sawmill.
I've run a sawmill since 2003 and have owned 8 different sawmills and operated many more along the way. I love sawmills and cutting wood.