How to Replace Front Strut & Spring Assemblies 2003-2007 Honda Accord

Buy Now!
New Strut & Spring Assembly Set from 1AAuto.com 1aau.to/ib/1ASSP00163
This video shows you how to install new front strut & spring assemblies from TRQ on your 2003-2007 Honda Accord. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Pry Bar 1aau.to/oXJ/1AXAA00020
• 17mm Wrench 1aau.to/oZ2/1AXAA00010
• 12mm Socket 1aau.to/obFp/1AXAA00015
• 14mm Socket 1aau.to/obFp/1AXAA00015
• 17mm Socket 1aau.to/obFp/1AXAA00015
• 19mm Socket 1aau.to/oanY/1AXAA00043
• 1/2 Inch Impact Gun 1aau.to/ove/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/obFp/1AXAA00015
• Socket Extensions 1aau.to/obFp/1AXAA00015
• Torque Wrench 1aau.to/oaNe/1AXAA00044
• Gloves 1aau.to/oaoP/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Floor Jack 1aau.to/oach/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oZa/1AXAA00065
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@c.rupstudios2124]

Perfect demonstration

[@Horan931]

Good job

[@kingkoopur9212]

Love trq parts

[@FunwithAhadandSarina]

Its not need spring compressor tool in order to remove strut? Or that require for old cars with shocks?

[@kingkoopur9212]

Do you need to adjust the new strut or just put it in ?

[@two2pedal289]

Definitely a rust belt car. Why would any mechanic worth his salt not reassemble all this pivot hardware with liberal amounts of anti seize for future disassembly????