Gday mate, I’ve just discovered your channel after looking for ideas about a radius ball turner, I watch all your videos on your design and I’m impressed, your design is the only one I’ve found to have a bearing swivel which make for a smooth operation, thank you for sharing your idea it is much appreciated, Cheers mate and thanks. Matty
Hi , thanks for your comment . Yes I'm happy with this lathe . I'm working with stainless steel with no problem at all but if the parts you want to produce are bigger than 30mm in diameter I strongly recommend the next model Opti D240 , you will work much faster . What type of steel you will work with and how big ?
Great demo. I like how you do things. I would like to see just a little more light on the item. sometimes I can't tell what you are working on. Very good job. thanks for showing us.
Hi, the lathe itself is not so noisy but in some operations the noise level is gonna be high. Maybe if you use some soundproof insulation between your bench legs and the floor and of course on some walls also.
Very clean design! Is that a DC insert? Wouldn't a VC insert mounted ccw 17.5' allow a cut all the way to the ball mounting shaft, & eliminate a shoulder or further operations? Tnx
Hi im thinking about buying one of those lathes, what do you think about it? good? bad? Is it stong enough for steel? Good quality? Oh and nice vid by the way! i subscribed!
May I suggest something brother. Make some calculations on paper and cut most material away say at 45 degrees. then do the final machining. Will save you a lot of time. If you have a CAD or similar program, the calculation would be chicken feed.
Would you send me this too, please? I have the same lathe, but in different paint. BTW, in my channel you can see the "digital gears" for this lathe, now it has feed both directions (syncronous 0.01-0.25 mm/rev and non-syncronous 5-132 mm/min) and it may cut left-handed threads too (with any pitch from 0,001 to 4.500 mm).
That is the best ball making attachment I have seen. DARN GREAT WORK
Gday mate, I’ve just discovered your channel after looking for ideas about a radius ball turner, I watch all your videos on your design and I’m impressed, your design is the only one I’ve found to have a bearing swivel which make for a smooth operation, thank you for sharing your idea it is much appreciated, Cheers mate and thanks. Matty
PARABÉNS MESTRE SERVIÇO DE ARTISTA TECNOLOGIA DO OUTRO MUNDO.
Hi , thanks for your comment . Yes I'm happy with this lathe . I'm working with stainless steel with no problem at all but if the parts you want to produce are bigger than 30mm in diameter I strongly recommend the next model Opti D240 , you will work much faster . What type of steel you will work with and how big ?
Great demo. I like how you do things. I would like to see just a little more light on the item. sometimes I can't tell what you are working on. Very good job. thanks for showing us.
Hi, the lathe itself is not so noisy but in some operations the noise level is gonna be high. Maybe if you use some soundproof insulation between your bench legs and the floor and of course on some walls also.
Very clean design!
Is that a DC insert? Wouldn't a VC insert mounted ccw 17.5' allow a cut all the way to the ball mounting shaft, & eliminate a shoulder or further operations? Tnx
Very nice work. Where did you get that piece of equipment & will it fit on every lathe?
p
That is a real nice ball jig, have you cut steel with it,too? Thanks, Jim
Hi im thinking about buying one of those lathes, what do you think about it? good? bad?
Is it stong enough for steel? Good quality? Oh and nice vid by the way! i subscribed!
Very good job Guy !
Thanks for your comment . I wish you the best for the new year .
Thank you!!! I'm sending you some details about the ball attachment.
Would you advise me to buy this lathe?
What are the problems of this lathe if it exists?
May I suggest something brother. Make some calculations on paper and cut most material away say at 45 degrees. then do the final machining. Will save you a lot of time. If you have a CAD or similar program, the calculation would be chicken feed.
Cuanto le costo su torno maestro?
is it possible to order one? or you make it just for yourself :) :)
Hi again, i don't know i'm going to use it for hobby only, and i was just wondering how stong it is, and thanks for your answer!
Спасибо за наглядное видео
Congratulations!
Hi there. How noisy is this lathe? Can I use it in an apartment without annoying the neighbors?
You put your hands right in front of what you are doing...
just perfect !!....congrats !!
Impressive 👍
It.s agood idia and good device thank you....الله ينةر عليك
Gde mož kupiti za pravljenje kugli i kolko je para
Last night I dreamt of this video.
技術很精湛
feine Sache
thank you very much sir beautiful
Awensome
I think your lathe is in need of new bearings!
I am NOT a machinist but t sounds like slum thing not running smooth
very good
Very Good!
Le da muchas vueltas al asunto señor.
Would you send me this too, please? I have the same lathe, but in different paint. BTW, in my channel you can see the "digital gears" for this lathe, now it has feed both directions (syncronous 0.01-0.25 mm/rev and non-syncronous 5-132 mm/min) and it may cut left-handed threads too (with any pitch from 0,001 to 4.500 mm).
Tm🖒💚💚💚⚘
I send you a email.