From Australia ..... Absolutely love your channel. Your designs and ideas are so brilliant. I've been into small to huge RC for many decades and your creations are a total joy. Man you get close to your fingers with the razors sometimes 😂. Anyway, thanking you❤
information 2:40 supports at the wing roots should be oriented Perpendicular to the center line. in the case of a swept wing, there should be a fuselage spanning central main spar; located at thirty percent of mac. which is also where the cg should be. d
@@iammeobviously6815 It's like trying to accelerate already accelerated air. Think of it as putting a treadmill on max speed, as fast as you go, it still feels like no effort, it isn't efficient at all.
You are just awesome Bro 🔥🔥🔥 I thought that making planes from scratch is too much difficult but after watching your videos I am planning to make one. Keep doing Bro 👍👍👍
5:49 stab trailing edges should be Thin; symmetrically. 6:08 the chord of a control surface is PART of the wing/stab chord. thus, elevators should NOT be 'hanging out in space'.
7:06 less slope should be used at the vert-stab le, and the stab should not be so tall. 9:14 the shrink tube should NOT be relied on to hold this together. should use thread and CA, first.
information 7:30 the use of multiple motors has resulted in Two unwanted things, the auw is increased and the dom is negatively affected. it should be understood that a prop works best when it passes through undisturbed air.! here, design cons outweigh the pro's. !
@@bobflyman I'm talking about a jet fighter airplane kit model. Like F-22 or F-14 jet model. But this video you sent me hits on it but I want to see a real jet fighter toy model airplanes turn into a😉RC
tailerons is not a good solution. a better choice would be to control the split elevator with one channel (split/tandem pushrod) and the ailerons with another. this sort of three-channel configuration does Require that a pilot know how to Mix up-elevator inputs with aileron inputs. make the needed 'dual' pushrod by securely attaching Two steel wires at one end. wire lengths should accommodate connection to the elevator control horns symmetrically, and in a normal fashion. d
Very creative approach to the coreless motors in series! ❤
No you also used brushed motor in your delta audrino RC plane maybe 180 motor beside that nice 👍
Hello Max
5:01 it is Opposite of smart to put one propeller in the wash of another propeller.!!!!
Very nice work, so creative and with so little materiale. Good job.
From Australia ..... Absolutely love your channel. Your designs and ideas are so brilliant. I've been into small to huge RC for many decades and your creations are a total joy.
Man you get close to your fingers with the razors sometimes 😂.
Anyway, thanking you❤
information 2:40 supports at the wing roots should be oriented Perpendicular to the center line.
in the case of a swept wing, there should be a fuselage spanning central main spar; located at thirty percent of mac. which is also where the cg should be. d
Putting the motors behind each other is not efficient put them on the wings it is better trust me
Agreed
Agreed
It isn't practical with full scale, but these coreless motors barely get up to max rpm, so putting it in series is actually ok
@@iammeobviously6815 It's like trying to accelerate already accelerated air. Think of it as putting a treadmill on max speed, as fast as you go, it still feels like no effort, it isn't efficient at all.
Awesome ! Great ideas.
❤❤❤❤❤ love from rajsthan ❤
Cool little plane!
Bhai isme n30 motor use kar sakte hai
3:45 this technique can be used to Fabricate a (compact) fuselage-spanning DIHEDRAL BRACE.!!
You are just awesome Bro 🔥🔥🔥
I thought that making planes from scratch is too much difficult but after watching your videos I am planning to make one.
Keep doing Bro 👍👍👍
link for battery pls
How much weight can 2 8*20mm with 55 mm propeller take? I have made a twin motor sports plane but not enough thrust to even taxi
please make mini esc from old servo motor to make these types of mini airplanes
Bro, please send me a video of how to make a remote-controlled Titanic, so that it has a very powerful engine and can float on water.
Awesome plane😀
Bhai isme 9g servo and 150mah 2s battery use karskte he
So cool 🛩
Gracias por mostrar el corte del ala , muy buen modelo
Kreatif 👍⭐⭐⭐⭐⭐🇲🇨
5:49 stab trailing edges should be Thin; symmetrically. 6:08 the chord of a control surface is PART of the wing/stab chord. thus, elevators should NOT be 'hanging out in space'.
👌👌👍🏻👍🏻🙏🙏jai shri Ram 🙏
5:25 less sweep should be used at the stab le and the elevator trailing edge should be one straight line.
Wow, 👍👍👍👍❤❤❤❤
What is the name of receiver😢
I love this❤
Good🎉
7:06 less slope should be used at the vert-stab le, and the stab should not be so tall. 9:14 the shrink tube should NOT be relied on to hold this together. should use thread and CA, first.
Bhai pusher plane banao
Do you design these planes yourself? If yes can you make a tutorial how to do it?
New video kab aayegi intzar nhe hota
Muito muito legal 👏👏👍👍✈✈✈😁😁🇧🇷🇧🇷
Amazing thanks
Bro pls give the link of that servos 3.7g servo motor
beautiful
8:45 a z-bend should be as sharp as possible.! do this by, first, bending the wire slightly Past ninety degrees.
Sir what about the fai f1d plane making video?
how to connect the controller with the plane
Using Circuit board connect to the transmitter ( remote ) the plane . ok clear
information 7:30 the use of multiple motors has resulted in Two unwanted things, the auw is increased and the dom is negatively affected. it should be understood that a prop works best when it passes through undisturbed air.! here, design cons outweigh the pro's. !
7:30 wing has NO central main spar. meaning, the main wing could potentially fold in half at any time. d
8:59 extra bends in the wire are a MISTAKE.! z-bend is not great.
kolamma why didnt you put 2 motors on the wings and one on the nose...
Hello Brother ap swapnil Bhai ko jayan ta ho.....
❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Can you turn a regular Walmart cord airplane into a wireless RC airplane
£5 cheap foamie into RC plane. th-cam.com/video/gj4lk1SLVDU/w-d-xo.htmlfeature=shared
£5 foamie. th-cam.com/video/gj4lk1SLVDU/w-d-xo.htmlfeature=shared
@@bobflyman I'm talking about a jet fighter airplane kit model. Like F-22 or F-14 jet model. But this video you sent me hits on it but I want to see a real jet fighter toy model airplanes turn into a😉RC
Very nice! br
Love u bro
👌
अपने घरों के छत पर पानी 💧🫧🫵🏻 जरूर रखें please 🦜🐦🦚🦅🐧❤😊
Add a camera bro
Can you make a rubber band airplane from bamboo please
Swapnil Bhai ko jayan ho?????
Bina battery ka kaise ud gya
Aí como comprar o controle??
7:05 the location of stabs and control surfaces IN the prop wash is less-than ideal. d
Basically i dont understand this so once can u upload a video on this
tailerons is not a good solution. a better choice would be to control the split elevator with one channel (split/tandem pushrod) and the ailerons with another. this sort of three-channel configuration does Require that a pilot know how to Mix up-elevator inputs with aileron inputs.
make the needed 'dual' pushrod by securely attaching Two steel wires at one end. wire lengths should accommodate connection to the elevator control horns symmetrically, and in a normal fashion. d
when i made it first time i got failed but at second time i made it
that's real learning now you have much experience , congratulations & best wishes
plz pin me , am first i love watching ur videos
En algo parecido andaba yo. Te comparto th-cam.com/video/8jnwXWX6NYo/w-d-xo.html
How to connect the plane to the controller