Throttle Body Cleaning - Peugeot 206
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- How to remove, clean and replace the throttle body on a 2002 to 2009 Peugeot 206 with the 1.1 litre petrol engine. The part number is 9647925480. Thanks for watching. Please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Carb Cleaner ~ amzn.to/3yUmeKk
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.co.uk
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2021
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts. - ยานยนต์และพาหนะ
Както винаги - ПЕРФЕКТНО видео! Хубаво е да се свали и отделно да се изчисти машинката за празен ход. Поздрави от България и благодаря за перфектното видео! 👍👍👍
Thank you for watching ! 👍
Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own. Thank you for the information you provide.
Thanks, as always, for the video.
It was very useful for the intervention I made yesterday on my 206 1.4 from 2001.
Compared to what you showed, I added two things:
I also disassembled and checked the two elements attached to the throttle body. The idle motor and the idle sensor.
Having learned from you to always disconnect the battery, I then cleaned the electrical contacts and put electrical tape on the cables. Bye!
Good tips, thanks for watching !
Yeeeaaahhhhh very very good sometime mine it tic tac tic tac when i dont utilise my 206 for long Time
Nice little Video.I've found that stubborn Carbon deposits can be removed with a mixture of Acetone,Vinegar and cheap Cola.Just soak for a few hours.Thank you for sharing .
Thanks for the info!
Thank you so much.
You're welcome!
thank you the video is good to clean in how many years 🙏🙏
What is the purpose of cleaning the throttle body ? How ofter is it recommended ? Thank you for the video!
Hi my I'm going to replace my 206's throttle position sensor, after replacing do I need like to calibrate the car?(if yes, how will I do that?) or the ECU will automatically detect the new sensor and reset it?
My car is not reaching 2500rpm atm and it detects issue on the tps. thanks
Some cars calibrate the new throttle body automatically. Check this link: cartipsdaily.com/does-a-new-throttle-body-need-to-be-reprogrammed
should clear the throttle position sensor code , hopefully
How to figure out if I need to do re-learning/reprogramming procedure after changing the throttle body?
Also how to find the right procedure for my car which is exactly the same as this one in the video
I think you need to use a specialised scan tool but I'm not sure to be honest, sorry
Is it possible to clean it without having to open the lid and the parts? How is that? Explain the boring detail
It is better to take it off and clean it. If you clean it when it's on the running engine, all the dirt and cleaning fluid has to pass through the engine which is not good.
@@screwsnutsandbolts thank you
Adaptasyona gerek varmidir
If it's a new throttle body, yes
He didn't show how to re collaborate the rpms as u gotta do that after
So much trouble for nothing...the sensors ought to be removed in order to clean thoroughly the throttle body.