Tip For owners of ER Doubledealers with loose elbows (ie everyone): there's a way to manipulate the double hinge elbow where the top of the forearm locks into the bottom of the upper part of the arm, creating a 90 degree angle and allowing DD to hold his giant gun with no droop problems. Hope this helps, and thanks for the review. He's a great figure!
Instructions say to put the missile on TOP, it clips on firmly and the tail connects to it. If you want to do the G1 thing with it below, the insides of the arms can secure the missile very well in fact, using its two short pegs. But I did learn how to fold away the head correctly today so thanks!
In Masterforce, his name was DoubleClouder, Clouder had 2 Masterforce rings that behaves simlar to Knok and Skar, Overall, he looks like Doubleclouder to me.
So.... at the risk of having missed a joke, as well as being "That guy", the missile actually goes on the birds back if we're going by the instructions. This however.... kinda sucks with how easily the tail section pops off, so yeah, I actually put it under him or just leave the accessories off entirely in bird mode. But yeah, there's 2 pegs on the missile made to go into the tail section on the bird back so the tail can fall off even worse. lol
These figures have went way down in price,(got mine for $22 yesterday) and there's a ton of them for sale one guy had about 30 figures trying to sell them cheap.
@@dedalionarts6077 I dont remember this too well but I'm pretty sure they stole megatrons missle tank mode from beast wars when they made cybertron red alert. I may be wrong but im pretty sure all they did was give him a new head design and changed the colors
@@jacob7358 yea like moust RECOLORS, and how he stole it? Hazbro just reused the mold, if enother compani used this mold with out Hazbro accepting them yea, that would been stealing. Also you think red had it bad with this, just go look for scattershot defence team mold.. Drop shot Flack Heavy loude( the last one I m not shure, what I mean here is lemon yellow recolor of that mold) Also Megatron wan t the only one who used this mold of red alert, just go check Count down TFwiki page..
@@jacob7358 couldn t be that sayed for every recolor/ remold they made? Even those from cannon like SEEKERS aka. Starscream RECOLORS or just any character that is an recolor / remold in general l like Bluestrick, Clifjumper, Smokescrean, Hoist, Grappul, Red alert and so on? And at least in case of BS Megatron there where on cybertron before they crashed on earth, so they had to give them vechicull altmodes..
* has seen masterforce * i actually kinda liked clouder in masterforce ( for context his japanese name is double clouder in master force ) he was kinda an odd twist on a what we got with punch counter punch except there punch was an autobot spy with a decepticon mode to be able to blend in dealer/clouder was well he was human and where as the each of the other power/god masters had one set of braces for one side or the other he had one brace for each and where as he initially joined the autobot god masters was for a while anyway actually working for the cons
Balt, I actually like the fig a little better now, the promo material made it look like a big box on legs. The missile in Gun-Eagle mode does split, with the rear portion attaching to the back port. I do see some possibilities for remolds of this figure. How about Gobots Zod? Or a Shield Heli-Carrier crossover?
My figure has the same issues you're did. The bird mode is ridiculous, but I kind of like it, although the tail feather section was so badly engineered. On the box it shows the missile pegged in on top, on the tail feather part, you know the one that falls off if you look at it funny. They could have done such a better job on that design. I was strangley looking forward to this figure too, since I did not have the original. I'd stopped collecting at the time of the powermasters when I was a kid.
I have a transforming figure suggestion. Please check out Bandai's DX VF-31 toy from the Macross series (the show that inspired jetfire). Its pricey due to being a Japan exclusive but it is the best transforming figure I have ever purchased. Leader class scale with amazing details, hand painted, hidden play features, zero robot kibble in vehicle mode, and one of the coolest Gundam-like robot modes ever with the vehicle mode just melting away. Also it's a triple changer. The box it self is art and includes lots of accessories like several alternate hands, knives, to scale pilot figures that fit in the figure, and several display stand options. There is currently one VF-31e (orange) available for 2 day shipping from Canada on Amazon. Its worth the price and definitely a display piece for older collectors.
you placed the missile in the wrong place in bird mode, it has a black clamp that connects to where you clipped the tail feathers to, then just clip the tail feathers to the bottom of the missile to complete the bird look.
The problem is that appearantly all copys are the same,..the hip ratchets, the elbows...my figure hss it and i watched pretty much every review on DD that ist currently uploaded
baltamatrix. i have been a fan of your channel for a long time. And so, I wanna tell you a secret. my name’s not james garner. it’s Matthew, Matthew garner. James is just the name of my dad, and also, you look like the older version of me. I’m also a huge transformers fan, too, and i’d love to meet you, and your son. you guys seem like real nice people. (:
theare is one more huge issue to mine Doubledealer.., that i almost saw the same problem in many youtube reviews, and also i think its in your figure. BUT noone talks about it. When its on his robot mode, the figures straighted up the legs, has a huge waste problem. It leans towards to the left!!! If you check yours, i think it happens also. Mine is completelly to left, and i think its his hips the reason, or something on his waste or legs.... I have to try for a long time to make him stand correctly. This must be a factory issue. Also i think that maybe the packaginng is too tough to his body... i dont know.... Maybe you could see yours and tell me if youj have the same problem??? Maybe someone else with the same???? Thank you
They should have called this thing Double Loose. Joints are too loose and knees pop apart. Disappointing to say the least. Good video once again Mr. Baltmatrix.
You had the wings slightly miss transformed but the way u did it did fix my problem with the missile truck mode. Also you supposed to peg the missile itself in the tailfeather slot, but I figured you tired to make it as g1 as possible in retrospect I think the design team made it that way to prevent birb dick jokes. All in all its a good figured mostly brought down by loss joints and birb mode
Decepticon insignias upside down for Doubledealer's bird mode silly! Hello! G1 Starscream's insignias are upside down when he is in robot mode, and is that silly?
I picked this up at my local walmart about a week ago, tried to transform it once and the knee joint came out of the socket, it took me about an hour to get it back in! Now I am afraid to try and transform it anymore...
Pretty easily. Cyberton Defense Red Alert was also a giant missile truck. Only real remolding it needs is the legs/front of the vehicle mode, the head and the chest.
Does anyone else have a terrible time trying to transform this figure? Can't turn it into bird mode with out making a million stress marks an wanting to throw it out a window
@@doklatcake9394 More like a double agent. Working for both sides. In the anime he started out as a decepticon spy but joined the Autobots pretty soon. He continued to work as a Spy but for the Autobots this time. I Don't know much about his g1 comics appearance though so that could be different.
@@doklatcake9394 That a good question. I don't think they thought that much about it and just slapped a con insignia on the packaging. That's my best guess
The chest piece rotates to show which Micromaster is inside him, and the engine piece is supposed to attach to the 5mm peg on said Micromaster
I could definitely see them repainting and retooling this into Cybertron Defense Red Alert.
I hope they do a heavy remold of it then
And Predator Stalker.
They won't.
😮 but would they
I see them doing more of a machine wars Soundwave with this, especially with that chest gimmick
Just get rid of the Eagle mode and change couple pieces and you can have a Transformers Generation Cybertron Red Alert
Tip For owners of ER Doubledealers with loose elbows (ie everyone): there's a way to manipulate the double hinge elbow where the top of the forearm locks into the bottom of the upper part of the arm, creating a 90 degree angle and allowing DD to hold his giant gun with no droop problems. Hope this helps, and thanks for the review. He's a great figure!
Found that out myself the other day, but still thx :) still searching for a way to fix these loose rachet joints in the hips though
@@primecable just open the waist piece and add superglue where needed
For 50$ I would also expect my figure to being able of hold it's weapon properly, I hope you can fix it.
Instructions say to put the missile on TOP, it clips on firmly and the tail connects to it. If you want to do the G1 thing with it below, the insides of the arms can secure the missile very well in fact, using its two short pegs. But I did learn how to fold away the head correctly today so thanks!
In Masterforce, his name was DoubleClouder, Clouder had 2 Masterforce rings that behaves simlar to Knok and Skar, Overall, he looks like Doubleclouder to me.
I always come to balt to talk myself out of a figure, works everytime!
So.... at the risk of having missed a joke, as well as being "That guy", the missile actually goes on the birds back if we're going by the instructions. This however.... kinda sucks with how easily the tail section pops off, so yeah, I actually put it under him or just leave the accessories off entirely in bird mode. But yeah, there's 2 pegs on the missile made to go into the tail section on the bird back so the tail can fall off even worse. lol
Can't forget the Hollow as heck Vehicle front end and the Issue of Bird mode being less well proportioned than the G1 figure.
These figures have went way down in price,(got mine for $22 yesterday) and there's a ton of them for sale one guy had about 30 figures trying to sell them cheap.
Doubledealer: I honestly don't know which side i'm on.
The generation one figure was my favorite transformer toy when I was a kid!
I was waiting for you to review this!
God, do I love this Murder chicken. Such an amazing figure.
Looks like a realy fun figure. Very unique.
@2:10 *There are also thigh swivels in robot mode!!
The amount of times you've gotten loose joints... Hasbro should hire you on as a freelance QA tester
Ok with yours having the qc issues it’s clear that his palms are (not) sweaty, knees weak, arms are (not) heavy. I HAD to make that reference.
I suspect this might be retooled into Machine Wars Soundwave, what with the tape storage and all.
Or even beast wars Megatron, view videos about how BW Megatron stole the Golden disc, he was transforming in to misile truck..
@@dedalionarts6077 I dont remember this too well but I'm pretty sure they stole megatrons missle tank mode from beast wars when they made cybertron red alert. I may be wrong but im pretty sure all they did was give him a new head design and changed the colors
@@jacob7358 yea like moust RECOLORS, and how he stole it? Hazbro just reused the mold, if enother compani used this mold with out Hazbro accepting them yea, that would been stealing.
Also you think red had it bad with this, just go look for scattershot defence team mold..
Drop shot
Flack
Heavy loude( the last one I m not shure, what I mean here is lemon yellow recolor of that mold)
Also Megatron wan t the only one who used this mold of red alert, just go check Count down TFwiki page..
@@dedalionarts6077 I meant in the way of they were lazy and didnt wanna come up with a new design so they ripped it from something they already made
@@jacob7358 couldn t be that sayed for every recolor/ remold they made? Even those from cannon like SEEKERS aka. Starscream RECOLORS or just any character that is an recolor / remold in general l like Bluestrick, Clifjumper, Smokescrean, Hoist, Grappul, Red alert and so on?
And at least in case of BS Megatron there where on cybertron before they crashed on earth, so they had to give them vechicull altmodes..
I bought him and ALSO had loose joints, returned him.
You can fix loose joints with a little super glue and work it in
* has seen masterforce * i actually kinda liked clouder in masterforce ( for context his japanese name is double clouder in master force ) he was kinda an odd twist on a what we got with punch counter punch except there punch was an autobot spy with a decepticon mode to be able to blend in dealer/clouder was well he was human and where as the each of the other power/god masters had one set of braces for one side or the other he had one brace for each and where as he initially joined the autobot god masters was for a while anyway actually working for the cons
Balt, I actually like the fig a little better now, the promo material made it look like a big box on legs. The missile in Gun-Eagle mode does split, with the rear portion attaching to the back port. I do see some possibilities for remolds of this figure. How about Gobots Zod? Or a Shield Heli-Carrier crossover?
My figure has the same issues you're did. The bird mode is ridiculous, but I kind of like it, although the tail feather section was so badly engineered. On the box it shows the missile pegged in on top, on the tail feather part, you know the one that falls off if you look at it funny. They could have done such a better job on that design. I was strangley looking forward to this figure too, since I did not have the original. I'd stopped collecting at the time of the powermasters when I was a kid.
i like your new editing style
I have a transforming figure suggestion. Please check out Bandai's DX VF-31 toy from the Macross series (the show that inspired jetfire). Its pricey due to being a Japan exclusive but it is the best transforming figure I have ever purchased. Leader class scale with amazing details, hand painted, hidden play features, zero robot kibble in vehicle mode, and one of the coolest Gundam-like robot modes ever with the vehicle mode just melting away. Also it's a triple changer. The box it self is art and includes lots of accessories like several alternate hands, knives, to scale pilot figures that fit in the figure, and several display stand options. There is currently one VF-31e (orange) available for 2 day shipping from Canada on Amazon. Its worth the price and definitely a display piece for older collectors.
The seekers in a nutshell: Missile Birds
how do i get that platform piece in without breaking the figure? and without causing stress marks?
you placed the missile in the wrong place in bird mode, it has a black clamp that connects to where you clipped the tail feathers to, then just clip the tail feathers to the bottom of the missile to complete the bird look.
I got mine a month ago and Im waiting to open it. I will let you know if it has QC issues
I think the loseness is an universal problem, the same joints are loose on my doubledealer
The problem is that appearantly all copys are the same,..the hip ratchets, the elbows...my figure hss it and i watched pretty much every review on DD that ist currently uploaded
Good taste with the G2 Meg. I got the special Seige version with the two battlemasters, so I wasn't about to just buy the same figure again
baltamatrix. i have been a fan of your channel for a long time. And so, I wanna tell you a secret. my name’s not james garner. it’s Matthew, Matthew garner. James is just the name of my dad, and also, you look like the older version of me. I’m also a huge transformers fan, too, and i’d love to meet you, and your son. you guys seem like real nice people. (:
I laughed at 13:17 🤣
I guess I'm not adult enough to *not* laugh at that kind of humor.
His wings can fold up in robot mode
Legs are fixable and maybe the arms. The problems I had was the legs and wings was too loose
Was there a guy like this, with a radar dish instead, back in the day?
Great figure but hoping for a BPF oversized one
The rocket/missile looks like Machine Wars Soundwave
theare is one more huge issue to mine Doubledealer.., that i almost saw the same problem in many youtube reviews, and also i think its in your figure. BUT noone talks about it. When its on his robot mode, the figures straighted up the legs, has a huge waste problem. It leans towards
to the left!!! If you check yours, i think it happens also. Mine is completelly to left, and i think its his hips the reason, or something on his waste or legs.... I have to try for a long time to make him stand correctly. This must be a factory issue. Also i think that maybe the packaginng is too tough to his body... i dont know.... Maybe you could see yours and tell me if youj have the same problem??? Maybe someone else with the same???? Thank you
the isntructions tell you to mount the missile on the top of the bird mode though..
They should have called this thing Double Loose. Joints are too loose and knees pop apart. Disappointing to say the least. Good video once again Mr. Baltmatrix.
Great Review and Great movie Recommendation!
Man I didnt know about the emblem kr tape featuers.
Ah just in time for him to appear in the Earth Wars game.
Damn, you keep getting these QC issues. I feel pretty bad and I hope mine won’t have any of it
mine doesn't have them
what's with balt and wobly lower parts
He looks good.
You had the wings slightly miss transformed but the way u did it did fix my problem with the missile truck mode. Also you supposed to peg the missile itself in the tailfeather slot, but I figured you tired to make it as g1 as possible in retrospect I think the design team made it that way to prevent birb dick jokes. All in all its a good figured mostly brought down by loss joints and birb mode
deathsaurus would be a good repaint
Decepticon insignias upside down for Doubledealer's bird mode silly! Hello! G1 Starscream's insignias are upside down when he is in robot mode, and is that silly?
Also, I’m using my dad’s account because I don’t have my own. Love you!
Does anyone know where to buy Frenzy and Ratbat?
I think they were part of the spy patrol pack for Gen selects
It’s fine
I WON THE QUALITY CONTROL LOTTERY YES. Oh mine actually pegs in the shoulders the tail thing
I used to attach thr Missile on top
I thought he wasn’t aligned in the show.
Wow i must get this guy
hey baltmatrix, how's my favorite toy reviewer doing in this post pandemic?
I picked this up at my local walmart about a week ago, tried to transform it once and the knee joint came out of the socket, it took me about an hour to get it back in! Now I am afraid to try and transform it anymore...
Yah the legs on mine are bad too
can hasbro make joint stornger
Nice review
Over all, a 8,5/10. The only nick picks I have are.
1 the way how decepticon stbols are looking in Bird mode.
And 2, where is his Mercenary insignia?
Wish there was a retool of him with the head that was show accurate and have the Mercenary insignia
I think you need the Generations Selects Knok and Skar to complete his look.
Good luck finding them. Only scalpers have any for sale now.
Same for the arms
Cool I'll keep mine MIP
No Powermasters?
Yes but you have to buy them separately in a set. I know... What the heck Hasbro?
This bird looks like a gobot oooooooooooohhhh recked meme
Are you going to review scorponok when he is released
Scorponok has been out for quite some time
@@CoyoteMonday not where I live maybe it has been released in America but not in England
Yeah he's been out for months here
@@CoyoteMonday lucky
How can this be repainted of redalert
Pretty easily. Cyberton Defense Red Alert was also a giant missile truck. Only real remolding it needs is the legs/front of the vehicle mode, the head and the chest.
You do know he can be bad guy to.
Does anyone else have a terrible time trying to transform this figure? Can't turn it into bird mode with out making a million stress marks an wanting to throw it out a window
My figure is super loose too
Geez man, if you shake the crap out of it, what figure isn't wobbly???
the wheels look to small compared to the size of the vehicle mode..
😒 You don't say....
@@pancho855 shhhh don't tell anyone
*OPTIMUS, WE'VE GOT A DOUBLE AGENT!!!!*
Looseness on a transformer WHAT? NO, REALLY?
Ollie’s has him for 20 dollars I’m considering getting him
Ok. I don’t see any transformers in my local Ollie’s when I first searched in the toy section
Perhaps another Ollie’s will have Transformers
G1 dd isn’t stupid
Something tells me that that would be the opposite of a cloaca LOL just kidding
I saw doubdealer at my walmart
this is leader class? i say its a scam for the pricing.
Have the same problems
The Bot Critic.
The knees just don't work waste of money and time
Red alert
G1 dd not stupid
@baltmatrix I also have the same QC issues that your figure has. Hasbro needs to get better at quality control.
Yo
_Bit bits_
We are the first 4 commenters
a
Is he a con or a bot
Both
@@92Raider-art so he is a bounty hunter
@@doklatcake9394 More like a double agent. Working for both sides. In the anime he started out as a decepticon spy but joined the Autobots pretty soon. He continued to work as a Spy but for the Autobots this time. I Don't know much about his g1 comics appearance though so that could be different.
@@92Raider-art so why does his box have con image
@@doklatcake9394 That a good question. I don't think they thought that much about it and just slapped a con insignia on the packaging. That's my best guess
The rockets look dum
yes i was early
He gets a dislike for this video because he bashed the g1.