@@augustskilar2857 all 5.3,s should have the 4l80e as the 5.3 is too strong for the 4l60 unless you drive it like grandad. and its just too much fun. these trucks are just as fast as the fastest mucle cars from the 60,-70,s.
Remember someone would leave the school in 2002 either burning out 2 lefts, or rights, and on a wet day all 4's. It was a 1992 mod. Thing had very low lope in idol.
you just tested the setup i wanna try judging by the fact it broke the tires loose from a roll in a 3/4 ton 4l80 heavy diff it would probably go good in a rcsb half ton or my s10
I have a set of 826s, a hd2 shift kit, and planning on going with a tbss intake with bigger injectors. What do you recommend for a cam? I was thinking the truck Norris Cam since it's a heavy 2500hd
Cam motion stage 2 6.0 cam shaft, 706 heads off a 5.3 for more compression, long tube headers, electric fans. Got a 2500 stall and nnbs intake I’ll be installing soon. Also want to ditch the 3.73s for 4.10s. Stock these 2500lds are so slow
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 3 | 6 ต.ค. 67](http://i.ytimg.com/vi/fTfIMFVjt_8/mqdefault.jpg)
Finally back with them good old 99-02s baby. If you don’t got a 5.3 or 6.0 are you even bout that race life?!?!
Got a 4.8 lol
@@Valdemar-Perez-III Close enough 😆👌
@@Valdemar-Perez-III oh yeah a 4.8 also lol
Cammed 6.0 with headers
Is no one going to talk about the 8.1
Whenever I wanna hear my 5.3 scream without actually firing up my truck and burning that expensive gold I just tune into revtap keep em coming boys
Dang I’m honestly surprised you guys haven’t built a regular cab short bed lowered truck yet. Getting pretty good with those LS motors
@Jim jibroni ???
@Jim jibroni 😭😂😂 I’m deadddd
@Jim jibroni this guy
Lowered trucks are nice but everybody’s doing that.
If a truck aint stock or lifted, it aint a truck. You can't lay a pallet of shingles in a lowered truck now can you.
Absolutely love you guys' content
haha just came from one of your videos to this one
you are the best to
Damn y’all can make ‘em run for sure , love hearing y’all’s little tricks and mods
Upload more even if it’s just burn out shorts I love watching yall
You guys need to upload more!!! we need that rev limiter content🤘🤘
I think the good old neutral drop would've been a cheaper option.
Cheap till the tranny drops
you dont want to neutral drop a 4l60 e trans. the sun shell will brake
Meanwhile my 4L60e is slipping.
Not to be that guy but it’s a 3/4 ton so 4l80e not 4l60e
@@augustskilar2857 all 5.3,s should have the 4l80e as the 5.3 is too strong for the 4l60 unless you drive it like grandad. and its just too much fun. these trucks are just as fast as the fastest mucle cars from the 60,-70,s.
You guys make me piss my pants the whole time & make me wanna slap the same package on my 02 2500hd 😂 every vid is incredible
Thanks for the advice, man!! Now I can do a burnout on my 2005 Gmc Sierra!!!
Dude I don’t clock in in 10 minutes. Perfect timing.
Underrated channel. Fuckin love you guys
Come on boys more videos! We need these in our lifes!
Love your guys channel y’all never disappoint
Yeahh!!!!!!!! .
Did you increase the Rev Limiter RPM? Will the oil pump handle the extra rpm's?
When we gonna see that badass boosted truck again 👀
North Carolina boys are back, love the content, please post more
That was a thick burnout
I smelled the freedom through my screen
Y’all killing it 🤘🏼
Remember someone would leave the school in 2002 either burning out 2 lefts, or rights, and on a wet day all 4's. It was a 1992 mod. Thing had very low lope in idol.
Hell yeah, you guys are back!
The videos *Never* disappoint! 🤣
bro I stg I hope you guys become famous 🤣 “got that 110 in herr “
Reasons why I will always buy a silverauto absolutely love the older silverautos can't out beat a cloud of smoke with chevy.
2:46 oh shit that center console looks sick.
you should've added: totally easy cost free (SOLVED NOT CLICKBAIT) to the title! this was very helpful!😅
We need an update on the work rig. More limiter content please
As a city guy, they all sound like Boomhauer.
you just tested the setup i wanna try judging by the fact it broke the tires loose from a roll in a 3/4 ton 4l80 heavy diff it would probably go good in a rcsb half ton or my s10
Best way to break in new cams and expensive internal engine components? Redline the piss out of it for 30 seconds straight and burn the tires off.
This shit is too awesome hahaha 🦅 Are the hats still available
Hell yeah love that rev limiter
I have the same truck but in red and I always wondered how to make bournout in a 4x4
1:00 what a pic man shit. Nice mountains in the back round Chevy rippin them tires off the wheels boy woo!
its that auto lock rear axel that keeps these from roasting the tires. i wish mine didnt have it .
g80 auto locker-sucks for burnouts
by far the best youtube channel
Anyway you can post a pic of what you done to it I got the same truck and it won’t do dog shit and that sounds good afff
Did yalll pull a fuse or actually do somthing
GMT800 FOR THE WIN
Bet if you would of been able to do that without the upgrades if you would of just put the smaller tires you used in the actual burnout
Hell yea hoss keep ‘em comin
Ol' Cleeter would be proud. (Cleetus)
That's something to be proud of rite there!
So I guess I just needa add some horseys and sparks and wires to my 4.8 Yukon 2004 right?
yall never disapoint lol
Been watching this channel before they got the work rig!
It's probably on 4 cylinders every other manifolds leaking winder why it wouldn't lol
Dude this is awesome
Had the same truck bought brand new 2000
2500 not an HD gas guzzler would not do a burn out even in the rain
Always love these videos!
And there is the torque converter or trany pump whine.
coulda just crimped off the rear brakes. but then the only down side of that is not having rear brakes.
I have a set of 826s, a hd2 shift kit, and planning on going with a tbss intake with bigger injectors. What do you recommend for a cam? I was thinking the truck Norris Cam since it's a heavy 2500hd
Yeah that be a good one or any stage 1 cam around 212/216. Stage 1 summit racing truck cam is pretty nice
@@Revtapindustries alright, what do you guys use for tuning? I was thinking of getting hp tuners
What did you fix? Can you answer in a comment please? I’m having the same problem
Following lol
Keep up the good work!!
My brakes won't hold like that but it's not a hydraboost
Make this guy famous
My 1500HD won't do one either. Brakes are to strong in the rear. I know this because I chained it up and then bam burnout no issue
You could make a golf cart do that lmao, that’s not impressive
what did you add or why did the truck whine
How much money spent? How much power gained?
does this hurt the truck in anyway @ 0:12 ?
Yall need to go to the freedom factory an enter one of cleetus' burnout competitions
If Cleetus would pay out/do prize money we would
@@Revtapindustries in it to win it baby
4l60e left the building
Love you boys, just upload random vids yall got because this shit is halarious
Lol if a 6.0 can't lite em up it just needs a damn tune up it was probably running on bad coil pack or 2.
Ran fine stock
I hear that charger 🥓
My only complaint is you need to upload more
Nice supercharger wine lol more like power steering pump
I was just looking at old work rig shit 30 minutes ago and here I go lol
How do u burnout in a automatic 5.3 I’m going to try for first time
Do a video about how fucked the fuel prices are
Love these videos!!!!
I have a 2004 6.0 2500 LD truck and it’s an absolute turd. I would love to know exactly what you guys did to wake that one up.
Stage 2 cam. Mine is sluggish af too.
Cam motion stage 2 6.0 cam shaft, 706 heads off a 5.3 for more compression, long tube headers, electric fans. Got a 2500 stall and nnbs intake I’ll be installing soon. Also want to ditch the 3.73s for 4.10s. Stock these 2500lds are so slow
@@Revtapindustries that's sick af I thought you were bullshittin
@@Valdemar-Perez-III needa open it up w some air flow
I hear a supercharger
Lol no cam or 706 heads more like a vice grip on the rear breaks lol
What did you do to it. Plz tell me
Damn what engine was the truck?
Prolly a 6.0 or a 5.3
I know a can and headers and stuff wasn’t actually put in how was it running better?
It’s running better because it had a cam headers and heads on
lit a damn bonfire under them chevys
My 1500 on my page won’t hardly do a burnout lmao I need a stall cause the cam is too big
I wanna know how you made it actually do the burnout
Lol it says in the video
Put your foot on the brake and floor it
Should take the turbo off my 7.3 and put it on my 300k 5.3?
Great idea
Nah fr tell me what your doing to get them old trucks ripping like that what the fuck
Let me come pick up that camper rig up off your hands!
You guys should buy a Chevy express van and do ts😂
They did
Does that thing have a supercharger?!?!?
Bring back the hats!
Make shure your E brake isn't on 🤣🤣🤣🤣🤣
What’s link to the kit lmao
Shits to damn good. 🤣♥️
Love this shit 🤘🏼
@2:05 sounds like a supercharger
To do a rolling burnout with a 6 liter you would need one lol.
That’s what these trucks sound like when they have No power steering fluid 😭😂 my truck does the same thing
Just a couple a good ol boys
Yeah same for me
So all you did was a cam and tune?
No
pedal to the metal.....keep'er in the middle.
What language are you guys speaking?
Rebel
Ukraine
Sure you didn’t put a supercharger under there
Noice, you didn’t show the hillbilly line lock , the vise grips on the rear brake line
🧐