I've almost decided to drill a hole thru the side of the white box so a screwdriver has a better angle to reach the two back screws, use a pen camera to see where the screws are, one for each servo, then fill the hole with silicon sealant once I've replaced the servos and gotten those hellish screws back in and tight
Hi. Great work. On the way to replacing the other actuator, I pulled the servo. There are two spacers (not washers), which slide along the plastic slots. One is messed up. In a conversation with a dealer, he says there's no part number for the spacer, just the part. That indicates to him it comes with the servo. I'd rather not have to order the whole thing just to get the spacer. Does anyone have spares?
Hard is relative. Indispensable tools: a right-angle hex driver, a flex hex driver, and a long (2") #2 phillips. I've seen people get away with a small flathead, but it truly sux.
![TEEDEE TADA - DIAMOND NARAKORN X LEGO LYKN [Special Dance Performance]](http://i.ytimg.com/vi/QgtZedFeumA/mqdefault.jpg)
Awesome job.
Thanks a lot man, this saved me tons of time and frustration! In diagnosing, ordering and replacing! 🕺🏻
I've almost decided to drill a hole thru the side of the white box so a screwdriver has a better angle to reach the two back screws, use a pen camera to see where the screws are, one for each servo, then fill the hole with silicon sealant once I've replaced the servos and gotten those hellish screws back in and tight
Hi. Great work. On the way to replacing the other actuator, I pulled the servo. There are two spacers (not washers), which slide along the plastic slots. One is messed up. In a conversation with a dealer, he says there's no part number for the spacer, just the part. That indicates to him it comes with the servo. I'd rather not have to order the whole thing just to get the spacer. Does anyone have spares?
Dang, I'm going to have to do that this weekend. Now I'm worried it'll be hard to do
Hard is relative. Indispensable tools: a right-angle hex driver, a flex hex driver, and a long (2") #2 phillips. I've seen people get away with a small flathead, but it truly sux.
Where did you get that tool from? I've been swearing under the dashboard for 3 hours and just cannot get a normal ratchet to work
Homedepot sell the angle driver attachment. Sorry for the late response.
Appreciate your work. But do you have the part number for it?
here are the part numbers 87106-35140, 87106-35180,8710635140, 8710635180
www.ebay.com/itm/195570803458 here's the link as well. hope this helps!
Can I buy it from Amazon?
Yes that’s where I bought the rest of the servos.