Very useful and informative. I have a Neff double oven and never had to change a G9 bulb before and it was a bit fiddly especially getting the bulb prongs in the right direction. Bit of a tip ensure that when you take the old bulb out check which way the prongs are so it is easier to fit the new one
@@lords-electrical I really appreciate the efforts of the people who make this kind of video. For some, it may be tinny, but I avoided the "tragedy" trying to unscrew 😬 the light bulb 😂 Tkank you 👍☺️
Either do not touch the new halogen bulb with your bare fingers -or- clean it thoroughly with alcohol before turning it on. The oils from your fingers will cause premature failure....
I need to replace the bulb on my Ariston oven model FK898E P X AUS S. It is nothing like the ones you demonstrated as it’s behind a square flat cover. Thanks.
I doubt I will get a reply since this video was 4y ago. But is it dangerous to substitute an oven bulb ? The bulb from ceiling fan fits in my oven and comes on when I turn it on with the switch and when I open the oven door. The oven bulb is 15 watts, ceiling fan bulb is 13 watts . Can I use it? Janet Shelton
It will only be suitable if the bulb is capable of being up to 300 degrees C as all oven bulbs are. A standard fan bulb will not normally be suitable unfortunately.
Hello. Very informative and well done. I have a LG LRE30453ST oven that I would like to replace the bulb and get much better light. I know I can't use LED due the inability of the product to handle the oven heat. That said I was hoping you could recommend a halogen or similar product that will upgrade the light output of my oven. Thank you
Wow this is useful having got a new oven with led bulb and a different cover altogether to my old one im now scared to unscrew the glass cover it sounds crunchy !!! So i may leave it and emigrate!!!!! Or ill get neff or oven cleaner guy to do it as i can't even shift the housing so i won't try !!!
I know exactly what you mean by a crunchy sound. It is normally the glass turning on the catalytic liner that makes the sound, but that is quite normal.
ours is a belling optima 591 about 14/15 years old. the bulb is in the bottom oven and is behind a glass plate at the side of the oven. looks as though I have to remove the self cleaning side wall lining first
If it is the same as other Neff ovens, the glass cover should unscrew and then you have access to pull the bulb out and replace it. It can be difficult to unscrew especially if it is quite a tight fit.
Annoyingly i have downloaded the instructions but it doesn't say which bulb to use. The only way to check is to remove the old bulb and check which wattage it is from the old bulb
I have a NEFF oven model GB-1036.51 HCSG (Yes it is old) on which I need to replace the bulb. The bulb cover is rectangular not a screw on. How do I remove the bulb cover and what bulb should I get please.
I searched AEG competence oven. Which has 2 lights, one at back easy unscrew cover. But, the one the side, I can't get the cover off. How do I change that one!! 🤔
Unfortunately sometimes they can be really difficult to get undone, especially as the glass cover has been heated up and cooled down many times. The main way i have found works is to use a silicone oven glove to undo it. You can get a good grip on it.
Hi, I found the video very helpful, but my oven is an AEG and the bulb is at the front of the oven centre. I have removed the cover but can’t get the bulb out, please do you have any suggestions. Feeling the bulb, I think it may be the G9 shape. Thanking you Elizabeth
I've got a friend with a Rangemast 90 older model oven with a smashed casing and a blown bulb. It feels like the casing is stuck and with the sharp broken points I was struggling to remove it. I don't honestly know if I would need to take the back off the oven if that would help. Any advice would be very welcome, thank you for such a thorough, helpful video anyway 👍
Hello, we have B27CR22N1B, the other version of the hide and slide. Can you tell me how you remove the cover for it please? Ours won't budge. Thanks :)
That was a great well explained video thanks very much. I have a Stoves Sterling & struggling to get bulb out. It's a halogen g9 with pins but not sure which either 25 or 40 w. Any tips please. Thanks
Bit late now, but might help someone else. We have a Stoves Stirling 600MF. Search for a bulb by model number and it only lists a £18 sub assembly. I took a picture of the G9 that came out and then zoomed in and tweaked the picture settings. Ours was 240V 42W Hungary GB F3. 42W seems like an oddball but more than happy to put a 40W back in.
Wish I had seen this first. Unscrewed the glass bulb cover on my hotpoint oven. Didn't know what bulb was in there. Pulled on it, bulb broke cutting my finger. Not sure if one of the little silver parts is still in there. Not sure what to do.
Oh dear, hope you are ok. First of all you need to see what kind of bulb it is, either screw in or just a pull out type bulb. Do you have the model number and i can have a look. If the bulb has broken, there is a good chance that there is still part of the bulb in the bulb holder.
Unfortunately on a lot of ovens, when the oven is heating then cooling the glass cover, it can make it really difficult to get the cover off. Not really a lot of advice on this, all i can say is try and be careful not to break the cover.
Hi just seen your video so I think you can help me . When I unscrewed the bulb out of the oven it came out leaving the threaded part in the oven , just hope you have a tip how I can take the metal piece out . My oven is a Siemens E number HB43MB520B/08 , FD9202000016 many thanks.
This will sound odd, but it works. Make sure all power is off to the oven first. Get a large blob of blu-tak and put it over the bulb that has broken, push it in and twist to undo it. It should unscrew ok then. I know it sounds odd, but ive done this quite a few times and it always works. Good luck!!
@@lords-electrical You said it might sound daft but no it doesn’t once you think about it .I did what you said and hey it came out first time , what a great tip 👍👍
Most of the ovens will use a G9 bulb, and you normally just pull it to remove it. You can tell if it is a G9 bulb as the head is quite small. Try pulling it first and wiggling it a bit if it doesn't come out straight away and then it should remove quite easily.
Amazing how when you make a how to movie there's plenty of access for your entire hand not like in real life. My stupid thing is right up in the corner where you can't get your fingers access & hidden by a none moveable element add arthritis in & it's a real cluster. Your Belling come out good all none used, none slippery or baked in for 50 hours. Try doing my brand new Belling oven that hasn't really been used yet but it's enough to make me look a fool in front of the wife because there's no finger access on my floor mounted oven, so I'm not standing up smiling. Ridiculous design I just can't access the glass case, you can't get your fingers on it. As I said throw in arthritis & damaged fingers & it'll be paying a tradesman $150 to change a light bulb. Thanks Belling, should be named Bellend.
The mother-in-law has a Bosch HBA13B120B and I went around to change the bulb(as it's not working)----It was going to be a simple job (I THOUGHT) --take the racks out/ unscrew the cover/fit new bulb then refit cover---Hmmmmmm----The cover unscrews about 1/2" clockwise then goes solid !!!-----I have tried both hands with a cloth(I am quite strong) and Nothing----It looks like the only solution is a wrench which would probably smash the cover, then dig out the bits and replace with a new one and new bulb----I think the last person who lived in her house, who probably fitted a new bulb--Cross threaded the cover, as one it was loose by the 1/2", it SHOULD have spun off !!!
my bulb has gone, my oven is not new, maybe 9 years old its AEG BP3003021M, im having trouble getting the cover off. any suggestions are welcome, thanks in advance. ♨♨♨♨♨
Not helpful I am afraid- oven is Jon Lewis bulb is in roof g9 type but bulb goes in from back toward front actual socket hidden by contour of roof and element eve with mirrors and camera I can’t do it!
Very useful and informative. I have a Neff double oven and never had to change a G9 bulb before and it was a bit fiddly especially getting the bulb prongs in the right direction. Bit of a tip ensure that when you take the old bulb out check which way the prongs are so it is easier to fit the new one
Great tip thank you 👍
I would never have replaced it in my life without your help👍🙏😊
Great to hear the video was helpful for you, thanks for the feedback Alice
@@lords-electrical I really appreciate the efforts of the people who make this kind of video. For some, it may be tinny, but I avoided the "tragedy" trying to unscrew 😬 the light bulb 😂
Tkank you 👍☺️
Brilliant, one bulb changed. Thank you 😊
ABSOLUTELY LUV YOUR PRESENTATION! SO HELPFUL AND INFORMATIVE!
Thanks so much!
Hi you have a neff hide and slide as your demonstration, could you show how to change the hide and slide lamp.
I want that oven!
Appreciated your video very much. Thank you for posting your tutorial!!
Thank you for clear instructions.....very helpful
very informative thanks for your help
Thank you for a most helpful and concise video.
Glad it was helpful!
Thank you!! Very well explained!!
Hey Thanks for a great simple solution!!!
Could you do a tour of your shop please and could you do more washing machine reviews
Thank you, your so calm!
Video is a great help
Very helpful video. Thank you.
Clear and informative. Thank you.
Either do not touch the new halogen bulb with your bare fingers -or- clean it thoroughly with alcohol before turning it on. The oils from your fingers will cause premature failure....
Good one friend you help me a lot.
Weatinghousw WVE625SSC - Has bulbs in left & RIGHT SIDES. How to replace these please.
Excellent! Do you know which bulb I need for a Lamona built-in single oven? Thanks!
I need to replace the bulb on my Ariston oven model FK898E P X AUS S. It is nothing like the ones you demonstrated as it’s behind a square flat cover. Thanks.
Thank you very much for this helpful vedio
Happy to help
Bought a Bosch single oven two months ago, the bulb has blown already. I’ve used the oven about five times since installation.
Unfortunately it could just be bad luck the bulb has blown. It won't be covered under the warranty as bulb is classed as a consumable item
I have the Neff oven that you start your presentation on just curious to know what bulb is that?
The majority of Neff ovens use a G9 bulb
Thank you very helpful video 😊👍
Can you show how to take the bulb out of the oven you show at the start and end please?
This video is very good but my bombers oven has the bulb in glass chamber in the sides of the oven totally different to the ones shown on here
Thankyou it was a big help.
No problem, glad it was helpful for you
Really good video crucial information.
Glad it was helpful!
I doubt I will get a reply since this video was 4y ago. But is it dangerous to substitute an oven bulb ? The bulb from ceiling fan fits in my oven and comes on when I turn it on with the switch and when I open the oven door. The oven bulb is 15 watts, ceiling fan bulb is 13 watts . Can I use it? Janet Shelton
It will only be suitable if the bulb is capable of being up to 300 degrees C as all oven bulbs are. A standard fan bulb will not normally be suitable unfortunately.
Hello. Very informative and well done. I have a LG LRE30453ST oven that I would like to replace the bulb and get much better light. I know I can't use LED due the inability of the product to handle the oven heat. That said I was hoping you could recommend a halogen or similar product that will upgrade the light output of my oven. Thank you
Wow this is useful having got a new oven with led bulb and a different cover altogether to my old one im now scared to unscrew the glass cover it sounds crunchy !!! So i may leave it and emigrate!!!!! Or ill get neff or oven cleaner guy to do it as i can't even shift the housing so i won't try !!!
I know exactly what you mean by a crunchy sound. It is normally the glass turning on the catalytic liner that makes the sound, but that is quite normal.
Hi, thank u for this video, very useful. Just a quick question... is the bulb going have anything to do with the display screen light going too?
ours is a belling optima 591 about 14/15 years old. the bulb is in the bottom oven and is behind a glass plate at the side of the oven.
looks as though I have to remove the self cleaning side wall lining first
Did not cover regular A15 bulbs in a GE oven?
What about the bulb in the main oven of a NEFF Double Oven U15M52.3GB? Bulb E14,220-240V, 40Watt heat-resistant to 300 degreesC
Very useful. Thank you. Do you know the part number for bulb glass cover?
Thank you
Thanks for making this video. How about for an older oven, much older?
on older ovens, they would normally have a 15 / 25 or 40w ses screw in bulb which are normally quite easy to deal with.
Hi there, I have a Bosch series 8 oven, bulb needs replacing, what bulb would. That be? And is it a pull out?
I have a b57cr22 with the light in the centre like your video shows at the beginning - how do u change the lamp on this please
Thanks. Regards dean
If it is the same as other Neff ovens, the glass cover should unscrew and then you have access to pull the bulb out and replace it. It can be difficult to unscrew especially if it is quite a tight fit.
@@lords-electrical I have the same issue with a B47CR32N0B - have you removed one yourself from this oven model ? thanks!
Hi, have a AEGBPE742320M built in oven, could you pls tell what watt is needed for top and side light pls
Annoyingly i have downloaded the instructions but it doesn't say which bulb to use. The only way to check is to remove the old bulb and check which wattage it is from the old bulb
Hi, I have neff microwave-oven and I need to replace the light bulb and I can’t even see where it is. Neff H7881N2GB/03
Thanks
I have a zanuzzi built in oven does the bulb just pull out if it has prongs or is there a knack of how it comes out thanks
I have a Hotpoint built in oven model number FXQ 06
Easy if your oven is at head height. Not so easy crawling around the floor 😩
I have a NEFF oven model GB-1036.51 HCSG (Yes it is old) on which I need to replace the bulb. The bulb cover is rectangular not a screw on. How do I remove the bulb cover and what bulb should I get please.
I searched AEG competence oven. Which has 2 lights, one at back easy unscrew cover. But, the one the side, I can't get the cover off. How do I change that one!! 🤔
I have nothing on the lightbulb only there is label on the oven. Does B11 help?
Change light on montpellier stand alone oven any help.. Cheers
I have a Stoves Newhome SN60FP and the manual states you have to remove the back cover of the oven? Any advice would be welcome please.
The first oven neff slide and hide, how do I unscrew the light housing ? It’s impossible!
Unfortunately sometimes they can be really difficult to get undone, especially as the glass cover has been heated up and cooled down many times. The main way i have found works is to use a silicone oven glove to undo it. You can get a good grip on it.
Hi, I found the video very helpful, but my oven is an AEG and the bulb is at the front of the oven centre. I have removed the cover but can’t get the bulb out, please do you have any suggestions. Feeling the bulb, I think it may be the G9 shape. Thanking you Elizabeth
I've got a friend with a Rangemast 90 older model oven with a smashed casing and a blown bulb. It feels like the casing is stuck and with the sharp broken points I was struggling to remove it. I don't honestly know if I would need to take the back off the oven if that would help. Any advice would be very welcome, thank you for such a thorough, helpful video anyway 👍
With power off use needle nose players to unscrew bulbs. Did the same for a ceiling fan.
Here I have a G9 460lm. Is it suitable for replacing the original G9 490lm?
It should be ok, as it is the same fitment it may not be quite as bright, but should still work ok.
Hello, we have B27CR22N1B, the other version of the hide and slide. Can you tell me how you remove the cover for it please? Ours won't budge. Thanks :)
It should have a glass cover that should unscrew. Sometimes it can be really difficult to unscrew as the glass heats up and cools down in the oven.
Hi, trying to replace bulb in Miele H5247BP. Help! please
That was a great well explained video thanks very much. I have a Stoves Sterling & struggling to get bulb out. It's a halogen g9 with pins but not sure which either 25 or 40 w. Any tips please. Thanks
Difficult to know exactly but most ovens are normally 25w
@@lords-electrical thank you
Bit late now, but might help someone else. We have a Stoves Stirling 600MF. Search for a bulb by model number and it only lists a £18 sub assembly. I took a picture of the G9 that came out and then zoomed in and tweaked the picture settings. Ours was 240V 42W Hungary GB F3. 42W seems like an oddball but more than happy to put a 40W back in.
Could you show how to change the bulb in a Neff B57cr22n0b pls
How to change a bulb for Miele H212 oven? Can you please let me know? Thank you.
Wish I had seen this first. Unscrewed the glass bulb cover on my hotpoint oven. Didn't know what bulb was in there. Pulled on it, bulb broke cutting my finger. Not sure if one of the little silver parts is still in there. Not sure what to do.
Oh dear, hope you are ok. First of all you need to see what kind of bulb it is, either screw in or just a pull out type bulb. Do you have the model number and i can have a look. If the bulb has broken, there is a good chance that there is still part of the bulb in the bulb holder.
How to replace fisher and paykel microwave oven's globe ?
Great video but I cant get the glass undone on my Electrolux oven suggestion please
Unfortunately on a lot of ovens, when the oven is heating then cooling the glass cover, it can make it really difficult to get the cover off. Not really a lot of advice on this, all i can say is try and be careful not to break the cover.
Same as, can't get the glass cover off.
Why can't the video be updated to show how to get a stiff cover off?
same here with my westinghouse (electralux) looks to be a digferent size to that of the universal globe tools :(
@@dawncarrington6055 squirt some wd 40 on it and leave for 15 minutes. Worked for me
Hello, do you know what bulb I will need for a Siemens microwave CM633GBS1B/11 please?
Hi brill helpful video do you have the candy rapido washing machine in your store if so could you review
Bulb cover removal very difficult.
That is correct sometimes they can be difficult to remove
Hi just seen your video so I think you can help me . When I unscrewed the bulb out of the oven it came out leaving the threaded part in the oven , just hope you have a tip how I can take the metal piece out . My oven is a Siemens E number HB43MB520B/08 , FD9202000016 many thanks.
This will sound odd, but it works. Make sure all power is off to the oven first. Get a large blob of blu-tak and put it over the bulb that has broken, push it in and twist to undo it. It should unscrew ok then.
I know it sounds odd, but ive done this quite a few times and it always works.
Good luck!!
@@lords-electrical You said it might sound daft but no it doesn’t once you think about it .I did what you said and hey it came out first time , what a great tip 👍👍
Whirlpool akp261 electric oven bulb replacement needed would it need a g9 bulb and also do they just pull out or do u twist them?
Thanks
Most of the ovens will use a G9 bulb, and you normally just pull it to remove it. You can tell if it is a G9 bulb as the head is quite small. Try pulling it first and wiggling it a bit if it doesn't come out straight away and then it should remove quite easily.
How do you remove the bulb cover from the neff slide and hide oven? As the glass cover is in between the grill element?
It is quite fiddly but it has a cover on it that you need to twist off then pull the bulb out
Ordered the tool to remove bulb cover but it won’t shift ?????
Amazing how when you make a how to movie there's plenty of access for your entire hand not like in real life.
My stupid thing is right up in the corner where you can't get your fingers access & hidden by a none moveable element add arthritis in & it's a real cluster.
Your Belling come out good all none used, none slippery or baked in for 50 hours.
Try doing my brand new Belling oven that hasn't really been used yet but it's enough to make me look a fool in front of the wife because there's no finger access on my floor mounted oven, so I'm not standing up smiling.
Ridiculous design I just can't access the glass case, you can't get your fingers on it.
As I said throw in arthritis & damaged fingers & it'll be paying a tradesman $150 to change a light bulb.
Thanks Belling, should be named Bellend.
how do you take the clap off?
The mother-in-law has a Bosch HBA13B120B and I went around to change the bulb(as it's not working)----It was going to be a simple job (I THOUGHT) --take the racks out/ unscrew the cover/fit new bulb then refit cover---Hmmmmmm----The cover unscrews about 1/2" clockwise then goes solid !!!-----I have tried both hands with a cloth(I am quite strong) and Nothing----It looks like the only solution is a wrench which would probably smash the cover, then dig out the bits and replace with a new one and new bulb----I think the last person who lived in her house, who probably fitted a new bulb--Cross threaded the cover, as one it was loose by the 1/2", it SHOULD have spun off !!!
How to change bulb on a Hoover oven please?
Aren't you suspose to unplug the oven first to prevent frying your fingers?
Most homes have a switch to cut off power to that outlet
Hi I have NEF B57vR22nob hide & Slide oven could you help with the bulb part number and instructions please.
Normally neff ovens are 25w G9 bulbs like in the link of my video, but may be worth just checking to make sure by removing the old one before ordering
@@lords-electrical thanks for the reply
siemens oven E Nr HB13AB550B/61 please tell me how do I replace the bulb?
Change light bulb in GE oven
0:12
my bulb has gone, my oven is not new, maybe 9 years old its AEG BP3003021M, im having trouble getting the cover off. any suggestions are welcome, thanks in advance. ♨♨♨♨♨
Sometimes they can be really difficult, but i have found using some blu tak around the edge of the glass can really help to get the grip on it.
How to change the bulb in an IKEA oven
Mind is am IKEA oven
The oven that you’re standing next to at the beginning and the end of the video is my oven, but you never showed how to change that one 😞
The cover just won’t budge. 😩
The glass cover on mine will not come off. No matter what
Sometimes if the oven has been used a lot then they can be difficult to remove unfortunately
Not helpful I am afraid- oven is Jon Lewis bulb is in roof g9 type but bulb goes in from back toward front actual socket hidden by contour of roof and element eve with mirrors and camera I can’t do it!
%
No Zanussi...