[Ma.K.] Raccoon detail improvement work, Maschinen Krieger WAVE plastic model production video ②
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- Plastic model # Maschinen Krieger # KowYokoyagama # PLAMODELDAYS
This is a production video of Maschinen Krieger "Raccoon" 1/20 plastic model (WAVE).
In this video, we recorded the whole process of removing basic seams and installing screws using chamfering bits.
Please feel free to send us channel registration, evaluation button, comments, questions, etc.
Please see below for kits to use.
[Use kit]
S.A.F.S. type R Raccoon
■Plastic model kit
■ 1/20 scale
■ Snap-fit type that does not require adhesive
■ Marking decal included
■ Appearance work: Maschinen Krieger
■ Product code: MK-069
amzn.to/3QZJPAB
It's a good kit that's easy to make.
Drilling is required, so it is convenient to have a pin vise, or a drilling tool is almost essential.
Snap-fit kit (no glue required)
SAFS joint mods
amzn.to/3AO9hCJ
Pink Tank: Modified parts by PINKTANK.
This is what is said to be short in the video.
I often use it because I can create a silhouette that looks like a WAVE suit with a lower center of gravity.
[Tools and tools used]
Electric file Ultima 5
amzn.to/3Ahhv5U
If you don't have this, the work time and the degree of loss of concentration will be different.
it's recommended. It's a little pricey, but it's worth it.
God Yasu
amzn.to/3QZeG0m
Works well with the Altima 5.
When using other sponge files, the sponge often broke and did not work well.
Suitable for wet sanding
Nippers God Hand
amzn.to/3KiRhVy
Nippers are god hands.
I use nippers for beginners. The one with the Keroro Gunso logo looks like a pre-value, so it's good for beginners.
Higher is better, of course.
Tamiya Craft Tool Series No.94 Precision Saw
amzn.to/3KTxA6T
It is an etching saw that cut off the finger parts in the video.
It's just that I can't use it, but as a tool it's excellent and sharp.
It can also be used for resin streaks.
pin vise
It is convenient to have one large and one small.
Fierce men have a few millimeters of the tip
Gradually, the chuck (mounting part) became loose, so I bought a new one this time.
Tamiya Craft Tool Series No.50 Precision Pin Vise
amzn.to/3wY4NbE
Tamiya Craft Tool Series No.112 Precision Pin Vise D-R
amzn.to/3wWwf9s
Tamiya Craft Tool Extra Fine Drill Blade Set 74044
amzn.to/3QieCYN
Tamiya Craft Tool Series No.108 Precision Tweezers (Round Tip/Twin Neck Type)
amzn.to/3THTPkc
It is the tweezers that missed the code in the video.
The tweezers themselves are also very good.
It's just that I don't know how to use it. Near the end of life.
Adler's Nest Extra Fine Lead Wire Diameter 0.65mm (White) 2m
amzn.to/3QhaIzl
Very thin code.
I often use.
Tetra brass wire 0.5 x 250 mm 10 pieces
amzn.to/3TL6nra
It is easy to bend and creates a delicate atmosphere, so I use it a lot.
In the 1/20 world, is it 1 cm in diameter?
chamfer bit
shop.godhandto...
Direct sales limited to God Hand.
In the past, individual Haikyu parts cost a few hundred yen, but there are very few of them on the market, and even if they do, they are priced at a premium.
You can buy God Hand's chamfering bit set at a price that is about the premium price, so this is a better deal.
HiQ Parts Minus Mold 2
amzn.to/3cZhpIU
Detail up parts for the screws used in the video.
There are various sizes, so I'm not sure, but in the video, I used one with a head diameter of 1mm to 2mm.
ご視聴ありがとうございます。
また新しい動画もアップしていきますのでチャンネル登録宜しくお願い申し上げます。
Great! Really fun to watch. And a very good idea with the open hatch. I think i need a second racoon to steal this idea :D
Please make a hatch open type raccoon and add it to your collection!
Wonderful Work! And so amzing Thinks! Unfortunately, they don't exist in Germany, just like the pistol muzzle!
Thanks for your comment.
Getting small parts for models is often difficult.
Please enjoy your model life.