Silent Hitch Pin-SHP2040 Anti Rattle Pin: New Design Enhancements
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- New design enhancements to the popular Silent Hitch Pin 2040 locking anti-rattle device for 2 inch hitches: hubs.ly/H09s_z70. Let's Go Aero patented technology with an all new 90-degree lock angle for fit on ever smaller OEM hitch spaces.
The Silent Hitch Pin’s spring nut coil holds the nut tight in the tow accessory shank and is portable to fit with any hollow 2-inch ball mount, cargo carrier, bike rack, or hitch step for a stable and distraction-free towing experience. The Silent Hitch Pin’s improved design keeps your hitch accessory on secure lockdown with greater convenience than ever before with a self-lubricating and anti-corrosive chrome finish.
Buy the Silent Hitch Pin online: hubs.ly/H09s_z70
Visit our FAQ Page: hubs.ly/H09s_700
Have questions? Contact our product experts: hubs.ly/H08SjWR0
Need support? Contact our support staff: hubs.ly/H08ShFx0
I just purchased one of these and WOW, this thing just works, period! I have a 4x4 Labs rear bumper on my FJ80 and the typical hitch tightening brackets don't work with that because there is nowhere for the bracket to push against (based on the design of the bumper). So glad I found this, installed in seconds and no more play in the hitch!
Glad to here its working great for you!
I use this on a regular basis for light towing and it works great.
Can't use that on a GM with the multi junktion tailgate. can't drop that gate with a ball mount installed, great engineering GM
Quick slide of the hand and wala " see it works ! I didn't see him trying to move it like he did the first time around!!!
Voila.
Good luck getting it out again
Hi Peter, Sounds like you had some issues with your pin. We would be happy to help if you would like to give us a call at our office 719-630-3800.
Why don't the tow bar manufactures make the hitches without the slop.
Too close of tolerance. Would need a hammer to insert.
@@ralphieterry and they never come out without an OXY Torch ,,,, had many many like that ,,,, I use the U Bolt clamp ,,, best yet
Because the tow hitch has to marry up with products from other companies out of the control of the hitch manufacturer, and vice versa.
He shook the regular bolt violently but didn’t shake the silent pin at all :/
I can understand that it may look that way in the video but the Silent Hitch Pin when tighten simply does not shake so there isn't much to see.
need one for a 3 inch receiver
No problem! You can find the 3in version on our website here: letsgoaero.com/silent-hitch-pin-5-8-press-on-locking-anti-rattle-pin-for-2-hitches/
That only works on side to side movement. Add a U bolt style hitch clamp for total lock down.Up and down needs more for real world use. I drive my truck off road daily with a heavy load on the hitch. This is only half of the add ons needed for long term use.
And if it is a solid hitch vs hollow?
The Silent Hitch Pin is only for hollow shanks. We are currently working on a product for solid Hitches but it will likely not be available till 2020.
They are great & do everything you say they do but they are not very strong, not only this brand but all of them. They should make the locks out of High Tensile steel instead of brass. If you grab the lock end with a big pair of decent Multi Grips while the pin is still done up tight and twist or hit them with a hammer the locks just fall apart. Its not all that noisy or difficult to do & it takes 30 seconds or less. Lose your keys and you will see what I mean when you try to get the pin out. I am sure the thieves know about this by now too.