Knife Customizing - Cold Steel 4 MAX Scout W/Fat Carbon Scales!!!
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2021
- In this video I customize a Cold Steel 4 MAX Scout with some Fat Carbon Blue Dark Matter for a supporter of the Channel! Enjoy the video and don't forget to subscribe, thank you!😁
#coldsteel #fatcarbon #darkmatter #custom
Instagram: Knathansknives88
Check out my Merch and Custom Goodies here!
www.knathansknives.com/
Check out Fat Carbon here!
fatcarbonmaterials.com/
Get the Cold Steel 4MAX Scout here!
amzn.to/3t1eYNl
Here's links to some of the tools I used in this video!
Dremel:
amzn.to/3zJb21j
Sanding Drums:
amzn.to/2XLb0J8
Drill bits:
amzn.to/3kBZUPC
Ceramic Pellets:
amzn.to/3DHerAu
Ferric Chloride:
amzn.to/3aAlmPh
Lansky Sharpening System:
amzn.to/3ADBVoa
Carbide Square End Mill Bits:
amzn.to/3pJ6pTT
WIHA Bit Set:
amzn.to/3EC0nIs
CRKT Hex Bit Driver:
amzn.to/3EHSEsg
Kungbar DC Power Supply 120V:
amzn.to/3nPh3GK
Drill press:
amzn.to/3NxW0Dh
Safety Work Gloves:
amzn.to/440RxRw
Safety Glasses:
amzn.to/3qRiyJ7
Ceramic Triangle Pellets:
amzn.to/3Ji2je8
Sainsmart Genmitsu CNC:
amzn.to/3Ppb8p0
Tung Oil:
amzn.to/46r2DRa
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 4 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/_vK_cden2f8/mqdefault.jpg)
The owner of that knife is going to be jumping for joy once they get that knife in hand. Love the whole process being filmed in the way you do it. Beautiful and functional just how every knife should be. Keep making sharp things fun and enjoyable.
I hope so!😁
Thank you, I appreciate you watching and the support! I'll keep them coming! 🤜💥🤛
This modification turned out so sick! I really like the edits! The music was chill and it was fun watching! Thanks so much for taking the time to film yourself making these mods, this video turned out beautifully! 🤘🏽
Thank you so much and you're very welcome, that means a lot!🙏🙏 I'll keep them coming! 😁
@@KnathansKnives can you message me
I’d love to see you do a 4max scout in any type of metal scales, either brass, copper, titanium, or even steel. Yes it will be heavy as hell but it would be a tank of a knife haha
😁
Love the look. Only thing I would change if have all the screws washed to match. Awesome job!!
Thank you! I agree with you and I just recently found replacement screws that are all black and T8's😎
@@KnathansKnives awesome. Would you mind sharing the link?. I'm thinking about doing one and would like to do that upgrade. Thanks
No problem. Only thing is that the hardware I found requires purchasing a Civivi Pocket Clip but here's the link:
amzn.to/43KSkqQ
That’s absolutely stunning work !
Thank you very much!
YESS! Awesome job Man! Beautiful. You’re movin’. Enjoy
Thank you!🤜💥🤛😁
@@KnathansKnives 👊🏼🤩
That mod made it 100x better looking!!!!
Thank you!
Superb, smooth and excellent... love that 4 Max Scout! ❤
One of my favorite Cold Steel knives! 😁
The best work I ever seen in my life!!!!!!
WoW, thank you very much!🙏🙏
@@KnathansKnives I’m still trying to get to you and believe me I am!!!!! I just have some stuff going on right now with unexpected stuff but everyone knows me on TH-cam I just didn’t want you to think I’m bullshittin you and I’d like to send many your way!!!!! I’m keepin a close eye on you I’ll be sending something your way soon
No worries! You have plenty of time! I'm backed up for a while. 🙂
Great job! I really enjoyed watching this!
Thank you very much! 😁
I close most of my Cold Steel with one hand especially anything with a coil. You just have to have your first finger close to the choil when releasing the lock bar. Let it drop to the half way position then move fingers and then give it a shake and let the weight of the blade drop and the back spring suck up the blade. Long explanation but I have literally done this for more than a decade without any issues or cuts.
Edit:. Sick mods you got me wanting to get some more tools and do mine that way. Hopefully JimiSlash was good for business I definitely subscribed because you are great at what you do and your videos are awesome too!!
Thank you for the tip!
Go for it, it's a great learning experience!😁 Yeah, Jimislash is awesome for giving me a shout out and liking my work.🙂
Now that's a gentleman folder 👍
Ha! Definitely, a great steak knife!😉😁
Превосходная работа !!! ;)
Thank you very much!
Very well done.
Thank you very much!
That carbon fiber is NICE!!!...BRO u got skills
Thank you! Yours is coming! 😁
Those blue accents in the fat carbon scales are gorgeous!! Beautiful work brother 🙂✌️❤️
Thank you brother! Love this material! 😁
Hello. That fat carbon is just pure magic. All the best
😁🤜💥🤛
I may have to send my Italy 4max to ya. More solid work turning cold steel knafs into art.
Sounds good and thank you! 😁🤜💥🤛
That looks lovely
Thank you very much!
Spectacular
Thank you!🙏🙏😁
Looks awesome. I just ordered the dark matter green. Can’t wait to put the scales I make on my 4 Max elite. I’m hoping the g-10 scales will match my 4 max scout and I can just transfer them over.
Thank you!
Nice! That's going to look good! 💯💯
Awesome!
Thank you! 😁
so beautiful🎉
🙌🙌
I dig the contrast between the shiny scales and matte blade. Not a combo you see often, but it looks great!
Thank you very much!😁
Hello,
I am in Love! Looks really fantastic!
Great Job! Greetings from Germany
Harald
Hello and thank you!🙏🙏
Good Job
Thank you!
Bro thats frickin killer!a
🤤🤤🤤 wooow just wooooow!!!!!!
😁🙏🙏🤜💥🤛
Looks great.
🙏🙏😁🤜💥🤛
Wow just wow beautiful. You do amazing work!
Thank you very much! 🙏🙏😁
That is stunning
Thank you!🤜💥🤛
You made this better than the original 4max
Thank you very much! 😁
Very good work !
Thank you! 🙏🙏
Amazing work
Thank you!😁
Very cool
Thank you!
Crazy!!!!
🤜💥🤛🙂
Oh hell yeah. I love the 4max. I'd love to get the scout as well. Excellent job.
Thank you! 😁🤜💥🤛
That's just badass dude!!!! Great work 💪
Thank you very much!🤜💥🤛😁
Love that fat carbon! Another awesome job! Great video 👍
Thank you! Wait until you see the Raindrop CF!😁😎
Good stuff
Thank you!
You make that look so easy 😂 Another great looking mod! Those scales are awesome
Thank you! I try but I usually edit out the mistakes I make.😉
That’s Looks Bad Ass!!! Your work is Awesome!!! Can’t wait to get my para3 Done !!!
Thank you brother! 🤜💥🤛
Beautiful work my friend love get some scale from you
Thank you very much!
Soon😁
awesome video! youre totally inspiring me to customize my own knives!
Thank you!😁 Do it! 🤜💥🤛
Turned out really nice! 👍 i never seen a modded cold steel knife..love it!
Thank you very much!🙏🙏🤜💥🤛
Freaking gorgeous! I don’t even like CF but that is something I would be proud to own! 😍
Thank you very much!🙏🙏😁
Nice job 💪
🙏🙏😁
Tjek my custom jobs 😊
🔥🍻
😁🤜💥🤛
🔥🔥🔥👍
🙏🙏😁
Absolutely Loving this!! I Assume you can do this to just about any knife.. I wil like this on the AD 10 Tanto!!
Thank you! I can do it to almost any knife🙂
That's a work of art! I do love the Stonewash that Cold Steel does, but the etch looks fab!
Thank you very much! 😁🤜💥🤛
I screwed up the first pivot hole. The problem, that pin has the flat top, a recess below flat top, and the smaller shaft. I screwed up the hole when I tried to counterbore that second recess. What bits did you use? I’m having a lot of problems with this one just using a drill press like you did.
I actually have one of these, I'd love to get a sick looking mod done on it like that
Once my books open back up we'll make it happen 🙂
Well I’m done with my scales. Is there anyway I can send you a photo? Without your awesome tutorial, this project would have probably been more expensive.
Awesome!
I think Instagram or email(contact@knathansknives.com) should work with sending a pic🙂
That's awesome! I think if I send you more knives I'll have to let you pick the materials.
Thank you! Your Code 4 will be finished very soon!(Apologies on the wait).
@@KnathansKnives No rush! I am definitely thinking about sending you a few more knives though if that's okay.
That would be alright, the wait time increased, just a heads-up🙂
Beautiful stuff man. I've been thinking about getting different scales from my k390 Spyderco police 4 lite . Any suggestions?
Thank you! I would definitely recommend Dark Matter, G10/Carbon Fiber, Brass/Copper and maybe a stabalized wood?🤔
Man I didn’t know you had these abilities!! I seen a Pilar video the other day but man you can do about what you set your mind to. Been wanting a set of micarta scales for my cold steel AD-10 for a while. When the books open back up please let me know.
Thank you very much! 🙏🙏
Please contact me through email(contact@knathansknives.com) or DM me on Instagram and I can put you on the wait list. 😁
Remarkable work. I'd be interested if you could do a similar mod to my 4 Max DLT model.
Thank you very much! I'm sure we can make it happen🙂
Curious why you didn’t blacken the screws…
I’m currently in the process of drilling and cutting. I bought the dark matter green. I was a little pisses when I got it from Lithuania. The 6” piece I got wasn’t cut square and I’m 1.5mm short on one side- given that the scales are 6” wide, I’m gonna have to get creative. Anyway, great job it looks great. I’m enjoying my project as well.
Unfortunately I'm not able to blacken hardware yet but I'm hoping to figure something out soon.
Nice, bummer that the material came to you in that state, I hope to see the finished scales!🤜🤛🙂
Its really nice, especially the the scales. If you haven't already checked out locktite 222 (purple) you might want to check it out.
Thank you! I'll check it out! 🤜💥🤛
As always the mod turned out great! I bet you go through a lot of thick gloves on those bench grinders don't you?
Thank you!
Surprisingly no, I'm just extra careful around it🙂
👍🏽‼️👏🏽👏🏽👏🏽👏🏽‼️
🙏🙏😁
I'm in love😍
Ha! Me too, after working on this blade, I'm definitely going to get one!😁
Got mines in today! STOKED 😎
@@MrIanstein808 Sweet! How do you like it?
Megaladon of a knife! Couldn't be happier...my new edc...
What are your prices for a custom build? I'd like to get a knife done by you....you're on your way to the top buddy🙌🏾
I’m having some issues with the “D” pivot pin. My standard and metric bits aren’t exactly the right size. What bit sizes are you using? Thanks.
The D-shape hole is a tricky one, before I had my table top CNC I would do it by hand.
I would Drill out the counter sunk area first, then drill out the center hole using a smaller drill bit(make sure it's smaller than the OG pivot hole), then use small files to create the D-shape hole.
Time consuming but it works🙂
The problem with this pivot is there is really three different size holes. Under the flat top, there is another small lip larger than the shaft. I’m having a hell of a time with this- maybe I’m being too anal about it, but I’m not getting it to fit right. Since the whole centering of the blade depends on this pivot, it’s gotta be done perfectly imo.
Wow , you are very talented I am very impressed by what you can do with simple tools like this , are you selling some of those knives ?
Thank you very much!
I currently have the Red G10 Liner AD-10 up for sale.🙂
Great video amazing work looked great what do you charge to do that
Thank you! Email me(Knathansknives@yahoo.com) or DM me on Instagram and we can go from there. Appreciate it.🙂
Omg , you work great with that stuff! Do you do custom work? I have the same knife, would love something similar. 🤘
Thank you very much! I do custom work but unfortunately my books are currently closed.🙁
@@KnathansKnives I completely understand! I found your website and I've been keeping an eye on things. Life gets busy, take care of yourself my friend.
@Apex Alchemy Appreciate it and likewise!
Any scales for the 4 max in stock? Looking for Manix 2XL as well.
Unfortunately not at the moment but hopefully soon! 🙂
Very professional how much do you charge to do design's
Thank you very much! Please email me(Knathansknives@yahoo.com) or DM me on Instagram(Knathansknives) and we can go from there 😁
Another amazing job. Where did you get the carbon fiber from?
FatCarbon is the manufacturer of that material. It is called darkmatter carbonfiber on their website.
Here you go!😁
fatcarbonmaterials.com/
Customer is left handed?!! Must be Jimislash!!! Cold steel custom? Yeah got to be!
Good guess, but no.😁😉
Ahhhh well I know Josh has one of the nicest cold steel collections Iv ever seen! He’s also one of the nicest guys Iv ever spoken with as well.
He really does, ones I've never heard of.🤔 Great guy for sure!🤜💥🤛
Great job can you do scales for my code 4?
Thank you!
I could do your Code 4 but my books are currently closed, however I do have a waiting list.🙂
want to do mine too? lol
maybe I'll try my hand at some scales since I can't find any for sale for the 4max scout
I'll hopefully be making some more for the site soon!
If you end up making your own I'd love to see them!🤜🤛
@KnathansKnives haha forsure, gotta save up a bit first to get the equipment necessary so don't hold your breath, can I ask what chemical you used to darken the blade and liners? can't really find much info on patinas for stainless steels
I like to use Ferric Chloride:
amzn.to/3peFz89
@KnathansKnives I see, thanks man!
Crazy Dope Bro...how much you charging for this collaboration ??
DM me on Instagram(Knathansknives) or email(Knathansknives@yahoo.com) and we can go from there, appreciate it.😁
I need a set of scales for my scout 🥺
I'm hoping to create some with the CNC to sell on my website😁
@@KnathansKnives please do 🙏🙏🙏 you're work is amazing!
Thank you!
Wow! I wish more makers would do more after market parts Cold Steel knives.
You hardy see anyone doing scales and mods for Cold Steel.
Why is that?
Thank you!😁
Honestly, I have no idea, there such popular knives.🤔
I guess that's where I come in.😁😎
@@KnathansKnives do you think you could a Recon 1?
Definitely! I've done a few already.😁
So using the calipers, I got these measurements for the D-pivot pin:
.35=11/32- top
.27=9/32- step down from flat top
.23=7/32- shaft
I think were I screwed up, I tried to counterbore the top and step down then drill for the shaft. I probably don’t need to drill for shaft.
Sorry to bother you with this, but you did a phenomenal job on your scales. Any help here would be greatly appreciated. I’ve made many aftermarket scales for my full tang knives, but this is my first folder attempt.
I see and no bother at all🙂
So you did the counterbore first, which is correct. I drilled the smaller center hole a little smaller then the original and then slowly turned it into a D-shape hole with my small hand files.
I hope that helps.
@@KnathansKnives That is where I screwed up. I drilled it to size, and when I cut the notch it was too big. I think I’m happy for the screw up. I didn’t really like the green dark matter so I ordered some 80’s camo carbon. I’ve already blacked the hardware and stonewashed, and have the two rough scales cut out and drilled. The colors on this 80’s camo are sick!
I see, you could always order some G10 and practice on that, cheaper.
I hope the 80s Camo turns out perfect! 🤜🤛
@@KnathansKnives Thx. I practiced on some plywood this time to make sure the holes were right.
Nice!
Hey man, if I wanted to thicken and round my scales for my Cold Steel FinnWolf, is that something you'd be able to do? I'd love to promote you on my channel as well.
I believe I can do that for you!😁 If you'd like you can email(Knathansknives@yahoo.com) or DM me on Instagram(Knathansknives) and we can go from there.🙂 What's the name of your TH-cam channel?
Hi, I love the work! I don't have a CS 4 Max scout yet, but I would like you to do the same for me, but dark matter green. Let me know how much please.
It's an awesome knife! I can definitely do that for you. Email me(contact@knathansknives.com) and we can go from there, appreciate it🙂
How much would you charge for the same scales? 4max Scout.. Thanks
Message me on Instagram(Knathansknives) and we can go from there🙂
What’s your email? Sorry I don’t do instagram as a matter of fact. I also turned of my FB over a year ago.
No worries.
It's contact@knathansknives.com
That finish is beautiful. 😍 Just curious what would thet cost for one of those be?
Thank you!
Price would depend on material but starting around $160-ish🙂
@@KnathansKnives thanks for the reply. Appreciate it. 160ish whats the steps to have one done?
@@julian8229 I'll need the knife itself(for that perfect fit) plus material.
Just a heads up my books are currently closed but I'm hoping to open them up in a few months.🙂
@@KnathansKnives dang well it is what it is. how can I try and get a spot for the next book opening? Thanks for the advice and help.
I'll announce it on my TH-cam channel when they open back up and how to get a spot 🙂
Do you sell this type of scales? I need one for my 4 max scout! Where can I contact you?
I do, I create scales made to order. Unfortunately my books are currently closed but I'm hoping to have them open in a few months🙂
Here's my email(contact@knathansknives.com)
светлая фурнитура косяк
🤜💥🤛
How do I get in touch with you I want that done to mine
Here's my email but just a heads up my books are currently closed. I'm hoping to have them open soon.
Contact@knathansknives.com
How long is your waiting list? I'd like my 4Max Scout with Fat Carbon Red Dark Matter Scales.
My waiting list is about 6 months out 😕
@@KnathansKnivesBummer. You do GREAT work. I love the way the 4-Max Scout came out.
Kinda late and idk if you gonna see my comment but forged dark matter is not that hard to work compared with colored ones. On colored ones the hardest one to make is copper dark matter. It's easy to make, but final result not always looks like the one that you worked with here the blue one. Can confirm because I make these plates.
Edit: grammar. English is my second language
No worries 🙂
I agree, it's simple to work with but it chips too easily with the tools I use😕
@@KnathansKnives if you ever get a chance try gold dark matter. That one should be nice to work with and also looks amazing. One guy from Russia, aramis akhmedov, regularly orders copper gold and some other colors but these two colors are the main ones that gets sent to him
Been trying to get ahold of you how can I do so. I tried insta and email
That's really strange.🤔 What were you thinking of getting customized?🙂
Sell me some of them scale dude 🎱 if you can 💰🎃💰🎃💰
You may as well make a few bucks of your craft ☺️
I take custom orders on creating scales😁
Can I buy some?
I'm working on trying to produce them on a larger scale🙂
Nice!
@@KnathansKnives I would even send my 4 max scout to you ….
@@demo2952 Unfortunately my books are currently closed but once they open back up we can make something happen 🙂
@@KnathansKnives any word on the books?
How much and take my money???!!!!
Ha! Appreciate it Will!🤜💥🤛
For me at the moment, this is the worst knife, not that the others were bad, but I just wanted to have this one right away, I'll probably buy myself one
I'll be getting one soon as well!😁
get rid of the liners ,unnecessary /G10 or carbon !
👍
DAM THATS A SWEET CS 4MAX SCOUT !!!! I was thinking of kinda doing the same as you my good man ! I was thinking of black g10 for the handles . Linners od green , Lock Bar od green . If you get chance pm me back on here plse ty
Thank you very much!
Those would be great MODS🙂
hey nathan i am lookin for the ad-10 , would you have one by chance ?, if yes PLEASE message me and let me know , talk soon bro > tom !
Hello Tom!
I'm currently selling one at the moment🙂
@@KnathansKnives right now i can only trade knives for it, would you entertain that maybe ?, thanks bro > tom !
@tom quirin Unfortunately not trading at the moment. Maybe in a few months🙂
@@KnathansKnives ok, yes, let me know, could/would entertain that route with you possibly ?, talk soon > tom !
Dude you are phenomenal and very gifted! I love your work and content, absolutely. We talked earlier on Instagram, I am Gavin Stewart. And I was wondering, if you don't mind me asking, how much do you usually charge for the work you do on your projects such as the 4 max scout you did on this video?
Thank you very much! I sent you a message on Instagram.😁