It appears Lynx has ignored the sag for the front suspension? @Lynx Snowmobiles, what is the recommended sag for the front suspension? Can not find it in the owner's manual (Xterrain RE 900 Ace Turbo R).
Hopefully they give you a proper answer but I’m pretty sure you need to run a minimal amount of preload in the front (back it off until the spring loses tension while off the ground)
Adjusted the front today on my Xterrain 900T 2020, with those stock 22nm springs rate you need 15-20mm preload (a lot yes) for 40-50mm free sag on the front with rider on. I adjusted to 40mm because I want the skis as light as possible. Aka higher front to move the center weight point further back. Stock settings 5mm preload free sag at the front is a lot maybe 80-100mm to much in my book. Test ride tomorrow!
same same 85-95mm sag. try to firm the spring or try buy the stiffer one :) I have the 3700 RE and im gonna check my suspention next week, 5" way to soft :D
I wish I saw these at the beginning of the season. Can't wait to try the sled with a new set up
Good work Janne!! 👏
What is suggested sag value for the PPS2 suspension?
What should sag be on boondocker ds ?
It appears Lynx has ignored the sag for the front suspension? @Lynx Snowmobiles, what is the recommended sag for the front suspension? Can not find it in the owner's manual (Xterrain RE 900 Ace Turbo R).
Hopefully they give you a proper answer but I’m pretty sure you need to run a minimal amount of preload in the front (back it off until the spring loses tension while off the ground)
Adjusted the front today on my Xterrain 900T 2020, with those stock 22nm springs rate you need 15-20mm preload (a lot yes) for 40-50mm free sag on the front with rider on. I adjusted to 40mm because I want the skis as light as possible. Aka higher front to move the center weight point further back. Stock settings 5mm preload free sag at the front is a lot maybe 80-100mm to much in my book. Test ride tomorrow!
Is there a recommeded sag for the lynx brutal?
What sag do you guys recommend for the shredder re
85-95mm
Can you do how to setup on the shedder ds 4100. Mine has way more than 4” of sag with me on it I would say at least 5”
same same 85-95mm sag. try to firm the spring or try buy the stiffer one :) I have the 3700 RE and im gonna check my suspention next week, 5" way to soft :D
Does anyone have a part number for the heavier rear spring 65NM ?? I called 2 dealer in my area and they both cant find it ?! On Xterrain RE 900R 2023