Convert fuel economy gauge to oil temp on BMW E90
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- Yes, fuel economy is important to know and track but its in the gauge cluster, both average and instantaneous. If you don't have it, it can be easily programmed. A dial fuel economy is very annoying; but oil temperature is very useful. Especially if you take short trips in the cold you will realize you won't necessarily reach 100C which is necessary to burn off water vapor. Or if you drive on hot days or track the car, make sure you are not running the oil temperature above what the oil is rated for. You should aim to run the oil temp from 110C to 125C and never exceed 150C with a synthetic
1. You must have BMW EDIABAS 7.3.0 installed and have a K+DKAN Cable. You can find cables on eBay, amazon and Bimmergeeks. The Bimmergeeks cable is the best especially if you do programming. There are various sites with the BMW tools software.
2. Download Perfekt Toolbox
toolbox.mrperfe...
In the video I will show you how to use Perfekt Toolbox.
Thanks for watching and please subscribe and share.
Hi guys, there is actually a easier way to do this and it's even for anyone driving a BMW E-series, it's a new beta feature in Carista! I’ve been using it for a bit, and it turns the fuel consumption gauge into a real-time temperature monitor. You can even customize the temperature range that shows up, which is super handy.
What I love is that you don’t lose the fuel consumption display either - you can just move it to the center screen by pressing the BC button, so you still have both pieces of info right there.
Honestly, it’s been a game-changer for me. Definitely worth checking out!
It works perfectly! Thankss man good new function!!!!!!!
Pd: Ive got a 320i E92 N43
Does not work ok N47, E90 320D. Needle does not rize.
Works like a charm with 330d M57. Only minor issue is that gauge doesn't point exactly to zero on ignition start.
you can change that with this
@@czr4140 what year is your car btw ?
Are you sure it the oil temp and not the water temp?
Did you figure it out? I’ve set the offset to 0 on mine and that way it works perfect
@@LighthouseBaptistChurchAlmere it's water temp, i stand corrected
Work perfect on M57n2 thanks Im so happy for that 🙏🙏🙏🙏🙏🙏
can you Upload this programm? download links are down..
thanks for sharing this! Confirmed working on X1 e84 though had to change values for motor steps to 0 560 1120 1680 2800
can you Upload this programm? download links are down..
Why would they ever put the l/100km Guage...it's super annoying bouncing all around
hi, the link is broken, can you tell me how to download it some other way? thanks
Thanks! Great video. Does this work for E60 as well?
Hello, Installation ok on 330D E90 2008, but needle shifted from zero, which has correct settings please
great vid. spot on with the usless gauge remap
works for me, thanks!!! im owner of a 320i lci e90 2010 (n46 engine)
Got yourself a new subscriber sir! Why not setting it to 0 to 150degrees?
I can't download the program, because the link is not opening
So can i just download the perfekt toolbox or do i have to have the bmqw software too? you didnt use it in the video so im curious to understand why i need that too
Thanks a lot. Works just fine.
Can you make a video that show how you convert speedo to 280 or 300kmt? I belive you can do that whit this program also.
Hi are you able to convert it to water temp so you can see if the car is having overheat
That would be great
Thanks! This works like a charm 👍
can you send me a pic on display after you set the oil temp
Any idea if this can be done using bimmer code on a n47 engine? At least deactive that very annoying econometer
Thanks 👍👍👍
Great video
Will you show how to add the digital speedometer to the KOMBI?
Also how do the backup files work? Is there a function on the perfekt toolbox to load up the backup files?
Thanks,
Yes I plan to if there is no other videos
Does this also work with the 335d. When I go to the hidden menu all I see is the water temp.
Hello, your conversion instruction is great. I installed the Perfect Toolbox, everything works, I did the conversion, the test-drive works, the indicator shows the set value. The problem is, it doesn't show the oil temperature. Is it possible that my engine does not have an oil temperature sensor?
e91
2006
2.0 Diesel M47N2
same problem. oil temperature sensor appears to overwrite the data from the coolant temperature sensor. through diagnostics these two data are identical. After setting as in the video, the oil temperature is kept to a minimum
Did you find any solution yet?
Same here for the m47n2, anyone found a solution?
I have exactly same problem
Where can i get something like this done among overide the annoying start stop device?
Hi, good video thank you. I have tried to do on my e90 330i and have issue with values on gauge. When I set temperature to 100 I see 7 on gauge. When I set temperature to 120 I see 10 on gauge. Strange.
Have you tried to set the range from 70°C to 170°C with 120 in the middle ? It seems to be the right value for the 330i as you can see on a E92 330i cluster.
It doesnt work on e92 325d 2011 n57, any sugesstion ? Thanks
No, it only works on the M47/M57 Engines for the E90
Correct. I just testet on my 2011 325d whit N57. It dosen't work. :(
@@eyestormE30M3 it doesnt work on my e90 325d n57
It doesn’t work with e90 320d m47tu2… done exactly like in this video. When tested with program it show’s correctly but when driving it stays at 0.
Yeah, same 😢
zeiger nicht vorhanden for 2005 n52 330i when going to test.
Does anyone have any idea how to measure temperature on E87 (2005)?
Great video, thank you! Does it work on 4 cyl engines for example m47, n47 and ect? Thank you.
Пирин Тихинов sorry I do not know. You can try and report back. Just save your file
@@mecheng1977 I got a 335i cluster which has the tempeture gauge. Do you know if it's possible swap them and put it to work without codes and syncrhonized with my VIN? Ive looking for this and no answers so far...
@@lucasld95 You will still have to code it. You can't put in a new dash unit without coding it.
i tried on an n47 but it doesn’t work
what if i want 90 to be dispayed instead of 100 at the middle ,do i need to change the motor steps too?
Yes play with the settings
It won’t work on my e90, 2006. M47N2 ☹️☹️😡😡 on oil temp stays on minimum, i saved backup and return
Sounds like a Euro engine to me. North american Engines are N5X
@@mecheng1977 yes its euro engine. Is there any way to set it up? 😫
It doesn’t work on m47… same problem
Great job! It seems that my INPA doesn't detect the car at all. It shows "off" even when it is on. Any suggestion?
OmegAtlAnt it could be anything, make sure u are on com 1, check the installation guide
@@mecheng1977 thanks man, I solved, it was Com1 (I had Com 3) and then not having EDIBAS 3.7.0 installed. The CD software driver the cable came with was s**t , found much better drivers online.
OmegAtlAnt great
How to convert ambient temp digital display to eng oil temp on BMW 90
It looks like the perfekt tool box link is dead. Are you able to send me the program?
Lance Strongarm # metoo
@@Danny-yh3xb google didn't produce any new links?
@@mecheng1977 No and link is dead. Can you provide link once more?
Suggest a central place to upload it
@@Lance_Strongarm thanks guys, fixed the link.
Why do i also need the BMW EDIABAS software? How do i know what motor steps to insert, or can i just leave them as is?
You can experiment with the steps
@@mecheng1977 Thanks, i have got it to work, was quite easy actually.
Works also for 320d (diesel) or just for petrol engine?
Yo estoy intentando hacerlo en un N47 y no lo consigo.
Hi bro, can you send me a pic on display after you set the oil temp on dash board?
Thanks !
to see how it looks!
Can this be done with protool from beemergeaks?
I doubt it
Not working for m47 320d 163ps
@
Eng Guy DIY Would you please fix the download link? Thank you!
It’s not working? If not send me a new link
@@mecheng1977 Is it working for you? It doesn't work for me.
I don't have new link, that's why I asked you to fix the link :-D
Can't find the app anywhere now, the original website for the download link no longer works. If somebody has the zip or the app, we'd be thankful for a link to google drive or whatever other file sharing service :-)
@@dima6312 WIth the help of guys on our local BMW forum I have found, that the link still sort of works, it just not clickable anymore.
My Google Chrome browser even does close the page automatically, when I click on it.
But when I right click and select "Save link as", it downloads the file just fine :-O
@@tomas_klouda LEGEND! Thank you, it worked :-D
is it possible to code other options on bc like moment consumption, trip1, trip2.... etc?
zwerxyz you mean through perfect toolbox?
@@mecheng1977 trough any cooding tool?
zwerxyz yes through the Bmw software, it is not as user friendly but there are other TH-cam vids
the download link doesnt work anymore
Remember this works only with High Speedo and not Low Speedo
what do you mean about that?
@@HeavyModded Its two different speedometers. For example like on E6x its normal to have high speedo ( the best one ).
On E9x it came with high speedo and low speedo. Low speedo is ugly with small display.
It works If i test it in the perfect Toolbox, but it doesnnt change when i drive. What is the problem? M57 2006
Are you sure the engine is warmed up? Sounds like it didn’t write to the kombi
@@mecheng1977 yes i am sure the engine is warmed up, i think it doesnt work on my car..
@@robbertslingerland2633 I have the same issue. Same engine an year. When I applied the changes, the needle just moved 1mm to the right and doesn't react anymore. The needle moves in the test, but it's dead on the dash. Can someone help?
@@RhaSEe bro same year same engine same problem did u fix it?
@@dena. no mate… I think it’s because of the cluster itself. It has to be the high version - after 2007
Should I change the motor steps the same?
can you Upload this programm? download links are down..
Yes use the same steps
work on 330d N57 ?
Not sure
Hey, does this work on e92 2011 335D. Thanks!
Not sure
I think it shows the water temp not the oil temp. I did my 2006 335D and it never gets much above 75. Diesels do run cooler but it seems like water temp. Also on mine I only see a water temp feature in the hidden menu
Can do that on e46?
I don't know
Nope, E46 doesn't have oil temp sensor
Not working on m57n2 :(
working perfectly fine
@@terazium5840also not working for me.. can u help
@@dena. 3 series or 5 series? some m57 work some dont, how many hp/kw your engine has? maybe your oil sensor not working properly idk.
@@terazium5840 3 series 231hp or 170 kw
Hi, the link is not working anymore. Do you know where to download now?
Does it work on 330d 2006 ( M57 ) ?
Not sure
did it work?