How to Replace Wheel Hub Assembly 2002-2005 Ford Explorer
ฝัง
- เผยแพร่เมื่อ 8 พ.ค. 2022
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00066
This video shows you how to install a wheel hub and bearing on your 2002-2005 Ford Explorer. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2002 Ford Explorer
2003 Ford Explorer
2004 Ford Explorer
2005 Ford Explorer
Tools you will need:
• Pocket Screwdriver
• Pry Bar 1aau.to/oa/1AXAA00020
• 14mm Socket 1aau.to/oa/1AXAA00015
• 15mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 30mm Socket
• Trim Tool Set 1aau.to/oa/1AXXX00004
• Torque Wrench 1aau.to/oa/1AXAA00044
• Copper Anti-Seize
• Liquid Thread Locker
• Center Punch 1aau.to/oa/1AXAA00055
• Hammer 1aau.to/oa/1AXAA00091
• Pick 1aau.to/oa/1AXAA00037
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Mannnn I just love this dude. He explains everything in complete detail and in a perfectly clear voice! I replace my hub and wheel bearings about a month ago all from his videos. But prior to doing the repairs I brought all the tools I needed to do the job. I even went to Harbor Freight and brought me 2 ton heavy duty floor jack. Next I'll be replacing my CV Boots axles up front. I had the tool just waiting to buy the parts from Amazon. I tip my hat to you man your very knowledgeable about what you do. Thanks a whole lot!
God continue to keep you and bless you!
This is a great video as it shows you how the wheel bewring replacement procedure is. However, you dont need to unbolt any suspension parts guys. Just make sure to have some extensions a short 15mm socket and a pry bar to push the acle back and clear some space.
I wish all TH-cam repair videos were like this
Just want to say Thank You! I appreciate someone making my life easier.
+Warnerwh Tada Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Great video, have to start on mine, (all 4) next week and this is exactly what I needed.👍
Thank you buddy!
Saved me hundreds!
I’m assuming you undid upper control arm for easier access to hub bolts, is it necessary if using a wrench and not a gun and socket, l have no time constraints
I wanted to "like" the video but it would not let me. Very good video. Thanks.
+Ted Williams Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Awesome video. Thanks
Hi dude, some parts seems to be very rusty. What can I do to avoid it or at least minimize it? I would love to watch a video about this. Thanks a lot, love your videos al lot
how do you relace Wheel Hub and Bearing Assembly - Rear for2003 Ford Explorer limited 4 by 4
Why was so much of the suspension taken apart to do this it's not necessary
Thank you 🙏🏽
We have a Ford Explorer 2003, and one mechanic of ours replaced the wheel hub assembly because two of the posts for the lug nuts had fallen off (rusted, I guess), and another mechanic looked at it afterwards and said that wheel hub assembly replacement has serious issue - inside bore diameter is too large - they think that it is missing a sleeve, causing the ball joint to flop around. Do you know how this might have happened?
Should I use a aftermarket hub bearing ?
How did he do 184ft pounds I have 2 have a cheater bar and stand on it
This company actually makes pretty good videos, but not a lot of thumbs up and then I see videos that are horrible with 1000 thumbs up
Disassembling the brakes was unnecessary