That image is hilarious. I'm a 30 year licensed structural engineer in aviation. Problem? Rivet is to long. Solution? Use a rivet with the correct grip length!!! Now I will watch the video. EDIT, Clever rivet mod. 👍👍
I may watch that again! Feeling the jazz vibe! No but seriously, rivets are delicious to work with! Thanks for the birds eye view of the mandrel flaring the tube end!
Hey, how about a similar video with another handy mounting system called Rivet nuts? A fastener that leaves a threaded hole to attach things with standard size machine screws.
Question: Since the Rivet Base begins to deform (shorten) immediately when you begin to compress the "nail", is there some way to 'begin' compressing the Rivet at an angle (like the one shown in the vid) and then "straighten out" the installation tool once the below-surface nub has shortened enough to be swung to the Vertical? Or is the Rivet component deformed at an angle that won't allow correct 'attachment' of the two surfaces?
Wow, thank you sooo much. I've never seen a video this short with this much information, without lot of ridiculous talking. Well, like they say: some people just got it.
Many occasions there is not the correct length for the application. More than often the rivet won't pop correctly if length is not correct. Help this helps
You could do this with nails that are too long - cut them to needed length then resharpen the point. OR you could just use the correct size in the first place.
Can you write the manufacturing step of how pop rivets are produced? can you write like this, i cut it on the lathe and then i made a hole as an example
A rivet gun, or a riveter. a cheap one is 20$ and an expensive one is 150$. They come with 5 standard size tips so u can rivet 5 different size rivets. You can even get cordless and pnuematic rivet guns
That image is hilarious. I'm a 30 year licensed structural engineer in aviation. Problem?
Rivet is to long.
Solution? Use a rivet with the correct grip length!!!
Now I will watch the video.
EDIT,
Clever rivet mod. 👍👍
Clever. I admire people's ingenuity. But this seems like a lot of work, when you could just use the correct rivet.
Nice solution for when you only need one or two shorter rivets. You are rite, buying a packet of the correct size is best.
Obviously having the correct size is best, but if a job only requires 1 or 2 rivets and its a 2 hour round trip to the supplies, its a no-brainer
I may watch that again! Feeling the jazz vibe! No but seriously, rivets are delicious to work with! Thanks for the birds eye view of the mandrel flaring the tube end!
Kısa perçin var zaten neden bu kadar uğraşıyorsunuz
Hey, how about a similar video with another handy mounting system called Rivet nuts?
A fastener that leaves a threaded hole to attach things with standard size machine screws.
Thank you! I wish more videos were as straight to the point as yours.
Question: Since the Rivet Base begins to deform (shorten) immediately when you begin to compress the "nail", is there some way to 'begin' compressing the Rivet at an angle (like the one shown in the vid) and then "straighten out" the installation tool once the below-surface nub has shortened enough to be swung to the Vertical?
Or is the Rivet component deformed at an angle that won't allow correct 'attachment' of the two surfaces?
lidee est bonnr mais la ca devient la misere pour bricole a ce niveau la😊
So it's a permanent rivet?. Where you can't unscrew it & take it off?
Yea you maybe looking for a rivet nut
Это и всё??? Урок для дошкольников. Facepalm
just get the right size rivet!!! time is money...
Just buy the right size rivet. If you only need a few this trick is helpful.
Not everybody can offer all sizes where they live
Wow, thank you sooo much. I've never seen a video this short with this much information, without lot of ridiculous talking. Well, like they say: some people just got it.
What do you cutting ? ( didn't see from out, only longer working ).
Why not just get the right size?
Really !!
Many occasions there is not the correct length for the application. More than often the rivet won't pop correctly if length is not correct. Help this helps
Why doesnt he just use the correct rivet. He has to much time on his hands im not impressed
Don't be silly, wear protection gloves.
Ok OSHA officer
Wooow when is rivet long shorten it. What agreat idea. Never seen before...
a veces la solución más obvia no es tan obvia... buen video!
Better with no music
Disassembly & reassembly of a pop rivet? So what?
cheap labor use the wright rivet with the wright grip range.
Wow
Now a solution for a closed end Rivet in stainless steel 😁
Veey helpful i was curious how it works now i know
果然是天才
Thanks for the inside view very helpful.
Or just buy the right length rivet
Very interesting. Doesn't the rear / internal end of the rivet also sit flush? Like the exterior end?
No. It’s made to be “bucked” into a bulb.
What do you call it, the tool to cut that rivet nail?
Tang pemotong kawat saja pak, lihat2 saja di toko bangunan pasti ada..
Rivet gun
Rivet gun
Pincers
I’m. Going to build a roof deck for my gym with this thanks :)
I built my house with rivets.
Neat trick!
I am a rivet factory,
thnku sir bahut acha lga idea apka
great customization
Verry good... ❤
what is different between long and short rivet ?
range/thickness of combined sheets to be fixed - eg - 3.2x8 for fixing between 2 and 4mm.
Cool trick man
TOP !👍👍👍
Thanks!
what
You could do this with nails that are too long - cut them to needed length then resharpen the point. OR you could just use the correct size in the first place.
What is that cutting tool you had called?
It is a nail nipper.
@@pasqualeparente9776 why reduce its lenght?
@@Steve-lh6ww he reduced the length so it would fit in the place he needed to join the pieces.
@@pasqualeparente9776 I see, I skipped video and no audio I didn't see what he did early.
What is the name of end cutter plier's brand and model number.
Can you write the manufacturing step of how pop rivets are produced? can you write like this, i cut it on the lathe and then i made a hole as an example
Love it the good save my day, thanks for sharing.
1 down, 100 to go...
How long does the rivet pin need to be - minimum length ?
This is awesome. Thank you for sharing
good trick, thank you
Thanks a lot man
Well done!
What is the blue color tool you are using at th-cam.com/video/hJfbZ5520nM/w-d-xo.html
is this a common household item / tool ?
A rivet gun, or a riveter. a cheap one is 20$ and an expensive one is 150$. They come with 5 standard size tips so u can rivet 5 different size rivets. You can even get cordless and pnuematic rivet guns
Good! Straight to the point, clear and precise.
It's common sense not a trick.
👍👍👍👍💪💪💪💪❤
pas nouveau simplement un peut de jugeote mais c'est pas donné à tous le monde
Riveting stuff. Thank you