GX Works 2 : ADD,SUB,MUL,DIV instruction mitsubishi PLC FX series connected with HMI simulator
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- Arithmatic instruction mitsubishi PLC.
ADD (+) SUB (-) MUL (*) DIV (/)
simulation with HMI GT designer 3, training become easy to understand
#plc #ladderdiagram #mitsubishi #automation #gxworks2 #plcprogramming
![[TH] VALORANT Champions Seoul - Grand Final - EDG vs TH](http://i.ytimg.com/vi/WvObMc9VelI/mqdefault.jpg)
Learned how to program the HMI and the choice of music was WONDERFULL !!
Thanks For Watching this Video...
Why when you push on X2 D0= 10 Value can explain please.
Because ADD instruction.
program >>> [ADD D0 K10 D0] means Data D0 add by 10 and store to D0 every 1 Trigger..
@@automationliker it should D0 =0 Value + K10 =10 ?
@@Kannvanlan yes like that
@@automationliker Thank you next video can you make Analog input and analog out put videos for Q Series cpu Thank for shared knowledge.
The ADD instruction is not working.
The one on the third rung.
Check again your Switch address must same with Switch HMI address..
Also Check ADD Instruction.
If you Follow this video, i think its Works
@@alchris2978 and you must make sure that Mitsubishi PLC Type is FXCPU, ADD instruction only works on FXCPU
@@automationlikerThank you. I was using a Q series
¿Ws necesario tener el plc conectado? para simularlo ya que le doy en SIMILAR,pero me manda un error 0180840b correspondiente con un tema de conexión con plc.
No sé, si es necesario tener conectado veo plc para poder silumarlo.
This simulation for GT Designer3 and GX Works2 No need PLC Connected
If error appear, maybe you want to write program but Communication error (Maybe from cable, COM setting, etc)
@@automationliker pero el tema del cable, la configuración COM - son para el tema del conexión con el plc
¿Existe algún error, que se presente en el momento que uno intenta iniciar al configuración?