Thanks for the help getting started. Can you create a short video to show the easiest or best way to get into an existing program, find a device, then edit that rung to add a device? Thanks again!
Tnx for a clear explanation in proper English. I do have a problem with registering the System label information . I compiled and saved, but I keep getting the error message.
Thanks for this video. It was the best explanation of this software I've seen in many videos I searched. It help me so much! Only one question, in mine gxworks2, when I start typing, it don't show all the label options I created with this start name. Do you know why? My version is 1.77F. It works only in st loggic
Hello, Excellent explanation. Very much simple and understandable to beginners. In my FX3U compact PLC the TON instruction doesn't work. The PLC goes into Error when run. This is applicable to all IEC function blocks. Program compiles without error or warning, offline simulation runs well. What is the possible reason?
Hello teacher, do you know how I can add another ladder program sheet in a program of an original FX3G or FX3U PLC in a new project? It doesn't let me when it's a new project, but yesterday I loaded a program from an original FX3U PLC and it did have several sheets. I can add leaves to that program but not to mine. Greetings
I have a few plc’s. Mitsubishi fx1s10. Fx3s10. Omron CP1E . Crouzet millennium 3. I also have an old GOT 1000 HMI. I have CXDevelopper, omron cx1 and crouzet free software. I want to end up with just one brand. What do you suggest I keep?
Keep them all! But if we were to recommend one, Omron is a great starting tool! We also have an online course called the PLC Programming for Industry course which is perfect for beginners and uses Omron as the learning platform due to its ease of use.
HI; would you please help me with programming a pid instruction to controle speed of FAN ( analog out is from 0 TO 10V) plc is AMX FX3U 26MR AND SOFTWARE IS GX WORKS2. I HAVE TRIED BUT THE PID OUTPUT NOT WORKING
Thank you Chris - much better explanation than our trainer at local technical school!
Glad to hear it! If you ever need face-to-face tuition, let us know!
Thanks Chris. Very well explained.
Glad it was helpful!
This is very great Chris. You are a very good teacher.
I appreciate that!
Great introduction to gx works 2 video
Glad you think so!
You got new like and subscriber, great video
Great explanation, good job!! Congratulations and thanks a lot!
Glad you liked it!
Many thanks for the information! 😎
My pleasure!
Thank you so much, very nice video
Thank you too
Like your presentation. Novice at the moment looking at some automation for my vehicle. Will be looking at your work, thanks mate
Awesome, thank you!
Great video, thanks Chris
Glad you enjoyed it
Great video!
Glad you enjoyed it
Hi! Great tutorial
Thank you! Cheers!
great video
Great stuff!
Thanks!
Thanks for the help getting started. Can you create a short video to show the easiest or best way to get into an existing program, find a device, then edit that rung to add a device?
Thanks again!
Great suggestion! We actually cover this more on our hands-on training courses :)
Thanks Chris!
No problem!
Good content
Thanks!
Very clear explanation, great job!, delivered in a very easy to understand, professional manor! thank you! i look forward to more of your tutorials!
Glad it was helpful!
Great explanation, excellent!!
Glad you enjoyed it!
Tnx for a clear explanation in proper English. I do have a problem with registering the System label information . I compiled and saved, but I keep getting the error message.
Have a look at the error message, this will usually give you some indication.
Very useful video. Thanks
Glad it was helpful!
Hi great tutorial.Can you make a video on virtual comission of fanuc robotguide software with Mitsubishi plc.
Nice video thank you
Thank you too
Thank you
No problem
Thanks for this video. It was the best explanation of this software I've seen in many videos I searched. It help me so much! Only one question, in mine gxworks2, when I start typing, it don't show all the label options I created with this start name. Do you know why? My version is 1.77F. It works only in st loggic
You're very welcome! I would personally need to see what you are seeing to check if there is anything missing in terms of the setting up.
thank you sir
No problem
Thanks Chris
No problem!
love your videos can you do more videos about gxworks2 and use more languages
especialy ethrnet connection communication
We'll look to create more videos on GxWorks 2!
HELLO FROM UGANDA
HI!
I worked along with this using my LE3U. Does anyone have an idea why the hardware timer won't start though it works in the simulation mode?
Hello, Excellent explanation. Very much simple and understandable to beginners. In my FX3U compact PLC the TON instruction doesn't work. The PLC goes into Error when run. This is applicable to all IEC function blocks. Program compiles without error or warning, offline simulation runs well. What is the possible reason?
You are welcome! We would have to check your code unfortunately to see what may have gone wrong.
Great
Thanks
Hello teacher, do you know how I can add another ladder program sheet in a program of an original FX3G or FX3U PLC in a new project? It doesn't let me when it's a new project, but yesterday I loaded a program from an original FX3U PLC and it did have several sheets. I can add leaves to that program but not to mine. Greetings
Are you referring to POU's for program sheets?
I have a few plc’s. Mitsubishi fx1s10. Fx3s10. Omron CP1E . Crouzet millennium 3. I also have an old GOT 1000 HMI. I have CXDevelopper, omron cx1 and crouzet free software. I want to end up with just one brand. What do you suggest I keep?
Keep them all! But if we were to recommend one, Omron is a great starting tool! We also have an online course called the PLC Programming for Industry course which is perfect for beginners and uses Omron as the learning platform due to its ease of use.
Apart from yours. Can you recomend any web or youtube channel with project examples?
Specially one with stepper motors
Hi Charles, unfortunately, we can't make any recommendations unless we have personally used their courses or videos etc., which we haven't
hello good man
Hello
HI; would you please help me with programming a pid instruction to controle speed of FAN ( analog out is from 0 TO 10V) plc is AMX FX3U 26MR AND SOFTWARE IS GX WORKS2.
I HAVE TRIED BUT THE PID OUTPUT NOT WORKING
Will have a look at PID
How did you get into this stuff at 15? I can only guess your pops put you on at an early age.
That's correct, my dad's been working since he was 15 in 1968 and working with PLCs since 1982, he wanted a retirement plan, and I am it 😉
where can I get the GX work2 software ?
You can purchase this from Mitsubishi
good
Thanks
Why are my global labels not working i wonder i followed along. it wont turn pink
I'm not sure unfortunately, but make sure they are named correctly and are set up as the correct data type
Hello sir How to install both simatic manager and tia portal in same windows
Best to use a Windows 7 machine :)
How i will get the gx developer application
You can try and get it from Mitsubishi!
PARA MIM NÃO FUNCIONOU ESTÁ COM ERROS . OBRIGADO . FROM BRAZIL.
Thanks?
Is it possible to simulate without plc.
Yes, it certainly is!
Hello
Hi!
Thank you