Good review but I guess your top camera shot is mirrored because the record button is on the left side and TILTA is written backwords. I just bought the Neewer thanks to you.
Heyy did you know you can do what you did with the Neewer (DJI screen facing you) with the Ulanzi? The Ulanzi logo has action camera quick release compatibility. It's actually on all 4 sides, so it had 4 mounting points as well as GoPro mount and 1/4-20 thread
Ahhh I see what you are talking about! Didn’t notice those mounting points but that’s with the ulanzi action mount which adds bulk to the set up if all I need is a 1/4”-20 thread! But if you do use that system then it’s super useful! Thanks for pointing that out! 🙏🏽
I think it’s a really good one! The fact that you can still use the original case that came with the Pocket 3 I think it’s a great thing! Also the fact that you have access to the card slot without the need to remove the cage is also very nice! I actually think I might buy it and give it a try🤔 Thanks for suggesting that, this is the first time I’m hearing about this cage but overall it looks pretty functional
@@PRTPHO I am trying to go for a minimalistic setup with mounting points, wide-angle lens always attached, and a much smaller footprint when setting it down on a desk. No protective case out there can accommodate pocket3 without removing the wide-angle lens except for the original case, so I'm gonna keep that. Then I came across Falcam, and I just ordered it to try. Footprint wise I'm gonna try the Ulanzi PK08 and PK11. It's a super mini tripod. It's super tiny and cute, worth checking it out.
It makes it easier for me while making the video to show the things, but I guess I can mirror it back in DaVinci Resolve so y’all can see it correctly! Thanks for pointing that out! I appreciate it! 🙏🏽
@@PRTPHO actually inside in a church. I am recording in 30 fps and am turning off the screen during record. After 10-15 minutes the unit cancels the record due to heat. I am glad to hear that there is hope... it is just a matter of finding the time to do a lot more testing
Interesting! I just started a test at 4k 30 with the mic connected as well! I’ll keep it going until it overheats and let you know what I get! This will be with no cage installed
Nice thorough video! A couple things. You didn’t mention that the Tilta cage has Nato mounts. I was leaning towards that one until you pointed out that there’s no front or back mounts. The other thing is although I love your energy and content you should not use the word “technically” as much. Minor point for an overall enjoyable video. Oh yeah, it was great you problem solved with the Dremel. I agree that the Neewer is the best pick after that mod.👍
Wow thank you so much for the constructive criticism! I appreciate it very much! Saying technically is definitely a crutch 🩼 of mine so I’ll do better, ether to not say it or edit it out haha 🤣 I didn’t I didn’t mention it because I couldn’t think of the word and I called them something else when I recorded it, but I guess I could have done an annotation on the screen. Thank you so much for watching it 🙏🏽 and yeah the Neewer is definitely my he winner, it’s still attached to my poket 3 haha
I guess I don't understand why you would switch from the small handle mount to the battery in the first place. I've literally never used the small handle mount to begin with, it's kinda worthless.
That’s fair! It depends on the situation, if I’m using it for travel then there are instances where I like to have the smaller grip (if I don’t need the extra battery) so I can connect the tripod, but if I’m just going out on like a little outing and I know all of it will be hand held then I leave the small handle at home to keep the P3 more manageable I do wish they would have gone away with the small handle and added a 1/4” mounting point to the P3
@PRTPHO yeah that's what I mean, I don't ever use it without a handle. My hands are too big and it's way too small for no handle at all. I'm also always filming through most of the day when in use, so there's never really a time I wouldn't be utilizing the battery handle to extend the life of the p3 for that day's use.
For sure! Long term use the battery is 100% necessary! But hey I just figured I’d show all the scenarios I had in mind just in case! Have you ever bought a second battery grip?
Here is a link to aliexpress www.aliexpress.us/item/3256807779958652.html?src=google&pdp_npi=4%40dis%21USD%2177.00%2135.42%21%21%21%21%21%40%2112000043062611353%21ppc%21%21%21&src=google&albch=shopping&acnt=708-803-3821&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=m&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en3256807779958652&ds_e_product_merchant_id=5365812309&ds_e_product_country=US&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=19623912707&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gbraid=0AAAAAD6I-hE5Zs2SyqpEprbpuDLsCjXdi&gclid=Cj0KCQiAo5u6BhDJARIsAAVoDWuvgUygc1V6wHDY5cuFaK0gmZJcRDuycmUFr7i_oEIC40vc3-uocQsaAsohEALw_wcB&gatewayAdapt=glo2usa
It's odd to not have a mount plate on the front, who walks around with POV shoot with the screen facing what your shooting. No discretion whatsoever. People will see your themselves on the screen adjust.
Thank you, I have watched so many video and yet I hadn't seen the neewer model and it will suit my needs perfectly.
That’s awesome to hear! Glad I was able to help! Thanks for watching Dean! 🙏🏽🙏🏽🙏🏽
Great video! I’ll be picking one of these up for my Osmo. I subscribed and looking forward seeing more videos🙂
Thank you so much! I’m glad I was able to help out, let me know if there is anything in particular you want to see or know 😁
Your content is godsent!
😵😵 I would have never expected anyone to say that! Thank you so much! 🙏🏽🙏🏽🙏🏽 glad I could help a little!
Great video !
Thank you so much! I appreciate it! 🙌🏽
Good review but I guess your top camera shot is mirrored because the record button is on the left side and TILTA is written backwords. I just bought the Neewer thanks to you.
Thank you! And yes the top camera is mirrored! I’ll try not to make that mistake again! Yay! I’m glad I could help!
@@PRTPHO I hope the Neewer will also work with the new Dji Pocket 4 end of this year.
Haven’t heard much about it but I can’t wait to see it!
Heyy did you know you can do what you did with the Neewer (DJI screen facing you) with the Ulanzi? The Ulanzi logo has action camera quick release compatibility. It's actually on all 4 sides, so it had 4 mounting points as well as GoPro mount and 1/4-20 thread
Ahhh I see what you are talking about! Didn’t notice those mounting points but that’s with the ulanzi action mount which adds bulk to the set up if all I need is a 1/4”-20 thread! But if you do use that system then it’s super useful! Thanks for pointing that out! 🙏🏽
technically good video.👍
Thank you so much! 😊
Well, impossible to buy Neewer from amazon.
Sad! I definitely bought mine from there, they must have sold out hard!
@@PRTPHO Yup. And not even at the USA Amazon.
Any thoughts on the Falcam F22 pocket 3 cage?
I think it’s a really good one! The fact that you can still use the original case that came with the Pocket 3 I think it’s a great thing! Also the fact that you have access to the card slot without the need to remove the cage is also very nice! I actually think I might buy it and give it a try🤔
Thanks for suggesting that, this is the first time I’m hearing about this cage but overall it looks pretty functional
@@PRTPHO I am trying to go for a minimalistic setup with mounting points, wide-angle lens always attached, and a much smaller footprint when setting it down on a desk. No protective case out there can accommodate pocket3 without removing the wide-angle lens except for the original case, so I'm gonna keep that. Then I came across Falcam, and I just ordered it to try. Footprint wise I'm gonna try the Ulanzi PK08 and PK11. It's a super mini tripod. It's super tiny and cute, worth checking it out.
That’s true! Which is why I like the Falcam F22 since it allows you to use the original case!
I’m so torn haha
Why is the overhead footage mirrored?
It makes it easier for me while making the video to show the things, but I guess I can mirror it back in DaVinci Resolve so y’all can see it correctly! Thanks for pointing that out! I appreciate it! 🙏🏽
Great video man…thanks for the info
Thank you and of course! I know it was long af but I’d figure the more information the better 😂 Thank you for watching 🙌🏽
Does the tilta cage help with heat ? My other one is a solid plastic and I only get 10 min or so
You get overheating with the OP3?
I didn’t think it overheated since it’s never happened and I’ve never heard of it
It is so frustrating wanting to use the pocket 3 to record performances and to have it overheat. (Using the dji cage and without it)
Are you recording outside in the heat and in 120p?
@@PRTPHO actually inside in a church. I am recording in 30 fps and am turning off the screen during record. After 10-15 minutes the unit cancels the record due to heat. I am glad to hear that there is hope... it is just a matter of finding the time to do a lot more testing
Interesting! I just started a test at 4k 30 with the mic connected as well! I’ll keep it going until it overheats and let you know what I get! This will be with no cage installed
Nice thorough video! A couple things. You didn’t mention that the Tilta cage has Nato mounts. I was leaning towards that one until you pointed out that there’s no front or back mounts. The other thing is although I love your energy and content you should not use the word “technically” as much. Minor point for an overall enjoyable video. Oh yeah, it was great you problem solved with the Dremel. I agree that the Neewer is the best pick after that mod.👍
Wow thank you so much for the constructive criticism! I appreciate it very much! Saying technically is definitely a crutch 🩼 of mine so I’ll do better, ether to not say it or edit it out haha 🤣
I didn’t I didn’t mention it because I couldn’t think of the word and I called them something else when I recorded it, but I guess I could have done an annotation on the screen. Thank you so much for watching it 🙏🏽 and yeah the Neewer is definitely my he winner, it’s still attached to my poket 3 haha
I guess I don't understand why you would switch from the small handle mount to the battery in the first place. I've literally never used the small handle mount to begin with, it's kinda worthless.
That’s fair! It depends on the situation, if I’m using it for travel then there are instances where I like to have the smaller grip (if I don’t need the extra battery) so I can connect the tripod, but if I’m just going out on like a little outing and I know all of it will be hand held then I leave the small handle at home to keep the P3 more manageable
I do wish they would have gone away with the small handle and added a 1/4” mounting point to the P3
@PRTPHO yeah that's what I mean, I don't ever use it without a handle. My hands are too big and it's way too small for no handle at all. I'm also always filming through most of the day when in use, so there's never really a time I wouldn't be utilizing the battery handle to extend the life of the p3 for that day's use.
For sure! Long term use the battery is 100% necessary! But hey I just figured I’d show all the scenarios I had in mind just in case! Have you ever bought a second battery grip?
Hmm, the neewer cage is not available right now...
Here is a link to aliexpress
www.aliexpress.us/item/3256807779958652.html?src=google&pdp_npi=4%40dis%21USD%2177.00%2135.42%21%21%21%21%21%40%2112000043062611353%21ppc%21%21%21&src=google&albch=shopping&acnt=708-803-3821&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=m&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en3256807779958652&ds_e_product_merchant_id=5365812309&ds_e_product_country=US&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=19623912707&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gbraid=0AAAAAD6I-hE5Zs2SyqpEprbpuDLsCjXdi&gclid=Cj0KCQiAo5u6BhDJARIsAAVoDWuvgUygc1V6wHDY5cuFaK0gmZJcRDuycmUFr7i_oEIC40vc3-uocQsaAsohEALw_wcB&gatewayAdapt=glo2usa
@@PRTPHO not available there either. Maybe they are fixing the compatibility with the battery
Maybe! Or maybe it sold out but dang I wasn’t expecting That!
It's odd to not have a mount plate on the front, who walks around with POV shoot with the screen facing what your shooting. No discretion whatsoever. People will see your themselves on the screen adjust.
I mean I definitely wouldn’t like that so definitely gotta have the screen pointing back