วีดีโอ

I’m sorry! I’ve been juggling with different cameras so definitely don’t have everything down to a T! I’ll keep trying to do better!

Thanks you so much!!! And yes swapping out batteries will definitely help and at 4k 24p you should be able to get 1 hour of battery life if you are in a 75 degrees or cooler place You can always shoot at a lower bit rate to increase the amount of overheating if your goal is to at least get to the 1 hour mark

I mean with the Zv-e1 you are getting the Fx3’s sensor which is better than Fx30 But if you are shooting for long durations then maybe get the fx30 But if you can I would get the fx3

It will stick to an excavator for sure!

lol I’m sorry! Just trying to help out hahaha 😂 And thank you!

th-cam.com/video/BcW5DvHDvXo/w-d-xo.htmlsi=M7SdPa20dgMgR3Py

Here is the video that test out both the SmallRig and the Tilta fans but for 24p which is the test I did it was no overheating, it recorded for 3 hours and I just stoped the test cause it was too long haha

Thank you!

what I meant was how do I change it

I got this online since I don’t have them with me: open the Nvidia Control Panel, navigate to "Manage 3D Settings," then under the "Program Settings" tab, select the application you want to adjust and simply turn off any VR-specific options like "Virtual Reality - Variable Rate Supersampling" by setting it to "Off.

@@PRTPHO Thank you for responding but it didn't really work, but it's fine because I can play it well anyways, tysmm :D

@ I’m sorry it didn’t. 😭 which one do you have?

Sad! I definitely bought mine from there, they must have sold out hard!

@@PRTPHO Yup. And not even at the USA Amazon.

Maybe Alibaba express

Why sad?

Well I’ll have to re-do it, I wasn’t able to develop film as fast as I wanted and in 3month both solutions were substantially dark, the unused one was a bit lighter but I used it to develop friends film and it did not work properly. So definitely gonna have to redo after I have at least 16 rolls ready to be developed

@@PRTPHO understood

Right now I have a batch that I made on January 5 than I’m mixing back to its original and after 3 rolls is still going strong in February 5 I’m gonna develop 3 more roll and the how it does after one month

I totally see your point! There are always gonna be drawbacks and advantages depending on the set up and it’s definitely a use case which one works for you! But I like your thought process! Which camera are you peering it with?

@ a7c ii. It’s a fantastic setup!

I just went into the mobile app to try to do cinematic mode with the PromptSmart app but I can make it happen, it just uses the main cameras

Thank you 🙏🏽 yeah that Sony a7cii I such a good way to dip your toes in full frame and in Sony for that matter! Hopefully you can get some prime soon!

Thanks Paul! I live in FL but not in Orlando I’m like 3 and a half hours away from you haha

@@PRTPHO Dang, maybe one day lol

For sure! I’ll hit you up if I’m ever going up there for work or for fun! It think it would be cool!

Small world,🌎 oviedo too!

I know! So close yet so far haha

That’s awesome to hear! Glad I was able to help! Thanks for watching Dean! 🙏🏽🙏🏽🙏🏽

Glad I could be of some help! Which combo did you decide on? Any of the two in the video or did you get something different?

@@PRTPHO ZV E1 and 20-70 for Senegal

@ I think you are gonna have a blast! I used it in Puerto Rico and it was great. I’m a wide aperture snob so I was missing the f2.8 and f1.4 but the set up was so light weight! It was actually enjoyable to use

Definitely gonna take a look!👀 thanks for the suggestion!!

are these lens for full frame only i have the a6700

Those lenses are for full frame cameras

Yes they are! If your.a6700 has an 1.5 crop mode then you can use them

I think it’s a really good one! The fact that you can still use the original case that came with the Pocket 3 I think it’s a great thing! Also the fact that you have access to the card slot without the need to remove the cage is also very nice! I actually think I might buy it and give it a try🤔 Thanks for suggesting that, this is the first time I’m hearing about this cage but overall it looks pretty functional

@@PRTPHO I am trying to go for a minimalistic setup with mounting points, wide-angle lens always attached, and a much smaller footprint when setting it down on a desk. No protective case out there can accommodate pocket3 without removing the wide-angle lens except for the original case, so I'm gonna keep that. Then I came across Falcam, and I just ordered it to try. Footprint wise I'm gonna try the Ulanzi PK08 and PK11. It's a super mini tripod. It's super tiny and cute, worth checking it out.

That’s true! Which is why I like the Falcam F22 since it allows you to use the original case! I’m so torn haha

Thank you! And yes the top camera is mirrored! I’ll try not to make that mistake again! Yay! I’m glad I could help!

@@PRTPHO I hope the Neewer will also work with the new Dji Pocket 4 end of this year.

Haven’t heard much about it but I can’t wait to see it!

It was my pleasure! Thanks for watching it 😁 That’s one thing that I think will help since the battery door will be open and the charge is just passing through the dummy battery and not coming from inside it. I just didn’t have one since I’m not used to using it!

Thank you 🙏🏽

Telesini just sound better and it’s easier for me to say. It useful if you are shooting out in nature where there are no people around which is what I like to do so it’s most definitely not dumb to me. If it’s raining I’m not shooting outside so that doesn’t bother me either. So for me it’s pretty perfect! Glad your Hohem works well for you but after a quick search I wouldn’t get it, action cams have amazing stabilized footage so why a gimbal for it? That seems dumb.

@@PRTPHO So, you agree it has shortcomings, but ignore them because it suits you? Right. And why get a gimbal for an action cam? Well, tracking for starters, plus the ability to power the camera through the gimbal. Then the extra reach it gives me in certain situations. In good light, I turn off EIS in the camera and avoid any cropping of the image. And, in low light, I can turn off EIS in the camera and avoid light jitters. Seems very sensible to me. And did you not suggest action cam users might like this TELESIN device?

It may have shortcomings for some people but not for me. I didn't talk on them because those are not issues that would affect how I use it plus those weren't issues that came to mind, and since I'm reviewing ti after using it then I can only talk to my experience with it. Not being weatherproof is not something thats a downside to me. Glad you pointed it out, this is exactly what the comment section is for so nice work. Thats such an amazing point as to why for you the gimbal is such a useful tool, seems like it give you a lot of benefits, I'm like super happy for you :) They might like it and if they do they can get one, if they buy it and it doesn't fit their needs then they can return it haha

That’s alright 💅🏽

u should see the content he is presenting instead . he did a great job with the video and explanation

Thank you!’ I appreciate that! 🙏🏽🙏🏽🙏🏽

That’s why you would want it cause tracking is its main thing, I already have the Pocket 3 and I love it so it’s perfect for this Telesin Smart Tracker, allow for the 360 tracking and tilt tracking because of the Pocket 3

Ahhh I see what you are talking about! Didn’t notice those mounting points but that’s with the ulanzi action mount which adds bulk to the set up if all I need is a 1/4”-20 thread! But if you do use that system then it’s super useful! Thanks for pointing that out! 🙏🏽

Thank you so much! I appreciate it! 🙌🏽

Of course! It was nice to get decent results for me and for y’all as well!

Gotta use those leading lines ya know haha and thank you so much! I guess consistency and hard work pays off 🎉🎉🎉

Thank you so much! I’m glad I was able to help out, let me know if there is anything in particular you want to see or know 😁

That’s fair! It depends on the situation, if I’m using it for travel then there are instances where I like to have the smaller grip (if I don’t need the extra battery) so I can connect the tripod, but if I’m just going out on like a little outing and I know all of it will be hand held then I leave the small handle at home to keep the P3 more manageable I do wish they would have gone away with the small handle and added a 1/4” mounting point to the P3

@PRTPHO yeah that's what I mean, I don't ever use it without a handle. My hands are too big and it's way too small for no handle at all. I'm also always filming through most of the day when in use, so there's never really a time I wouldn't be utilizing the battery handle to extend the life of the p3 for that day's use.

For sure! Long term use the battery is 100% necessary! But hey I just figured I’d show all the scenarios I had in mind just in case! Have you ever bought a second battery grip?

Yeah, that was my conclusion, I’m gonna be posting a comparison video between the two just to show the findings

@@PRTPHO thank you 🙏🏻

No problem! Thank YOU for watching! 😁

Wow thank you so much for the constructive criticism! I appreciate it very much! Saying technically is definitely a crutch 🩼 of mine so I’ll do better, ether to not say it or edit it out haha 🤣 I didn’t I didn’t mention it because I couldn’t think of the word and I called them something else when I recorded it, but I guess I could have done an annotation on the screen. Thank you so much for watching it 🙏🏽 and yeah the Neewer is definitely my he winner, it’s still attached to my poket 3 haha

😁😁😁😁

Hey L4P! Thank you so much!!! I’m using the Fujifilm X100vi

It makes it easier for me while making the video to show the things, but I guess I can mirror it back in DaVinci Resolve so y’all can see it correctly! Thanks for pointing that out! I appreciate it! 🙏🏽

Cause I mounted the camera to the table! 😭 But I fixed it! I know have it on a Round Base Monopod so that will stop happening! Thanks for pointing it out! Let’s me know it was too obvious 😅

Thank you so much! I appreciate it! 🙏🏽

I’ll have a video coming soon comparing both cages and fans, in that one I do 4k 60p (sorry about not having it in this video)

I mean I definitely wouldn’t like that so definitely gotta have the screen pointing back

Thank you so much for the Sub, means a lot! Definitely let me know if you like it! I mean it’s definitely one of my favorite film gear since it makes things so easy!

I’m 5’6” and I use it as a crossbody! I do like to have them on a short leash so even with the Clever supply one it’s not all the way extended when I use it as crossbody

​@@PRTPHO thanks for the response brother. Would love to see an update video of how the strap patina'd

Of course! As soon as I’m done with the videos and have in line I’ll make one 😁

You get overheating with the OP3? I didn’t think it overheated since it’s never happened and I’ve never heard of it

It is so frustrating wanting to use the pocket 3 to record performances and to have it overheat. (Using the dji cage and without it)

Are you recording outside in the heat and in 120p?

@@PRTPHO actually inside in a church. I am recording in 30 fps and am turning off the screen during record. After 10-15 minutes the unit cancels the record due to heat. I am glad to hear that there is hope... it is just a matter of finding the time to do a lot more testing

Interesting! I just started a test at 4k 30 with the mic connected as well! I’ll keep it going until it overheats and let you know what I get! This will be with no cage installed

That’s just my edits on it!

@ yeah and in my opinion they make the photo different from what it originally was. why not show the original? if it doesn't matter, it should look just as good

But it does matter cause that’s how I wish to edit my photos, it’s like asking a painter to do the same painting but with different colors, one has the freedom to make their art however they want! 👍🏽

@@PRTPHO okay yeah thats a valid reason, I will go about my day. farewell internet stranger

It was good talking to you 👍🏽 farewell!

Si tú quieres te lo…. Aquí haha

Thank you! 🙏🏽

It sounds like you’re facing a common issue with older Rosetta Stone products due to their transition from CD-based software to a subscription-based model. Why Are Units Locked? 1. CD Activation Servers Offline: Rosetta Stone no longer supports CD-based versions actively, and the activation servers for these products may have been retired, making it impossible to unlock additional units. 2. Account Synchronization: While your progress may still be visible on the app, it’s likely tied to the subscription model, not the CD set, causing a mismatch. 3. Transition to Subscription Model: Rosetta Stone has shifted to online subscriptions and may be encouraging users to migrate by limiting functionality of older products. What Can You Do? Here are some steps you can take to regain access to your Swedish course: 1. Contact Rosetta Stone Support: • Reach out to their customer support with proof of purchase (receipt, serial number, or account details). • Explain your situation, and ask if they can either unlock the remaining units for you or provide access to the equivalent online course. 2. Check Legacy Software FAQs: • Visit the Rosetta Stone support page to see if there are updates, patches, or workarounds for older CD-based products. • Sometimes, they offer discounts or free subscriptions to compensate for lost access. 3. Try Offline Activation: • If the software allows manual activation via a code or file, look for an offline activation method in the settings or user manual. 4. Use a Virtual Machine or Old Computer: • If you have access to an older computer with the CD version installed, you might be able to run the program there. Alternatively, you could set up a virtual machine with an older operating system compatible with the CDs. 5. Transition to a Subscription Plan: • If you’re unable to unlock the remaining units, Rosetta Stone often provides discounts for transitioning to their online subscription plan. While this isn’t ideal, it could allow you to continue learning where you left off. You can send this to Rosetta Stone Support: Subject: Assistance with Unlocking Units in Legacy CD-Based Swedish Course Dear Rosetta Stone Support, I purchased the Rosetta Stone Swedish CD set several years ago for approximately $300. I had previously reached Unit 4 using the desktop program and mobile app. However, on my current setup, everything beyond Unit 2 is locked. When I attempt to activate the software: • The desktop program indicates a lack of internet connection (even though there is one). • The mobile app acknowledges my progress up to Unit 4 but also shows these units as locked. • Attempts to reactivate the product redirect me to your website to repurchase access. Given the significant investment I made in this program, I am seeking assistance in either: 1. Unlocking the remaining units in my CD-based version, or 2. Transitioning my purchase to your current online subscription model without requiring an additional fee. I can provide proof of purchase, the product serial number, or any other details necessary to verify my ownership of the program. Thank you for your attention to this matter. I look forward to your response.”

⚽️

Capital Cities ~ Safe and Sound

Capital Cities ~ Safe and Sound

Capital Cities ~ Safe and Sound