DIY Bubble wall | easy colourful LED water bubble wall | JOY in DIY
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Hello everyone,
In this video i made DIY bubble wall.
you can make this to decorate your home, n make it look more colourful.
this is really easy, budget friendly, attractive, beautiful and relaxing.
the rainbow colors add beauty to your house in dark too.
You can buy air stone , air pump, aquarium tube, 3 way connector in aquarium shops or buy through below links.
Things required,
polycarbonate sheet.
Air stone. Buy link - www.amazon.in/...
Air pump. Buy link - www.amazon.in/...
aquarium pump tube. Buy link - www.amazon.in/...
3 - way T - connector. Buy link - www.amazon.in/...
araldite. Buy link - www.amazon.in/...
M-seal. Buy link - www.amazon.in/...
sand paper.Buy link -www.amazon.in/...
LED Strip. Buy link -www.amazon.in/...
You can also buy air stone,air pump,aquarium tube,3 way connector in aquarium shops.
To watch our previous videos,
• Stocking flower branch...
If you like this video like,share n subscribe.
If you have any queries comment below.
I used your information to build a wall 24 inches wide and 48 inches tall, your information was extremely informative, thank you. I found the design has a couple short comings I think I have fixed. The first is that the recommended air-stone does not give a consistent bubble pattern, some chambers had larger bubbles than others. I changed to a man made air-stone (TOP FIN BUBBLE WALL) is the brand which has very consistent bubbles. Second the design does not allow you to fill the chambers to the top with water, because bubbles rise up several inches above the water level and spill over the side leaving everything wet. I glued a plexiglass strip to the top making a cap and sealed it air tight. Then I drilled small holes .060 diameter in the cap centered on each chamber. This allows the chamber to breathe and does not allow the burst bubbles to come out. Additionally, I drilled one larger hole on each side of the new cap big enough to allow filling and put a plugin the hole that has a small hole to allow the plug to breath. This allows the water level to be within one inch from the top without bubblles spilling over the top. Last comment is GOOP brand clear adhesive seals everything peerfeectly without the needed to use any other adhesive. It is readily available in big box stores or on line. Thanks again fun project to build.
Thanks a lot😄😄
Thank you for that!
Plz made a video
Can we made this for 4x7
I need your help bro
I love the waterfall wall. This is exactly what I want for my bedroom. I'm doing a forrest theme with a waterfall. Thank you for this video.
Brilliant!!! I always wanted a water panel, but they are so extremely expensive... This is the perfect solution, thanx a lot, its beautiful!
Thank you so much😊😊
Very Cool Idea. Thanks for Sharing.
thank you😊. stay tuned.
Hi joy i have a question?...u didn't sealed off the top what if i have to seal the top..how can i do it? As i am making for ganpati decoration
Hey me too
🙏सरळ आणी सोपे आहे ताई💐
Looks like a beautiful display piece! How loud is the air pump? I'd love to build something like this for my room but I don't want an annoying buzzing going all day
Thank you😊.we used aquarium pump. If you have an idea about aquarium you may know it's sound.
Wow now that's true beauty love it so cool
❤❤❤😂😂😂
Very very good work 💥it
Thank you so much
This is excellent! Be careful with that M seal though, I don't know anything about that product directly but it seems very similar to other 2 part putty and typically you must handle those with gloves for safety! Any other viewers might wanna double check the package just in case!
Thanks for the tip!
Hats off to all your efforts.
thanks a lot 😍
Very nice 👌👍👍
Thank you
Thank you very much for sharing your ideas
Our pleasure 😄😄
Wow beautiful I love this...
Thank you so much 😁😁
Excelente trabajo , nada laborioso felicidades desde Guadalajara Jalisco México.
Zabardast, mind blowing
Thanks a ton😄
Awesome design and concept. I have a question in mind, how do we connect the led strip wires and from where do we get power, please show any videos how to connect and complete the circuit. Thankyou
Just connect the Led strips to adaptor
Awesome work
Thank you
Wonderful 💎💎💎💎💎
Thank you!!!
Genius... but one question on my mind... when the waters get dirty and causes algae for long period... how to wash it?
Thank you 😊.
If we pour distilled water , it doesn't get dirty and have less chances of forming algae.
And keep replacing the water once a month.
@@JOYinDIY I was looking for it sooo long. Thanks. Fr DIY . Let me try for my home. I ll share pic for you after lockdown
@@ssharma1304 sure try it😀
Nice question dude
Make 5% alcohol and 95% water mixture and you only need to replace water every 90 days.
Formula for making 5% alcohol from 100% distilled water and 70% IPA is
IPA = 0.073*DW
Beautifulllllll🙏🙏🙏🙏❤️❤️❤️❤️❤️❤️❤️❤️❤️
Love from Karachi Pakistan ❤️❤️❤️❤️❤️❤️❤️❤️
Thank you very much😊
This is so cool work. I am going to try this soon👍
Thankyou😊..sure, try it!!
Can you tell me the size in square feet you have used polycarbonate sheet for the bigger bubble wall you made? Please do reply...thanks in advance
It is of 1 feet × 5 feet.. i.e,..5 square feet each. I made two of them.
Best video
😊Thankyou so much
I could watch it for hours
Thanks a ton😍
Wow
😊😁
Очень Красиво!!! Look
😊thankyou
Look very nice, just wondering... can you make the bubbles in a bigger size?
Thank you 😊
Size of bubbles depends on airstone..however small bubbles look good to that wall thickness..
Kitna kharcha aata hai? aur samaan kahan par milega?
Looks beautiful
Super
Thank you so much
hello JOY in DIY! i have discovered your channel today and all the work you have done is really worthwhile to watch. but i have a question! im building the same thing but for a size of 5X5 sq ft area. and the air stone is of only 12 inches!! is there any way to extend air stone?
Absolutely love your creativity, I'm so glad I found your channel. Will recommend it to my family and friends, we are all crazy DIY people :)
Thank you sooo much for your lovely comment 😍..sure recommend our channel n stay tuned..😊
I want to know how much they cost
Wow superb frnd
Thanks a lot😁😁
Nice 👍 I am planning to do and I want to know what is the sheet thickness you used for this work ..?
It is 10mm twin wall hollow polycarbonate sheet.
@@JOYinDIY is it twin or thin please confirm
@@srikanthj3458 It is twin wall ....also called as multi wall polycarbonate sheet.
@@JOYinDIY where we can buy it
Hi...it's an amazing work...it looks beautiful...I want to make, just assist me with few things. Can I make it 5 feet(height) by 7 feet. And if I have to buy locally where to look. Thanks in advance.
Thank you😊
You can make two seperate bubble walls of 5×4ft each
Because the maximum size of air stone available is 2 feet.
Sell will ship me the desired size
Bro can u provide me polycarbonate sheet 4*6 ft size. Plz
Hi it's really good but water not leak in the machine side and how much cost it is
From where i can buy polycarbonate sheet plZZ help bro
Nice information than others video about bubble wall
Awesome work
My requirement is of 10.5 inch
air stone of 10 inches is not available suggest me if you have any idea
Thank you😁😁
Try to use 12 inch airstone..and you can seal the left out part of airstone with m-seal.
How to remove water from the bubble wall
just remove the pipe from airstone.
Wow nice creative lamp.thank you for this tutorial👍👍👍
I just have a question. So if you turn off the power how the water will run back the blower or no?
Nyc Akka..👍
Thank you so much😃
Hello where can i purchase the polycarbonate sheet both online and offline need this bubble wall for ganpati decoration thanks
beautiful, but made with crooked hands, it will do for a garage
mind your crooked hands ..and if u can just appreciate the creativity
It looks nice. I wonder if you can use oil instead of water?
Thankyou😆😆
Nooo!! Use distilled water..to avoid damaging the transparency of wall
@@JOYinDIY Oh ok. Yes so no mineral building hazes the glass, or plastic walls. Lava lamps use oil though, and they look pretty good. I wonder if there is a good blend mixture of water, oil, food coloring, etc. that could be used to enhance the effects?
Ok but using LED lights will give you good color effect..try it😊
Super sir ji
Thanks a lot😊😃
Beautiful 😍
Sema super sir well dome
Thank you very much😊
Look so NICE and BEAUTIFUL... How strong is that AIR PUMP to get all those bubbles up? 40 gallons, 60 gallons, or 100 gallons pump?
0.15 Mpa is enough for pumping air pressure.
Kya isme har bar pani change krna padega
Thanks for the information you shared.. it's nice .. from do I get polycarbonate sheet?? Link pls. ..
dir.indiamart.com/impcat/acrylic-bubble-wall.html
Hi can I make 6feet x 1 feet wall using same material mention in description or should I need anything extra?
You wall looks very awesome
Thank you😊 .
At the end of the video , you can check our 5ft×1ft wall . You only need polycarbonate sheet and led strip extra according to your dimensions.
That's great. Thank you.
What about the airstone? Should you get one that fits the 5ft length?
@Solomon Wachira
Yes. You should buy.
Brother can we use glue sticks with glue gun instead of m seal on stone filter please tell means to stick carbonate sheet with stone filter can we use glue gun glue
Brother you have not given link of polycarbonate sheet pls provide
Wonderful idea
Link for polycarbonate sheet is missing
Great and informative video.
Thanks for sharing. Could you confirm how much it will overall cost and time to built this? And man power too?
Awesome 👍💐⭐🤘
Thankyou☺️
op build very satisfying
Thankyou somuch😁😁
I wanted to know the name of the material that you did this waterfall instead of getting glass, and whether it was plastic material or not, instead of glass.
We used polycarbonate sheet, it's a type of acrylic material.
So nice
Thankyou😊😊
Really nice video but where from I can get polycarbonate sheet? Please suggest.
Thanks, I made 2 pieces of 24×36 inches
👍😊
@@JOYinDIY instagram.com/reel/CTm8whqKr5P/?
Can u me build 6x10 outdoor glass water falls
wowwwww nice.
Thanks a ton
I've made the same model with sheets of 1 feet after applying mseal and araldlite still leakage is happening idhar navratri ke 9 din baad bhi hoyega ki nhi bhaya
absolut wonderful
I wanted to build same for 3x3 ft wall. U used bubbler as air stone but if for 3 ft do you have any suggestion? And after some days air stone may get block due to water impurities so how can we replace ?
For 3ft you can use 2 airstones.one of 24inches and one of 12 inches. They are also available online.
If you pour distilled water,airstone has less chances of getting blocked.
I have self made a air stone from a nylon pipe but his come not far the bubble i do know how that can i 43cm long with my pipe
Yea i have only the screen making and self a airstone from a plastic pipe and hole making in a pipe but his bubble not in any hole i think i must a Tpiece for more power is that wy you doing a Tpiece on your air pump?
Making Holes for pipe doesn't work according to me.but using T will increase air bubbles
wowww.. nice! I will try mine.. but I saw in the end you got big one, where can we buy this sheet? so cool so great!
I am from Brazil.
I got doubt too... After to use in the bottom the air stone all pressure of water wont make it go out?
Thank you so much ..and your doubt, leave some Gap on top after filling water and water won't come out
Quedó superhermoso.
Tengo dudas.estamos haciendo en casa uno igual.usando policarbonato igual.las medidas son 1.50 de alto y ancho 78 cm.mi pregunta es a que altura maxima debe estar la bomba de la manguera.pq lo pusimos 2metros separados y echaba pocas burbujas y de pronto solo echaba en el medio por un solo hueco.favor responderme..
Can i know the height of wall? 1.50 feet or any?
@@JOYinDIY buenas.1.50 metro alto y 78 cm ancho el tamaño del muro de burbujas.pero el compresor lo tenemos encima del techo para esconderlo y no se viera feo
Sir please help me initial stage while I am sticking M-Seal and polycarbonate sheet, water is not holding...shall I use araldite over the m seal for leakprofing
Yes you can.
beautiful 👍
Thanks a ton!!!!😀😀
I want 32 inch air stone & Good quality..plz help sir
You can use 24inch and 8inch air stones..rather than 32inch
This is very beautiful can sir can u make for me I'll pay for this ..plz reply
Thank you for this great job. Can I use alcohol as an alternative to water because the water will become algae in it after a period of time?
Probably but better to use lower concentrations or it will smell / evaporate faster
Thank you 😀
You can use distilled water..it have very less chances of forming algae
Thank you for the advice and response 🌿⚘
Question can I use mineral oil instead of water? Also can a small table top one be made? Thank you for the fantastic demonstration...
Thankyou😊.You can't use mineral oil. I think bubbles won't form in a good way and yes you can make a table top one.
Grt wrk! Hw u got poly Carbonate sheet from ajjio.bcz minimum order quantity is 150ft....can u pls let us knw
m.indiamart.com/proddetail/3mm-multiwall-polycarbonate-sheet-20376619533.html
Try this link
@@JOYinDIY tq so much
We are selling (polycarbonate sheet only)
Let us know Where you stay?
1ft x2ft (1ft L * 2ft H * 10mm thickness) polycarbonate sheet(only) costs Rs.300 +delivery charges.
@@JOYinDIY how to contact u??
Can u help me for set up?
Hello! If I may ask , is it possible if you can make one for me? And how much ? I want the one that stands on the floor
Amazing
Thankyou😁😁
Where to get polycarbonate sheet any link?
Muje bhi chahiye
Penyekat ruangan akuairum dimana belinya atow menghubungi kemana berapah harganya
I'm planning to do a 6ft x 9ft version of this...... I'm living in a temperate climate country, Does the polycarbonate sheet easily gets dirty or yellowish in a few months? Pls I need an honest answer before doing this project and thank you in advance.....
Always honest😀.. polycarbonate sheet doesn't turn yellow n I suggest you to use distilled water to avoid it getting dirty and also Airstone getting clogged..
@@JOYinDIY thank you..... Hope to see more projects from your channel.......
Fantastic
Thank you so much 😀
Where to buy polycarbonate sheet?
Sangat keren lampu hiasnya.
Thanx for this video
Our pleasure😊😊
Led light kaise lagayi side me usko chipkaya hai kya
Can you make one product like this for me?
Where should we get polycarbonate sheet
Small dbt mseal u have used only one side to stik or both sides?
Both sides.so that water does not leak
One question in mind what happen if we switch off the airstone water will reverse to air pump and damaged it or something else kindly reply
Place the pump above the water level..and nothing will happen when you switch it off..
He joy can you share link for polycarbonate sheet link pls and i want to make it in size of 48*48 pls help
But where do you get the main thing - the polycarbonate sheet?
dir.indiamart.com/impcat/acrylic-bubble-wall.html
Wowowowowowowoowow
Thankyou😁😁Glad you liked it so much
@@JOYinDIY I'll try to create in the future 😆 thank you
Sure...do It!!😄😄
V good
Thankyou☺
please. What is the name of that basic board. And where I find him