Sealing of the bubble wall bottom. DIY bubble wall. Part 2
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2021
- The video shows how the sealing of the bubble wall bottom is achieved. This is the second assembly step from the DIY Bubble Wall video series.
Sealing the bottom is an important and essential part of the entire air bubble panel assembly.
Because if the panel suddenly leaks, then all your efforts, creative discoveries, know-how and skillful hands on its invention will be in vain. Among other things, it can just turn into a disaster for you and your neighbors on all floors below. This must be borne in mind, since a 2x1 meter panel holds about 25 liters of water. I myself struggled with this problem for a long time until I settled on the variant shown in this video. Honestly, I am still not completely sure of the impeccability of the hermerization and when I go on vacation, just in case, I drain the water from the panel. And I advise you the same. Of course, I take no responsibility if it doesn't work for you (see below).
Used glue
- Superglue for plastic
- Egosilicon 300 amzn.to/3Dxw30X
The panel itself consists of double-walled Plexiglas or polycarbonate.
More videos on the topic:
- Air nozzle assembly. Initial phase. Part 1 • Luftdüsen Montage. Anf...
- Installation of air system and LED lighting. Part 3 • Luftsystem und LED-Bel...
- Assembling the frame. Part 4 • Rahmen Montage. Wasser...
- How to make a bubble wall from the acryl double panel • Wasserwand aus Plexigl...
- Bubble Wall Panel Installation • Wasserwand Montage
Disclaimer: The information in this video is provided for educational and entertainment purposes only. The video's author is not responsible for any losses, damages, or other consequences that may result from the use of the information presented in this video. Perform all tasks at your own risk.
#bubblewall #diy #doityourself - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ(ไทย) vs Kenta Nishimoto(ญี่ปุ่น) รอบ 16 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/kaQRLljJkSI/mqdefault.jpg)
Good job sir, but would you please put a link for the led strip?
LED strip, 6m waterproof amzn.to/3yX5JNd
Hola ,hermoso tu trabajo. Hay alguna posibilidad que puedas enseñarme cómo se prepara la parte eléctrica por favor. Gracias de Chile
La parte eléctrica la encontrarás en otros vídeos
i love it work it so much. where can i buy this panel.?
i also want to do this work .
Hi
Sorry what is the material you are using in 38 th second?
I used plexiglass for the bottom, but it didn't work
Would please let me know and if possible share a link of it?
Thanks
This is a strip cut from a plastic sheet. A strip of plexiglass is even better, as you did. It must be glued to the base of the board and then covered with a profile ebay.us/DYOSCQ, having previously lubricated it with plenty of glue amzn.to/3Dxw30X. This must be learned.
I want to learn this.
To learn, you must try to do it yourself
Did you build that acrylic panel yourself??
No, I bought the panel itself
el panel ya lo venden así o tú lo armas??
what is the name of the white thing you installed, I am having a very hard time finding it in Indonesian stores, greetings from Indonesia🙏
the thing that you installed after you punched a hole in the acrylic, which is shaped like a shirt worm, I am very confused about buying it at an Indonesian store, thank you sir
All things are described here th-cam.com/users/postUgkxuAY0RlYl5_gsOnxBa3WsSrJISKL-zyt0
th-cam.com/users/postUgkxwhcUyLOBggNipG6Y63moMUtcP-JCsATb
Can you please share a link so from there i can buy it. Couldn’t find this one in uk . Request
no link
Muchas gracias
What is the name of the glue you are using?
Depending on the application, either ordinary instant glue for plastic or transparent glue Fix All Crystal von Soudal / Egosilicon 300
Hola , el agua del panel de burbujas abría que cambiarlo o no se pone verde nunca
Hay agua destilada en el panel, nunca se vuelve verde e inodoro. Pero se evapora, por lo que debe agregar.
Hallo, haben Sie einen Link für die Plastik U-profil sowie plastik Stück was sie da als erstes Kleben und vom Kleber einen Link.
Super arbeit, es sieht einfach nur Traum aus :) Mfg 🙂
toom.de/p/u-profil-polycarbonat-transparent-980-x-16-mm/3400598
That bottom sealed plate and u- shap tupe link please
toom.de/p/u-profil-polycarbonat-980-x-16-mm/3400031?bbo=2
Which glue use acrylic to acrylic fix
amzn.to/3NklpQT
Where to get this acrylic panel
amzn.to/3DBc7dE
Where can i buy the polycarbonate sheet which you are using
I've been looking for sellers online close to home. In the Community tab of my channel you will find all the components I used
Where i can find acrylic panel?
Search in your country on the Internet for such a panel: amzn.to/3DBc7dE
Здравствуйте! Подскажите чем герметизируете? Что за материал, и клей?
Клей момент для пластика и Egosilicon 300 для U-профиля. Панель из сотового плексигласа или поликарбоната.
@@aqualdostyle ответ на все мои вопросы, спасибо!
@@aqualdostyle bitte, welche länge und breite hat das plexiglas womit sie das untereteil versiegeln? 1:05
Und welche Stärke hat es?
Wo kann ich es besorgen?
@@angiejezsoo4142 Siehe die Abmessungen in der Video Beschreibung th-cam.com/video/QRsspBRGN0M/w-d-xo.html
@@aqualdostyle vielen lieben dank für Ihre schnelle Rückmeldung, das habe ich aber nicht gemeint.
Ich meinte, in diese video wo sie das stegplatte von unten versiegeln (das wasser von unten nicht rausläuft ) mit einem flexible acryl Streifen ( davon bräuchte ich die Abmessungen und Stärke) bitte
Vielen Dank
Where should I get this panel sheet?
search the Internet amzn.to/3PemDyJ
plz where can i buy this panel..
I'm not selling the panel, I'm just showing you how to make it yourself
Cuál es el presio necesito uno como lo consigo o donde se venden?
bomba shego ws3 amzn.to/3EAchmK
What type of air adjustment valve do you using?? And check valve too??
Shown here th-cam.com/video/5AzJ086es-Q/w-d-xo.html. Aquarium check valve
Yes Sir , I saw that video too. But you using that green air nozzles looks different from other normal air nozzles.. how can you calling that green air nozzles?? Shall you please...
@@sridharjo7413 The nozzles are shown here th-cam.com/video/u6_3bEf8Mro/w-d-xo.html
I won't like to disturb you again again sir . Please tell this only, Have you any link to buy that air nozzles and air adjustment valve too???
Thank you for replying me
Qual é o nome dessa placa de acrílico, onde posso comprar
Láminas acrílicas para paredes múltiples Plexiglas® de 16 mm, transparente, espaciado de 64 mm, sin revestimiento de caída 980 mm x 2000 mm (ancho x profundidad)
ebay.us/xAFfjL
Tấm Nhựa có khung rỗng từng ô mua ở đâu vậy ạ
try to find such a board on the Internet near you amzn.to/3PemDyJ
There's any training?
In my videos I show how you can do it yourself
hello sir , im in india.
Eso es acrilico ?
Sí. En la pestaña Comunidad de mi canal aparecen todos los componentes
Hola cuál es nombre de panel
Ver descripción del vídeo.
@@aqualdostyle gracias
A course of this content could be created, make one for us, your followers!
এটা কোথায় পাওয়া যাবে? আমার দুই সেট লাগবে।
I show you how to do it yourself
plz help me.
Ich brauche den video teil mit 0:20 sek.
Was ist aus dem Gezeigten nicht klar? Ich habe kein anderes Video
герметик воду не удержит. Протечет через неделю. Да дядька и сам уже все это узнал. Поэтому и забросил канал. Если бы все было так просто, эти панели делали бы все кому не лень. А в реальности на всю страну не больше десяти нормальных контор.
Конечно держит, силиконовый клей для аквариумов, как показал. Конторы у меня нет, панели не продаю, сделал для себя и делюсь этим, работает уже несколько лет