thats great. Im going to try one of the now easy to get repeater kits for the baofengs that seem to take care of the ptt etc..... i may even consider an arduino interfaced to the squelch pin you mention if the kit doesnt work. Ive made several kits in pelicases in the past both for personal and commercial use. Those fans are going to ruin your kit, they will suck in all the moisture outside and wreck it.......... there isnt much that can be done for a low power option regarding heat, if its even a problem, your main killer will be siunlight so always keep it in the shade..... you could possibly use a heatpipe glued to the radios heat source and then run it to a heatsink thats protruding outside the case, then silicone all that back up to make it water tight again???? my internet connection is currently a 4g capable router, connected to two yagis that are on a pole bolted to my chimney......the router is inside a pelicase. i run cat 5 and power out of the pelicase into the house, its great...... much better than the satellite i was using before. Im making a repeater with baofengs for sure, probably it will end up having antennas on my pole and the radios in the house.
Hi, i have made a repeater with 2 Baofeng uv-5R , similar like you. Just having some interference problems. I have a small power supply converter 12v, to 2 outputs of 7.4v for the 2 radios. That way 1 power suply 12v with 25 amp its more then good for both radios. Do you think it may be used some filter in the power of the radios to drop the interference? Or mabe use other typ of antenas, what you think?
@@artistandcamera3245 To my knowledge, That can be resolved removing the ground wire from 3.5mm to 2.5mm (or whatever aux cable). I did it on mine by stripping the wire, finding ground (mine was obvious, just copper wire).
Please can you tel me ,to make repeater need necessary part,in my country there is no part at all,so we have to order it another country,if we may need it can you send me a single part to assemble in our own
![[EP.01] ดูฟรึตอนแรก LOL: Last One Laughing Thailand Thailand หัวเราะทีหลังปังกว่า | Prime Thailand](http://i.ytimg.com/vi/t4KunBRKn3s/mqdefault.jpg)
I love your repeater setup. It gives me ideas for my own. The video stabilization is difficult to watch.
This is real ham radio I bet you could sell as many of them as you can make
that is an amazing set up good job
Very nice job, thanks for sharing your ideas.
Awesome setup.👍🤠
Great work. Thanks for sharing.
nice portable repeater
thats great. Im going to try one of the now easy to get repeater kits for the baofengs that seem to take care of the ptt etc..... i may even consider an arduino interfaced to the squelch pin you mention if the kit doesnt work. Ive made several kits in pelicases in the past both for personal and commercial use. Those fans are going to ruin your kit, they will suck in all the moisture outside and wreck it..........
there isnt much that can be done for a low power option regarding heat, if its even a problem, your main killer will be siunlight so always keep it in the shade..... you could possibly use a heatpipe glued to the radios heat source and then run it to a heatsink thats protruding outside the case, then silicone all that back up to make it water tight again????
my internet connection is currently a 4g capable router, connected to two yagis that are on a pole bolted to my chimney......the router is inside a pelicase. i run cat 5 and power out of the pelicase into the house, its great...... much better than the satellite i was using before.
Im making a repeater with baofengs for sure, probably it will end up having antennas on my pole and the radios in the house.
I would love to see a new build with new tech at low budgets
This is awesome, do you have any updates?
Excelente equipamento gostaria de montar um também
I've got a surecom controller that doesn't rely on VOX, but the ID-O-Matic 4 ... that's what I want and should have got.
What's up with all the camera glitches?
Whre did you buy your antenna connector for baofeng?
Can you please provide some info on the battery pack I cant find anything like you described that can be charged by solar. Thank you for the video
can you do a video in which you explain the cor architecture? Thanks a lot
Those switch circuit supply is going to affect reception, it desenses baofoeng hts aside from being affected by your transmitter
How far does it go?
Baofeng interface circuit?
Excellent I’m in how much to build me one!!
Hi, i have made a repeater with 2 Baofeng uv-5R , similar like you. Just having some interference problems. I have a small power supply converter 12v, to 2 outputs of 7.4v for the 2 radios. That way 1 power suply 12v with 25 amp its more then good for both radios. Do you think it may be used some filter in the power of the radios to drop the interference? Or mabe use other typ of antenas, what you think?
Que frecuencia usaste?
Very. 144mhz to 148nhz... VHF to UHF also.
Was not very good.
What brand cases are they?
Excelente setup.
Can you please post the parts with serial number you used, I like to make me one.
Thank you WRUH751
Where is the cooling exit?
I would like to see it work 1 time mybe a range test.
What is the advantage of using the controller instead of the direct connection of the Rx output to the Tx input?
I've tried direct and because of general noise, etc, I found that it gets stuck in transmit.
@@artistandcamera3245 To my knowledge, That can be resolved removing the ground wire from 3.5mm to 2.5mm (or whatever aux cable). I did it on mine by stripping the wire, finding ground (mine was obvious, just copper wire).
@@artistandcamera3245 if you just buy a regular 3.5mm to 2.5mm audio cable the ground in that cable grounds the TX so it sticks in TX.
Links to the parts would have been sweet
Please can you tel me ,to make repeater need necessary part,in my country there is no part at all,so we have to order it another country,if we may need it can you send me a single part to assemble in our own
No
Go Gadget GO!
HAHAHA
You would be better off using a UHF duplexer and they are inexpensive at your power output.
Bow-fang. Not Bo-fong.
YU7MRN Pozdrav iz sombora...srbija
thing is its battery powered and solar is the recharger ...i call click bait ...listen watch learn nothing new