How to change rear shock absorbers on AUDI A4 B6 TUTORIAL | AUTODOC

How to change rear shock absorbers on AUDI A4 B6 TUTORIAL | AUTODOC
Top brands that produce Shock Absorbers: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
On our website you will find a wide range of auto parts you are interested in: goo.gl/3n2IRL
Shock Absorbers: goo.gl/Cqi7Iv
Shock Absorbers for AUDI : goo.gl/TyBpAj
Shock Absorbers for AUDI A4 B6: goo.gl/qcOfMi
AUDI Car parts: goo.gl/Fwtn2G
Mobile Shop: m.autodoc.co.uk
► How to replace Front wheel bearing on AUDI A4 B6 - • How to change front wh...
► How to replace fuel filter on AUDI A4 B6 - • How to change fuel fil...
► How to replace motor oil and oil filter on AUDI A4 B6 - • How to change Engine O...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
TH-cam: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.c...
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.c...
❱❱ Install the AUTODOC CLUB App - club.onelink.m...

[@seanhannon2667]

wow this dude makes it all look so very easy.....I think he may be an android.

[@nathanfrancisco7148]

I was thinking the same thing. I would've made up 10 new curse words by the time I'd have to remove the dust guards. Great vid though. Nice & clear.

[@DaytonCarCare]

Most German car's rear shocks or struts are really not that difficult to change out. I've been doing it a long time to Audi, BMW, and Mercedes. Did a complete swap with two Audi A8s from stock struts to coil overs swapping from the other A8. Did it all in an afternoon using only a jack and jack stands and no lift. So I'm talking 8 shock/strut assembles all together.

[@UhMusingArt]

Well I had a few f-bombs. Probably easy with a good air impact. Cordless impact wrench wasn't strong enough to remove the bolt. You can only fit a box end wrench on the nut. Had to turn it 15 degrees, flip, turn, flip...until I could go back and remove the bolt. Needed a 16mm for the nut on the end of the old shock. (New one was 17mm). Installation was very easy. All bolt threads still perfect.

[@-kilian-]

Would wheel alignment still be neccesary after replacement?

[@hannatildanagy8280]

Hi, could you do a clutch replacement job video too?

[@autodocuk]

Thank you for your comment!
Such work is very complex and time-consuming.
We do not think that we will carry out the work of this level of complexity.
We strongly recommend that you make such replacements only at the specialized service of your car.
Best Regards,
Autodoc team

[@mikeadrianpasigna9926]

Does the 2006 audi a4 b6 have different shocks from the b7 model??

[@autodocuk]

Thank you for your feedback! It's absolutely right - such difference in the shock absorbers may depend on the component parts for the same model. If you want to check suitable car parts for your vehicle, please, contact, our Support Team, and our managers will surely try to help you. Best regards, Autodoc.

[@failussaleh9581]

i have a question ,,is the absorber , A4 B6 &B7 is the same?

[@autodocuk]

We do not have such information, we recommend that you consult your mechanic.
AUTODOC

[@TheTwoDrummers]

Is it the same on sedan and avant?

[@autodocuk]

Thank you for following our channel.
Yes, the replacement procedure is the same on the Sedan and on the Avant
AUTODOC

[@heanstone1327]

Please for the love of God use a torque wrench, impact gun is NOT the way to go.

[@autodocuk]

Thank you for your feedback.
We understand that mistakes were made during the replacement, in the new videos we have already fixed all these mistakes and we are trying to show the replacement using a torque wrench in compliance with all norms and rules.
Best regards,
Autodoc team.

[@Erix7810]

This doesnt look that terrible. probably take me two hrs to do both...?

[@autodocuk]

Thank you for your comment!
On average, a replacement will take no more than one hour per side.
Best Regards,
Autodoc team.