Encoder Connection with Parker DC Drive and Testing By Automation BD
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- Parker DC Drive Encoder Connection and Testing By Automation BD
Hello guys. Welcome to my channel. Today I make awesome and important tutorial. I hope it help you to operate Parker DC drive. Many people comment Facebook group and connect my messenger request to how to connect Parker DC drive with encoder. So I make this tutorial for you. If you have any question or suggestion please comment here. Thanks for watching. If you have a more detail about Parker DC drive. Go to channel page and hear more tutorial about Parker DC drive.
Parker DC Drive parameter setting: • PARKER DC Drive param...
How to set Parker DC Drive Default factory setting: • How to set Parker DC D...
Home Automation: • Home automation using ...
LED Patterns with Arduino 10 LED and 12 Patterns: • LED Patterns with Ardu...
Diy Over Current and Short Circuit Protection AC 230V: • Diy Over Current and S...
How to make Ardunio Digital Clock: • How to make Arduino Di...
How to make auto cut off 12V battery charger: • How to make auto cut-o...
-----------------------------------------------------------------
Subscribe Automation BD: bit.ly/2DyLaeE
-----------------------------------------------------------------
Connect with us......................................
Blog Post: bit.ly/2Zx81jh
Face Book Group Link: bit.ly/2ZCrK1S
Our Blog Link: automationbd1....
#Parker_DC_Drive #Encoder_Connection #Automation_BD
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
![⭐ฮิตในTikTok!! ( มะมะมะหมูเด้ง MooDeng ) Ver. แดนซ์ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/4noyAoMa7bQ/mqdefault.jpg)
Today learn again about Parker dc drive. Thanks
Very Good sharing
Thank you recommendation. I used an optical encoder for my robot which uses dead reckoning to measure distance traveled.
Nice Sharing
Sir, please tell me whether it is necessary to change any parameters in the DC drive to get pulse signal from A_ and B_ in the encoder or will the drive run without any problem by connecting these in place of A and B wires?
Enter the drive Configure find the ENCODER SIGN and change there POSITIVE to NEGATIVE.
Sir, in Parker 590 drive, when the motor runs and material is put in the stand, the RPM of the motor drops by 50-60 which leads to misroll. Please tell me its solution.
Check your Current limit and positive I claim
sir, कृपया बताएं कि एनकोडर में A_ और B_ से पल्स सिग्नल लेने के लिए क्या डी सी ड्राइव में कोई पैरामीटर चेंज करने जरूरी होते हैं या A व B की वायर की जगह इनको जोड़कर ड्राइव बिना किसी समस्या के रन हो जाएगी?
Go to CONFIGURE drive there Speed feedback selection in Select ENCODER.
@@AutomationBD sir, shayad aap question nhi samjhe. Agar hum encoder se plus signal ke liye A,B ki jagah A_B_ ki encoder wire use kare to kon se parameter change krne padenge
Sir agr chakr back ko chiya jo pin lgta hai Bata skte hai
Please write English. Thanks for stay with us.
please make an video on Autotune process in parker dc drive
Ok
need set encoder resolution ENCODER LINES = 1000 (factory setting) and max prm for motor ENCODER RPM = 1000 (also factroy setting)
You can set
1. Encoder Line = Encoder Resolution
2. Encoder RPM = Motor maximum RPM
Wiring ka diagram video banaa kar do
Ok, noted your requirement. Please don't forget subscribe my channel.
Why use 2 channel and how to measure the encoder pulse
For Forward and Reverse rotation.
Thank you
How to measure the encoder pulse
No need measure pulse. Check Feedback dc voltage of Encoder broad.
Thanks
👍👍
Bhai Parker drive mein Field Back Kaise hataye setting mein bhai iska video banaaiye
Sar DC motor ka diagram padhna sikhao sar
Commentary????
What do you mean??