So right now ive got: Cold Air Intake BOV SFR 1.5 TUNE ISR catback exhaust Would it be safe to purchase a turbo kit and slap it on there professionally installed and tuned at decent boost? Really just looking to get over the 300s without killing the car. Ive got a 2012 2.0t.
Looks like south florida. Who did your tune? Runs nice. I have a 2010 built long block it runs nice just keep cracking topmount manifolds. Is that the divided obx topmount? Im thinking the cast cpe maybe but not sure if they make it with a t3 flange. I made almost 500 but kept having fuel pressure problems so they tuned it down to 418. So need a mani and a tune for e85. If you have any advice for topmount id appreciate it big. Hows the obx holding up.
Its Tuned by Karel Tuning in hialeah. The shops name is worldwide turbo. get a Bigger fuel pump like a 320 lph and some e85 capable injectors. ive had the car for almost 5 years now and never cracked the manifold.... im currently making 600+ hp on the same set up with a bigger set of injectors and e85. plus a fully built and cammed head.
Damn good shit bro i just picked up a 2013 2.0 n im tryna go top mount as well good info especially on the tuner i live in homestead but id make that drive if they tune for a decent price
@KingShaln I mean that turbo is rated for 500 to 750 whp lol so even what you’re saying would still be low considering. Homie should of honestly just got a smaller turbo, that one is a bit much lol.
@@cooliodiablo4571 ong bro every gen owners just slaps on a 3076 and expects good power when they have no supporting mods. Those injectors won’t flow well to support 20 psi and stock motor he won’t be able to crack 450 especially without e85
KBxFifa I did everything myself except for the tune. U can re-use the stock intercooler piping. You just have to cut the hot side in two and rotate it .
That turbo sounds so nice like 18 wheeler truck
The turbo spool sounds soooo good inside the car 😍
That turbo spool is insane
This has the loudest spool i've heard from a gtx3076r especially for only 14psi is it the external wastegate?
if you look at the 1st pull in the car its hits 23lbs of boost, most likely boost by gear
That sounds insane for a 2.0t. What made it sound like that? The turbo and tomei exhaust? Sounds amazing👌🏼
now all you need is a decent set of wheels
Rico Baca and a rear bumper cover.
Sounds sick!
Is this car still holding up?
Did u have upgrade 02 housing or manifolds for bk2 ?
What size turbine housing? Sound great 👍
Where did u get ur turbo kit and what size is it
So right now ive got:
Cold Air Intake
BOV
SFR 1.5 TUNE
ISR catback exhaust
Would it be safe to purchase a turbo kit and slap it on there professionally installed and tuned at decent boost? Really just looking to get over the 300s without killing the car.
Ive got a 2012 2.0t.
KBxFifa mine made 354whp on 20psi. I beat on it pretty hard. It’s been running like this since late 2015.
Look at my parts list in the description
KBxFifa u should be fine with the same size turbo on my car. But you need a good tuner.
most you can get in a 2012 is low 300s at the crank, barely 300 at the wheel with a big turbo upgrade and a perfect tune
the dude with the widebody that made 400hp with a cxracing turbo kit is blowing up
Hellll yeahhhhh
Is this a 2.0 or 3.8?
Bro its the 2.0 turbo
Sounds great I can ear the jetttt
Looks like south florida. Who did your tune? Runs nice. I have a 2010 built long block it runs nice just keep cracking topmount manifolds. Is that the divided obx topmount? Im thinking the cast cpe maybe but not sure if they make it with a t3 flange. I made almost 500 but kept having fuel pressure problems so they tuned it down to 418. So need a mani and a tune for e85. If you have any advice for topmount id appreciate it big. Hows the obx holding up.
Its Tuned by Karel Tuning in hialeah. The shops name is worldwide turbo. get a Bigger fuel pump like a 320 lph and some e85 capable injectors. ive had the car for almost 5 years now and never cracked the manifold.... im currently making 600+ hp on the same set up with a bigger set of injectors and e85. plus a fully built and cammed head.
Damn good shit bro i just picked up a 2013 2.0 n im tryna go top mount as well good info especially on the tuner i live in homestead but id make that drive if they tune for a decent price
354hp that's it?? Should been making 400 atleast
That's what I was wondering, especially with upgraded injectors.
Pulls on the Dyno as if it has 390-400whp the Dyno must be reading low where he’s at lol
@@pulsar_sal OK its just cause stuffed turbo I'm almost doing those numbers. I was on mustang dyno aswell
@@SOMEGANGSTER Yeah somethings not right
With that Turbo and mods listed he should be getting practically double the amount of hp he did here honestly. It doesn’t make a lot of sense lol.
How did you get the obx manifold to fit properly
they used to have an issue with thier manifolds but they resolved it a while back.
Oh true. how much did pay for one?
Rithu Vivek so did you install it yourself or did you have someone do it?
Did you upgrade the fuel pump as well?
what turbo can I run on a mxp manifold?
How much was the turbo.
How did you run the vaccum lines from the boost controller?
Grim speed has a good kit that comes with some line. But if u want it to look cleaner u gotta get hard plastic lines with push fittings.
What type of gage is that
Pro sport evo
Fix your windshield
How is this barely pushing 354??
He running like 14/15 psi which is pretty conservative. On the garret 3076r turbo, 22/23 psi will get you to 400 whp with fbo
@KingShaln I mean that turbo is rated for 500 to 750 whp lol so even what you’re saying would still be low considering. Homie should of honestly just got a smaller turbo, that one is a bit much lol.
@@cooliodiablo4571 ong bro every gen owners just slaps on a 3076 and expects good power when they have no supporting mods. Those injectors won’t flow well to support 20 psi and stock motor he won’t be able to crack 450 especially without e85
@@PTheDon I’m pushing 430whp on 23 psi and 516 whp on 28 psi stock bk1 block.
@@pulsar_saldid you have to touch the internals at all?
Did you get this installed? Or did you do it yourself?
KBxFifa I did everything myself except for the tune. U can re-use the stock intercooler piping. You just have to cut the hot side in two and rotate it .
did it myself. its not alotta work.
👰♂️배기음 좋치 ㅋ