Same issue happened to me today! second time using it and it died without any signs it was going out. 'I even tested it lastnight. Im going to buy a relay tomorrow. Thank you sir!
first video ive ever seen addressing this issue on this pump. I had same problem and just bought a new one. however i am glad i did not throw out the old one. great video.
Darn smart thinking. Most people would toss it since they are too lazy to troubleshoot an issue. Fixing it is a great sense of accomplishment. Auto zone, I don't think i would have thought to look there. Good for you Dennis!
I gotta be honest. I’d be one of the impatient people that would’ve just chunk it. I just switched to a different style 12 volt pump (Pumptec x6) but I’ll remember this if I go back to these.
I had a similar pump on my tow behind sprayer. I found out the hard way that when done spraying Round-up you better flush and rinse well or it ain't going to work the next time. The relay you replaced looked like typical headlight relay for automotive use.
@@doitallgaragetx Nope, and even though you fix it yourself, it wasn't free. Your time is worth money, you could have been productive or taking a well desired break from it all. That pump looked near brand new too. At least it keeps you away from the news. Looks hot as shit there too Bro. Have a cool one one me.
Just switched from 5.5 to 7 gpm. First one I hand tightened my banjo fittings on with thread tape. Cracked. Bought a second one. Same exact shit I took my time and was extremely careful and it’s leaking stuff everywhere. How does everflo make shit products like this? I have a buddy who just spent $550 on two. Replaced one of the heads and even that cracked. Never again will I do business with everflo. I just watched $500 disappear.
Thanks for sharing. I am sure that this happens more frequently than what most people realize. My question is, what did you do to prevent this from happening again? How did you make it watertight?
Good question. When they work, they work great. Capable of reaching 2 stories + with ease. However, I had nothing but problems with it. I went back to using my 5.5 gpm Northstar pumps. In all fairness, I was and still am using 1/2" id hose, so that could have contributed to the 7gpm pump having problems. Some washers swear by the 7's and say they last for years, that just wasn't the case for me, unfortunately.
How long do they last I’m getting ready to build my first system for my son and I pressure washing business…. I’m trying to see which one last long Everflo or Delavan
The problem with 12v pumps is that they can last 2yrs or 2 mins. You never know. 1st pump I bought was a 5.5gpm Northstar. It lasted over a yr. Bought another, it lasted like 5 jobs. Bought a 3rd, I'm going on like 9 months with no issues. I haven't plumbed in my 7gpm since I repaired it. Once my 5.5 dies, I will plumb in the 7 and buy another 7 for back up. Join pressure washing friends on Facebook. Lots of info on softwash systems
Hello buddy quick question I’m building my own trailer and I’m putting together my 5.5gpm pump from norther and tool for some reason that pump it’s not pulling 5.5 it’s pulling 3gpm and if I open the valve for my soap and chlorine slow down a lot don’t even pull the soap or the chlorine Thanks in advance
If u are using a proportioner, you may have an air leak on the suction side somewhere. Could also be a weak battery. I'd love the convenience of a proportioner, but don't want the headaches. I just batch mix and use drop sticks
@@mocciasoftwash4714 yes. Anything past 200' and you will lose pressure, distance and suction. I'd recommend cutting it down to about 250' and go from there. You should also pressure test your proportioner and suction lines by spraying soapy water on them.
Same issue happened to me today! second time using it and it died without any signs it was going out. 'I even tested it lastnight. Im going to buy a relay tomorrow. Thank you sir!
Glad to help! Thanks for watching!
first video ive ever seen addressing this issue on this pump. I had same problem and just bought a new one. however i am glad i did not throw out the old one. great video.
Thanks! Glad to help!
ive got one on the way-this is excellent knowledge to have Ill make sure to have a extra relay thank you sir!
Glad to help. Thanks for watching!
Darn smart thinking. Most people would toss it since they are too lazy to troubleshoot an issue. Fixing it is a great sense of accomplishment. Auto zone, I don't think i would have thought to look there. Good for you Dennis!
Thanks, dude. I was pretty ticked off when it quit working, but I figured it was something simple because I only used a few times.
I gotta be honest. I’d be one of the impatient people that would’ve just chunk it. I just switched to a different style 12 volt pump (Pumptec x6) but I’ll remember this if I go back to these.
Great video!! Thank you for taking the time to pass on this info.
Thanks
Thanks for the time and information. Very useful!
Hope it helps you out. Thank you for watching!
Great information
Thank you.
If you like, check out my other pressure washing channel: clean industries pressure washing.
Need connection hoses for my Model EF7000, 60 PSI 12 volt. To a Spotless water system. To my power washer.
That was helpful!
Thank you.
Very detailed and smart thinking, Thank You
Preciate ya! Thanks for watching!
I had a similar pump on my tow behind sprayer. I found out the hard way that when done spraying Round-up you better flush and rinse well or it ain't going to work the next time. The relay you replaced looked like typical headlight relay for automotive use.
I've got two 5.5gpm pumps in the graveyard. I'm gonna tinker with those next.
@@doitallgaragetx And they only go bad at the worst possible moment.
@@x-man5056 it's NEVER convenient
@@doitallgaragetx Nope, and even though you fix it yourself, it wasn't free. Your time is worth money, you could have been productive or taking a well desired break from it all. That pump looked near brand new too. At least it keeps you away from the news. Looks hot as shit there too Bro. Have a cool one one me.
@@x-man5056 106° yesterday!!!
Just switched from 5.5 to 7 gpm. First one I hand tightened my banjo fittings on with thread tape. Cracked. Bought a second one. Same exact shit I took my time and was extremely careful and it’s leaking stuff everywhere. How does everflo make shit products like this? I have a buddy who just spent $550 on two. Replaced one of the heads and even that cracked. Never again will I do business with everflo. I just watched $500 disappear.
Yep. I had nothing but issues out of mine. Went back to my 5.5 gpm Northstar.
Thank you so much sir!
Thanks for sharing. I am sure that this happens more frequently than what most people realize. My question is, what did you do to prevent this from happening again? How did you make it watertight?
I went back to my 5.5gpm. Once I start using the 7 again, it will be in a water tight box. Silicone may work as well.
how good is that pump for softwashing would you recommend it and does it reach a 2-3 story home
Good question. When they work, they work great. Capable of reaching 2 stories + with ease. However, I had nothing but problems with it. I went back to using my 5.5 gpm Northstar pumps. In all fairness, I was and still am using 1/2" id hose, so that could have contributed to the 7gpm pump having problems. Some washers swear by the 7's and say they last for years, that just wasn't the case for me, unfortunately.
thanks for sharing
Thanks for watching!
Hey, I cant use my hot water pressure. the water flow is bad. any advice?
👍
How long do they last I’m getting ready to build my first system for my son and I pressure washing business…. I’m trying to see which one last long Everflo or Delavan
The problem with 12v pumps is that they can last 2yrs or 2 mins. You never know. 1st pump I bought was a 5.5gpm Northstar. It lasted over a yr. Bought another, it lasted like 5 jobs. Bought a 3rd, I'm going on like 9 months with no issues. I haven't plumbed in my 7gpm since I repaired it. Once my 5.5 dies, I will plumb in the 7 and buy another 7 for back up. Join pressure washing friends on Facebook. Lots of info on softwash systems
Hello buddy quick question I’m building my own trailer and I’m putting together my 5.5gpm pump from norther and tool for some reason that pump it’s not pulling 5.5 it’s pulling 3gpm and if I open the valve for my soap and chlorine slow down a lot don’t even pull the soap or the chlorine
Thanks in advance
If u are using a proportioner, you may have an air leak on the suction side somewhere. Could also be a weak battery.
I'd love the convenience of a proportioner, but don't want the headaches. I just batch mix and use drop sticks
@@doitallgaragetx thanks!! Do you think 300ft hose it to much?
@@mocciasoftwash4714 yes. Anything past 200' and you will lose pressure, distance and suction. I'd recommend cutting it down to about 250' and go from there. You should also pressure test your proportioner and suction lines by spraying soapy water on them.
@@doitallgaragetx thanks a lot man
Ty good video